Whirlpool AWO/C 52000, AWO/C 51000, AWO/C 52200 INSTRUCTION FOR USE

GB PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with
automatic safety functions which detect
and diagnose faults at an early stage
and react appropriately, e.g.:

B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication

Programme

Care

Labels

Max.
Load

kg

Cotton/

Antibacterial

5.0

95 °C

Cotton

40 - 60 °C

SuperEco

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

20 - 40 °C

Handwash

40 °C

Lingerie

30 °C

5.0

5.0

3.0

1.5

3.0

3.0

1.0

1.0

1.0

Rinse & Spin – 5.0

Spin – 5.0

Drain – –

i : option / Yes : dosing required

1)

For improved garment care spin speed

is restricted in these programmes.

H

C
D

E

Type of wash / Notes

- respect the manufacturer's recommendations on the care label

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or
stains, you can add an oxygenbased bleach additive which can be used at 95°C. This
programme eliminates bacteria, ensuring sanitization of your laundry.

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.

Heavily soiled and robust laundry made of cotton, synthetics and their blends.

Economical energy consumption by prolonged wash duration - ideal to be run overnight to
profit from more favourable energy rates. Avoid noise of spinning at night by setting the
spin speed to “0” and start spin programme in the morning, or by defining programme start
with “Start delay” accordingly. - For garments with a high share of synthetic fibres, we
recommend to use a laundry net.

Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose
etc.) or their blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and
their blends. Effective one-hour programme. Make sure to wash only similar colours
together in one wash load.

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

Brief programme to refresh your laundry.

Only woollens, labelled with the Woolmark and identified as machine washable.

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

This programme is particurarly suitable to treat delicate lingerie (use of laundry net
strongly recommended).

Same as the last rinse and the final spin in the “Cotton” programme.

Intensive spin. Same as the spin cycle in the “Cotton” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.

E. Programme selector

A

B

I

F

J

Detergents and Additives Special options

Pre-

Main

Wash

Yes

Yes

Yes

Yes

Softener Pre-

wash

i i

i i i i i i i i i i

– –

i

i i i i

i i

– –

i

– –

i

– –

i

– –

i

– –

i

– –

i

wash

i

i

– Yes

i

i

– Yes

– Yes

– Yes

– Yes

– Yes

– –

– – – – –

– – – – –

G

Rapid Start

delay

–

i i

i

–

i

i

i

i

i

i

i

i

i

F. “Start/Pause” button
G. Spin speed selector
H. Programme sequence indicator
I. “Reset” button
J. “Start delay” button

Acustic noise level :

Washing - 59 dB(A) / 1 pW
Spinning - 1400 rpm 77 dB(A) / 1 pW

- 1200 rpm 75 dB(A) / 1 pW

- 1000 rpm 74 dB(A) / 1 pW

Clean+ Cold

–

–

–

–

–

–

–

–

– –

– – – – –

– – – – – – –

Intensive

wash

rinse

–

i i

i i i i i

i

i i i i i

i

i

i

i

Whirlpool is a registered trademark of Whirlpool USA.

Easy

Rinse

hold

Spin

ironing

i i i i

–

i i

– –

– –

– –

– –

– –

i

i i

i i

i i

i i

i i

–

i i

5019 301 01222

Max
Spin

Speed

rpm

Max.

Max.

Max.

Max.

1)

1000

Max.

Max.

1)

1000

1)

400

1)

400

Max.

Max.

i

CONSUMPTION DATA

Programme

Cotton/Antibacterial 95 5.0 59* 1.90 2:00 -

Cotton ** 60 5.0 49 0.85 4:00 2:30
Cotton ** 60 2.5 37 0.70 2:20 ***

Cotton 40 5.0 54 0.65 2:45 1:45

Cotton ** 40 2.5 37 0.60 2:30 ***

SuperEco 60 5.0 51 0.72 4:00 ­Synthetics 60 3.0 50* 0.70 1:30 1:09
Synthetics 40 3.0 46 0.50 1:15 0:54

Delicates 30 1.5 50 0.50 0:45 ­Daily load 40 3.0 45 0.45 1:00 -

Quick wash 30 3.0 40 0.40 0:30 -

Wool 40 1.0 55 0.60 0:45 -

Handwash 40 1.0 45 0.60 0:40 -

Lingerie 30 1.0 45 0.50 0:36 -

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin
speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that
time (see also “Troubleshooting Guide” in your Instructions for Use).
*

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference programmes for Energy Label.
*** Automatic adaptation of programme duration after detection of wash load

Temperature

(°C)

ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME

Add detergents as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.

• Turn the programme selector to the desired
programme and temperature.

• The display shows the programme duration and the
predefined spin speed.

• The indication lamp next to the “Start/Pause”
button blinks.

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective
indication lamp lights up. If the combination of
programme and additional option(s) is not possible,
the indication lights switch off automatically. Unsuitable
combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand,
granular dirt). Increases the cycle time by
approximately 15 min.

• Do not use liquid detergent for the main wash when
activating the “Prewash” option.

“Rapid” button

• Enables quicker washing by shortening the

programme duration.

Load

(kg)

Water

(l)

“Clean+” button

• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it will
optimize the additive’s efficiency to get better wash
performance and stain removal.

• Use with maximum load.

• Add an appropriate amount of in-wash additive for

stain removal (powder) to the main wash chamber,
together with your detergent (only use powder
detergent with this option).
Respect the manufacturer’s dosing instructions.

• Prolongs the programme by approx. 10 to 15

minutes.

• Appropriate for use of stain removers and bleaches

on oxygen basis. Chlorine or perborate bleaches
must not be used!

“Cold wash” button

• Water is heated only up to 20°C.

• Suitable for delicate laundry items with wash

temperature recommendation of max. 30° on the
care label.

• Mainly selectable on the lowest temperature
step of the programmes only.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helps people with
allergies.

Energy

(kWh)

without “Rapid”

Approx. programme duration

(hours : minutes)

without “Rapid” with “Rapid”

• Recommendable for small loads or only lightly

soiled laundry.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics”
and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun
very gently.

“Rinse hold” button

• The laundry remains in the last rinse water without
pregressing to the final spin cycle to avoid creasing
and prevent colours from changing.

• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
Note: The programme stops to “Rinse hold” at the
time the “Rinse hold” lights in the preogramme
sequence indication is on. The indication lamp next
to the “Start/Pause” button blinks.

Terminate the “Rinse hold” option:

• Press the “Start/Pause” button; the programme
will terminate automatically with the final spin cycle
for the present wash programme.

• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” programme
and press the “Start/Pause” button.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set different spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating “Start delay” option.

• Select programme, temperature and options.

• Press the “Start delay” button to select the desired

delay time between 30 minutes and 23 hours.

• Press the “Start/Pause” button.
On the display, the start delay symbol and the dot
between hours and minutes blink. The countdown of
the delay time begins.

• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.

• Once having pressed the “Start/Pause” button,
the delay time can be reduced by pressing again the
“Start delay” button.

To cancel the “Start delay”

• Turn the programme selector to another position, or
press the “Start/Pause” button - the selected start
delay disappears from the display. Press “Start/
Pause” again if you want to start the selected
programme immediately.

PROGRAMME START

Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button
lights up. The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp
lights to show the the door can be opened. As long
as a wash programme is running, the door remains
locked and must on no account be forced open.
In case you have an urgent need to open it during a
running programme, refer to “Cancel (Reset) a running
programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a
fault in an electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply;
the water tap might be closed or the water inlet hose
kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be
kinked or the filter must be cleaned (see “Cleaning the
filter” in your Instructions for Use).

PROGRAMME END

• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O”
position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the
programme. The light blinks.

2. Select the new programme (with temperature), any
options and another spin speed if you want.

3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END

The “Reset” button cancels a programme before the
end.

• Press and hold the “Reset” button for a few seconds.
Any existing water is drained out. It may last
some time until the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01222