Whirlpool AWO/C 71000 INSTRUCTION FOR USE
GB
PROGRAMME CHART
“ Door open” indication A.
This washing machine is equipped with
automatic safety functions which detect
and diagnose faults at an early stage and
react appropriately, e.g.:
“Service” indication B.
“Water tap closed” indication C.
“Clean pump” indication D.
Max.
Programme
Care
Labels
Load
Cotton
95 °C
Cotton
40 - 60 °C
SuperEco
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 °C
Daily load
40 °C
Quick wash
30 °C
95 °C
40 - 60 °C
60 °C
30 - 40 - 60 °C
30 °C
30 °C
30 °C
Wool
Cold - 40 °C
- 40 °C
Handwash
40 °C
40 °C
Rinse & Spin ------- 7. 0
Spin ------- 7. 0
Drain ------- -------
C A
D
Type of wash/Notes
Kg
- Respect the manufacturer’s recommendations on the care label
Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or
stains, you can add an oxygen-based bleach additive which can be used at 95°C.
7.0
This programme eliminates bacteria, ensuring sanitization of your laundry.
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made
7.0
of cotton and linen.
Heavily soiled and robust laundry made of cotton, synthetics and their blends.
Economical energy consumption by prolonged wash duration - ideal to be run overnight to pro t from more favourable energy rates. Avoid noise of spinning at night by
7.0
setting the spin speed to “0” and star t spin programme in the morning, or by de ning
programme start with “Start delay” accordingly. - For garments with a high share of
synthetic bres, we recommend to use a laundry net.
Normally soiled garments made of arti cial bres (like polyester, polyacryl, viscose etc.)
3.0
or their blends with cotton.
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
1.5
Slightly to normally soiled robust laundry made of cotton, linen, arti cial bres and their
blends.
4.0
E ective one-hour programme. Make sure to wash only similar colours together in one
wash load.
Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.
4.0
Brief programme to refresh your laundry.
Only woollens, labelled with the Woolmark and identi ed as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for machine
1.0
washable wool.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
Care programme with a very gentle spin. This programme (40°C) is tested and approved
1.0
by The Woolmark Company for handwashable wool.
Same as the last rinse and the nal spin in the “Cotton” programme.
Intensive spin. Same as spin cycle in the “Cotton” programme.
Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.
I
Programme selectorE.
“Start/Pause” button F.
B
J
“Spin“ button G.
“Start delay” button H.
Programme sequence indicatorI.
E
F
H
Detergents and
additives
Main
Pre-
wash
wash
Softener
Pre-
wash
Rapid
G
Clean+ Cold
wash
“Reset” button J.
Special options
Intensive
rinse
Easy
ironing
Rinse
hold
Spin
Start
delay
Max.
Spin
Speed
rpm
Yes ------- -------
Yes
------- Yes ------- ------- ------- -------
Yes -------
Yes ------- ------- ------- -------
------- Yes ------- ------- -------
------- Yes ------- ------- ------- ------- -------
------- Yes ------- ------- ------- ------- -------
------- Yes ------- ------- ------- ------- ------- 400
------- ------- ------- ------- ------- ------- -------
------- ------- ------- ------- ------- ------- ------- ------- ------- -------
max.
max.
max.
max.
max.
max.
max.
max.
1)
max.
max.
------- ------- ------- ------- ------- ------- ------- ------- ------- ------- ------- -------
= optional / Yes = dosing required
1) For improved garment care, spin speed is restricted in these programmes.
30106509.indd 130106509.indd 1 27-05-2011 17:34:0427-05-2011 17:34:04
Nero quadricromiaNero quadricromia
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the
washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed
according to the instructions on the garment label and those issued in this programme chart. M0619
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 06509
CONSUMPTION DATA
Programme
Temperature Load Water Energy
(°C) (kg) (l) (kWh)
Cotton 95 7.0 74*** 2.1 2:10 —
Cotton* 60 7.0 54 1.05 4:00 2:30
Cotton* 60 3.5 40 0.85 3:00 **
Cotton 40 7.0 69 0.80 3:15 2:15
Cotton* 40 3.5 40 0.65 3:00 **
SuperEco 60 7.0 69 0.84 4:00 —
Synthetics 60 3.0 50*** 0.80 1:35 1:14
Synthetics 40 3.0 46 0.50 1:20 0:59
Delicates 30 1.5 60 0.50 0:45 —
Daily load 40 4.0 45 0.50 1:00 —
Quick wash 30 4.0 45 0.40 0:30 —
Wool 40 1.0 60 0.50 0:45 —
Wool 20 1.0 60 <0.10 0:40 —
Handwash 40 1.0 45 0.50 0:40 —
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with
respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption
refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.
* Reference programmes for Energy Label.
** Automatic adaption of programme duration after detection of wash load.
*** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.
ADD DETERGENTS, CLOSE THE DOOR AND SELECT
THE PROGRAMME
Add detergent as indicated on the front page and as described
in the chapter “Detergent and Additives” in your Instructions
for Use.
SELECT ANY DESIRED OPTION
Push the button of any option desired - the respective
indication lights up.
If the combination of programme and option is not possible,
the indication lights switch o automatically. Unsuitable
combinations of options are deselected automatically.
“Prewash” button
“Rapid” button
“Clean +” button
Handwash 30 1.0 45 0.40 0:36 —
The programme duration may di er from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
removal (powder, for example “Vanish”) - it will optimize the
additive’s e ciency to get better wash performance and
stain removal.
Use with maximum load.•
Add an appropriate amount of in-wash additive for stain •
removal (powder) to the main wash chamber, together with
Turn the • programme selector to the desired programme
and temperature. The display shows the programme duration and the prede ned spin speed. The indication lamp next
to the “Start/Pause” button
blinks.
your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.
May prolong the programme by up to 15 minutes.•
Appropriate for use of stain removers and bleaches on •
oxygen basis. Chlorine or perborate bleaches must not
be used!
“Cold wash” button
Water is heated only up to 20°C.•
Suitable for delicate laundry items with wash temperature •
recommendation of max. 30° on the care label.
Mainly selectable on the lowest temperature step of the •
programmes only.
“Intensive rinse” button
Only for heavily soiled loads (for example sand, granular dirt). •
Increases the cycle time by approximately 15 min.
Do not use liquid detergent for the main wash when sele-•
cting “Prewash“ .
Enables quicker washing by shortening the programme •
duration.
Recommendable for small loads or only lightly soiled •
laundry.
Choose this option if you use an in-wash additive for stain •
More water is added and rinse cycle is prolonged.•
This option is particularly suitable for areas with very soft •
water, washing baby linen and helping people with allergies.
“Easy ironing” button
Reduces creasing by an increased water quantity and a very •
gentle spin.
“Rinse hold” button
The laundry remains in the last rinse water without progres-•
sing to the nal spin cycle to avoid creasing and prevent
colours from changing.
Particularly useful if you want to postpone spinning to a later •
Approx. Progr. Duration
(hours : minutes)
without “Rapid“ with “Rapid“
time, or if you want to drain only.
Note: The programme stops to “Rinse hold” at the time the
“Rinse hold” light in the programme sequence indication is
on. The indication lamp next to the “Start/Pause” button
blinks.
Terminate the “Rinse hold” option :
Press the • “Start/Pause” button ; the programme will
terminate automatically with the nal spin cycle for the
present wash programme.
If you do not wish to spin the clothes, turn the programme •
selector to the “Drain” programme and press the “Start/
Pause” button
.
“Spin” button
Every programme has a prede ned spin speed; press the •
button if you want to set a di erent spin speed.
If spin speed “0” is selected, the nal spinning is cancelled •
and the water is drained out only. However, intermediate
spin peaks remain during rinse.
START DELAY
The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when electricity
is cheaper. Do not use liquid detergent when activating “Start
delay”.
Select programme, temperature and options.•
Press the “Start delay” button to select the desired delay time •
between 30 minutes and 23 hours.
Press the • “Start/Pause” button
On the display, the start delay symbol and the dot between
hours and minutes blink. The countdown of the delay time
begins.
The delay time indication disappears when the program-•
me starts and it is replaced by the remaining programme
duration.
Once having pressed the • “Start/Pause” button
delay time can be reduced by pressing again the “Start delay”
button.
.
, the
To cancel the “Start delay”
Turn the programme selector to another position, or press •
the “Start/Pause” button
disappears from the display. Press “Start/Pause”
if you want to start the selected programme immediately.
- the selected start delay
again
PROGRAMME START
Open the tap and press the “Start/Pause” button .
The indication lamp next to the “Start/Pause” button lights
up. The programme sequence indicator shows the current
programme phase, running from left to right through Wash,
Rinse, Drain/Spin.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights
to show that the door can be opened. As long as a wash
programme is running, the door remains locked and must on
no account be forced open. In case you have an urgent need to
open it during a running programme, refer to “Cancel a running
programme before the end”.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Service”
Lighting up of the “Service” indication can be caused by a fault
in an electrical component.
“Water tap closed”
The washing machine has no or insu cient water supply; the
water tap might be closed or the water inlet hose kinked.
“Clean pump”
Waste water is not pumped out. The drain hose may be
kinked or the lter must be cleaned (see “Cleaning the
lter” in your Instructions for Use).
PROGRAMME END
All the lights of the programme sequence indicator are o , •
and the “Door open” indication
Turn the programme selector to the “O /O” position.1.
Close the water tap.2.
Open the door and unload the machine.3.
Leave the door ajar to allow the drum to dry.4.
lights up.
CHANGE PROGRAMME AND/OR OPTIONS AFTER
PROGRAMME START
Press the 1. “Start/Pause” button to pause the
programme. The light blinks.
Select the new programme and, if you want, any options.2.
Press the 3. “Start/Pause” button
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
again. The new
CANCEL A RUNNING PROGRAMME BEFORE THE
END
The “Reset” button cancels a programme before the end.
Press and hold the • “Reset” button
existing water is drained out. It may last some time until the
door can be opened.
Whirlpool is a registered trademark of Whirlpool USA.
for a few seconds. Any
5019 301 06509
30106509.indd 230106509.indd 2 27-05-2011 17:34:0827-05-2011 17:34:08
Nero quadricromiaNero quadricromia
Loading...