Whirlpool AWO/C 70801 INSTRUCTION FOR USE

30106581GB.fm Page 1 Tuesday, November 8, 2011 11:00 AM

GB AWO/C 70801, AWO/C 71001 PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication D. “Clean pump” indication

Max.

Programme

Care

Labels

Load

C D

Ty pe of w a s h / N o t e s

- Respect the manufacturer’s recommendations on the care label

}

A B

E. Programme selector

F. “Start/Pause” button

G. Spin speed selector

H. Programme sequence indicator

Detergents and additives Special options

Prewash Main

wash

Softener Start

and start delay indicators

I. “Reset” button

Rapid Prewash Intensive

delay

rinse

Rinse

hold

Spin

Max.

Spin

Speed

rpm

Cotton

95 °C

Cotton

40 - 60 °C

SuperEco

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

30 - 40 °C

Rinse & Spin

95 °C

40 - 60 °C

60 °C

30 - 40 - 60 °C

30 - 40 °C

40 °C

30 °C

- 40 °C

30 - 40 °C

—

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive which can be used at 95°C.

7.0

This programme eliminates bacteria, ensuring sanitization of your laundry.

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

7.0

Heavily soiled and robust laundry made of cotton, synthetics and their blends. Economical energy consumption by prolonged wash duration - ideal to be run overnight to profit from more favourable energy rates. Avoid noise of spinning at night by setting the spin speed to “0” and start spin programme in

7.0

the morning, or by defining programme start with “Start delay” accordingly. - For garments with a high share of synthetic fibres, we recommend to use a laundry net.

Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton.

3.0

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

1.5

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

4.0

Effective one-hour programme. Make sure to wash only similar colours together in one wash load.

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

4.0

Brief programme to refresh your laundry.

Only woollens, labelled with the Woolmark and identified as machine washable.

1.0

This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

Textiles made of linen, silk, wool and viscose marked as “handwashable”. Care programme with a very gentle spin. This programme (40°C) is tested and approved by The Woolmark Company

1.0

for handwashable wool.

Same as the last rinse and the final spin in the “Cotton” programme.

7.0

Ye s

❉

—

❉

—

❉❉— ❉❉❉❉

Ye s

❉❉❉❉ ❉ ❉❉

Ye s

❉ ❉ —— ❉ ❉ ❉

Ye s

❉ ❉ ❉ ❉ ❉ ❉ ❉

Ye s

❉❉— ❉ — ❉❉

Ye s

❉❉—— ❉❉❉

Ye s

❉❉—— — ❉❉

Ye s

❉ ❉ — — — ❉ ❉

Ye s

❉❉—— — ❉❉

400

—— ❉❉—— ❉❉❉

max.

Spin

Drain

❉ = optional / Yes = dosing required.

For improved garment care, spin speed is restricted in these programmes.

Black process 45,0° 150,0 LPI

—

——

Intensive spin. Same as spin cycle in the “Cotton” programme.

7.0

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0619

—— — ❉ —— — —❉

max.

—— — ❉ —— — ———

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06581

30106581GB.fm Page 2 Tuesday, November 8, 2011 11:00 AM

CONSUMPTION DATA

Programme Te m p e r a t u r e

Cotton 95 7.0 74* 2.10 2:10 — Cotton** 60 7.0 54 1.05 4:00 2:30 Cotton** 60 3.5 40 0.85 3:00 Cotton 40 7.0 69 0.80 3:15 2:15 Cotton** 40 3.5 40 0.65 3:00

SuperEco 60 7.0 69 0.84 4:00 — Synthetics 60 3.0 50* 0.80 1:35 1:14 Synthetics 40 3.0 46 0.50 1:20 0:59 Synthetics 30 3.0 46 0.30 1:16 0:55

Delicates 30 1.5 60 0.50 0:45 — Daily load 40 4.0 45 0.50 1:00 —

Quick wash 30 4.0 45 0.40 0:30 —

Wool 40 1.0 60 0.50 0:45 — Wool 20 1.0 60 <0.10 0:40 —

Handwash 40 1.0 45 0.50

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).

* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the water is drained out. ** Reference programmes for Energy Label. *** Automatic adaptation of programme duration after detection of wash load.

Handwash 30 1.0 45 0.40

(°C)

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

• Turn the programme selector to the desired programme and temperature.

• The indication lamp next to the “Start/Pause” button

blinks.

•The indication lamp of the predefined spin speed lights up.

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective indication lights up. If the combination of programme and option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt). Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when selecting “Prewash”.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies.

Load

Wat er

(kg)

Energy

(l)

Approximate programme duration

(kWh)

without “Rapid” with “Rapid”

0:40 — 0:36 —

(hrs.min)

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• Particularly useful if you want to postpone spinning to a later time, or if you want to drain only. Note: The programme stops to “Rinse hold” at the time the “Rinse hold” light in the programme sequence indication is on. The indication lamp next to the “Start/

Pause” button blinks.

Terminate the “Rinse hold” option :

• Press the “Start/Pause” button ; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme

selector to the “Drain” programme and press the “Start/

Pause” button .

“Spin” button

• Every programme has a predefined spin speed; press the

button if you want to set a different spin speed.

• If spin speed “0” is selected, the final spinning is cancelled

but intermediate spin peaks remain during rinse. The

water is drained out only.

***

“Rapid” button

• Enables quicker washing by shortening the programme

duration.

• Recommendable for only lightly soiled laundry.

START DELAY

The “Start delay” allows to run the machine at the

consumer’s convenience, for example at night when electricity

is cheaper. Do not use liquid detergent when activating “Start

delay”.

• Select programme and options.

• Press the “Start delay” button to select the desired delay

time of 1, 3, 6, 9 or 12 hours.

• Press the “Start/Pause” button .

The indication light of the “Start delay” button blinks and

the countdown of the delay time begins.

• The time delay indication disappears when the

programme starts and it is replaced by the programme

sequence indication.

• Once having pressed the “Start/Pause” button , the

delay time can be reduced by pressing again the “Start

delay” button.

To cancel the “Start delay”

...before you press the “Start/Pause” button :

• Turn the programme selector to another position or press

the “Reset” button .

...after having pressed the “Start/Pause” button :

• Press the “Start/Pause” button - the light of the

selected start delay goes off. Press “Start/Pause”

again if you want to start the selected programme

immediately.

PROGRAMME START

Open the tap and press the “Start/Pause” button . The

indication lamp next to the “Start/Pause” button lights

up. The programme sequence indicator shows the current

programme phase, running from left to right through Wash,

Rinse, Drain/Spin.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the programme. The light blinks.

2. Select the new programme and, if you want, another spin speed and any options.

3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button for a few seconds. Any existing water is drained out. It may last some time until the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06581

Black process 45,0° 150,0 LPI