Whirlpool AWO/C 70080, AWO/C 70081 INSTRUCTION FOR USE

PROGRAMME CHART

A. “ Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication

D. “Clean pump” indication

Max.

Programme

Care

Labels

Load

Cotton whyte with prewash

95 °C

Cotton

95 °C

Cotton

40 - 60 °C

Cotton rapid

60 °C

Synthetics

with prewash

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

95 °C

40 - 60 °C

60 °C

30 - 40 - 60 °C

30 °C

- 40 °C

40 °C

max.

3.0

1.5

3.0

1.0

Rinse & Spin ------- max.

Spin

------- max.

Short Spin ------- 1.0

Drain ------- -------

 = optional / Yes = dosing required

1) For improved garment care, spin speed is restricted in these programmes.

Type of wash/Notes

- Respect the manufacturer’s recommendations on the care label

Heavily soiled, long-wearing and stable textiles made of cotton and linen (bed linen, table linen, underwear, towels etc.).

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive which can be used at 95°C. This programme eliminates bacteria, ensuring sanitization of your laundry.

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Normally to heavily soiled cotton laundry washable at 60°C. Faster alternative to “Cotton” programme for washing your cotton laundry at 60°C.

Heavily soiled laundry made of articial bres (like polyester, polyacryl, viscose etc.) or their blends with cotton.

Normally soiled garments made of articial bres (like polyester, polyacryl, viscose etc.) or their blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton. Brief programme to refresh your laundry.

Only woollens, labelled with the Woolmark and identied as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

Textiles made of linen, silk, wool and viscose marked as “handwashable”. Care programme with a very gentle spin. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

Same as the last rinse and the nal spin in the “Cotton” programme.

Intensive spin. Same as spin cycle in the “Cotton” programme.

Gentle spin. Same as spin cycle in the “Wool” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0619

E. Programme selector

F. “Start/Pause” button

G. Programme sequence indicator

H. “Reset” button

Detergents and additives Special options

Pre-

wash

Main wash

Softener

Spin speed

reduction

Rinse

hold

Max. Spin

Speed

rpm

Yes Yes

------- Yes

Yes Yes

------- Yes

max.

------- Yes 400

------- -------

------- ------- ------- -------

max.

------- ------- ------- ------- ------- -------

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 06563

30106563GB.indd 1 14/10/11 09.38

CONSUMPTION DATA

Programme

Cotton 95 max. 59 1.90 2:00 Cotton* 60 max. 49 0.78 4:00 Cotton* 60 3.0 37 0.70 2:30

Cotton 40 max. 60 0.70 2:45 Cotton* 40 3.0 37 0.60 2:30

Cotton rapid 60 max. 49 1.02 2:20

Synthetics 60 3.0 50 0.80 1:35 Synthetics 40 3.0 46 0.50 1:20 Synthetics 30 3.0 46 0.30 1:16

Delicates 30 1.5 60 0.50 0:45

Quick wash 30 3.0 41 0.40 0:30

Wool 40 1.0 60 0.50 0:45 Wool 20 1.0 60 <0.10 0:40

Handwash 40 1.0 45 0.50 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption data refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may dier from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

* Reference programmes for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Temperature

(°C)

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

• Turn the programme selector to the desired programme and temperature. The indication lamp next to the “Start/Pause” button blinks.

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Progr. Duration

(hours : minutes)

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• Particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Note: The programme stops to “Rinse hold”

at the time the “Rinse hold” light in the

SELECT ANY DESIRED OPTION

programme sequence indication is on. The indication lamp next to the “Start/Pause”

Push the button of any option desired - the

button

blinks.

respective indication lights up.

If the combination of programme and option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Spin speed reduction” button

• Reduces the predetermined automatic maximum spin speed to treat your laundry more gently.

Terminate the “Rinse hold” option

• Press the “Start/Pause” button programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector to the “Drain” programme and press the “Start/Pause” button

; the

PROGRAMME START

Open the tap and press the “Start/Pause” button .

The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Drain/Spin.

“DOOR OPEN” INDICATION

Before star ting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose k inked.

“Clean pump”

Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication

lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the programme. The light blinks.

2. Select the new programme and, if you want, any options.

3. Press the “Start/Pause” button

again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button

for a few seconds. Any existing water is drained out. It may last some time until the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 06563

30106563GB.indd 2 14/10/11 09.38