3gb05590a.fm Page 1 Friday, October 1, 2004 5:40 PM
GB AWO 9126 PROGRAMME CHART
A. Programme selector knob and
“Start/Pause” button
intelligent technology always guarantees perfect results with maximum efficiency whatever
6th Sense
6th Sense
the wash load.
the wash load.
intelligent technology always guarantees perfect results with maximum efficiency whatever
C
B
D
H
A
F
E
G
LCD-Display
B.
“Menu” button ( )
C.
“Back” button
D.
“Info” button
E.
“Up” and “Down” buttons to set
temperature and spin speed
F.
“OK” button for confirmation
G.
“Reset” button
H.
“Start Delay” button
Programme
Cotton
Synthetic
Daily Load
Rapid Plus
Delicates
Wool
Handwash
Rinse & Spin
Spin
Gentle Spin
Drain
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Cotone
Sintetici
Rapido
Delicati
Lana
Lavaggio a
mano
Risciacquo &
Centrifuga
Centrifuga
Centrifuga
breve
Scarico acqua
Care
Labels
Normal to heavily soiled bed linen, table
linen and underwear, towels, shirts etc.
made of cotton or linen.
Normal soiled blouses, shirts and other
outer clothing made of polyester (Diolen,
Trevira), polyamide (P erlon, Nylon) or
mixtures of these fibres with cotton.
Normal to lightly soiled textiles made of
cotton and/or easy care fibres.
Lightly soiled outer and sport clothing
made of cotton, polyester, polyamid and
mixed cotton fabrics.
Curtains and delicate dresses, skirts,
shirts and blouses.
Only woollens with a felt-free finish,
labelled with the woolmark and stated as
machine washable.
Textiles made of linen, silk, wool or
viscose marked as “handwashable”.
––
––
––
––––––
Type of w ash/
Degree of soiling
Detergent and Additives
Max.
Softener Main
load
Kg
6.0
2.5
3.0
3.0
1.5
1.0
1.0
6.0
6.0
1.5
❉
❉
❉
❉
❉
❉
❉
❉
–––
–––
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Pre-
wash
❉❉❉❉ ❉ ❉ ❉❉
❉❉❉❉ ❉
–
–
❉❉❉
–
–
wash
––
Start
Delay
Avvio
ritardato
❉
❉
❉
❉
❉
❉
❉
❉
Speed
1)
❉
1)
❉
1)
❉
2)
❉
❉
1)
❉
❉
Easy
Iron
❉❉
––
––
––
––
Extra
care
–
Tem pe -
20 to 95 1200
20 to 60 1000
30 to 60 1200
20 to 60 1200
20 to 40 1000
20 to 40 1000
20 to 30 400
––
–– –
–– –
rature
°C rpm
20 1200
Max.
Spin
Speed
1200
1000
1)
1)
1)
2)
1)
Selectable special options =
Pre-
Intensive
wash
Rinse
–
––
––
––
–
Rinse
Hold
❉❉❉❉
❉❉
–
❉
❉
❉
❉❉❉
–––
–––
Reduction
––––––––
Notes
“Prewash” can be additionally
selected for heavily soiled laundry at
any temperature.
“Prewash” can be additionally
selected for heavily soiled laundry.
–
–
–
If you select “Rinse Hold” do not
leave items to soak for too long.
If you select “Rinse Hold” do not leave
items to soak for too long. A very
gentle spin is used in this programme.
Same as the spin cycle in the
“Coloured Cotton” programme.
In this programme spinning is
intensive. Same as the spin cycle in
the “Coloured Cotton” programme.
A very gentle spin is used in this
programme. Same as the spin cycle in
the “Wool” programme.
This programme only drains (alternative
method of terminating the programme
after “Rinse Hold” without spinning). In
addition all running programmes can be
cancelled with this programme.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 05590/A
Black process 45.0° 100.0 LPI
3gb05590a.fm Page 2 Friday, October 1, 2004 5:40 PM
CONSUMPTION DA TA
Programme Temperature
Cotton
Cotton
Cotton with “Extra care” ****
Cotton
Easy Care
Easy Care
Daily Load
Rapid Plus
Delicates
Wool
Handwash
*Consumption
** The
conditions and adapt the programme run time accordingly.
*** To reduce
drains the water out.
**** Reference Programme for Energy Label
values
programme duration
the water temperature, some cold water is
*
Size of wash
(°C)
95 6.0 49*** 1.90 2:00
60 6.0 44 1.14 2:20
60 6.0 44 1.02 2:30
40 5.0 42 0.70 2:00
60 2.5 55*** 0.70 1:30
40 2.5 50 0.50 1:15
40 3.0 43 0.55 1:00
30 3.0 37 0.40 0:30
30 1.5 60 0.50 0:45
40 1.0 60 0.50 0:40
30 1.0 45 0.40 0:35
were measured in normal conditions in compliance with Standard IEC/EN 60456.
may vary from the chart values. The washing machine will allow for individual household
POUR IN DETERGENT, CLOSE THE DOOR
AND SELECT A PROGRAMME
Add the detergent as described in the chapter
“Detergent and Additives” in the booklet.
1. Turn the
programme selector knob
in any
direction to the desired programme.
This appears in the LCD display, together with spin
speed, wash temperature and wash programme
duration (in hours and minutes). The indicator light
above the
“Start/Pause”
button will blink.
2. Temperature and spin speed can be changed using
“menu”
the
button as well as the “ ” and “ ”
buttons.
The additional options available for the wash
programme can be selected with the
“menu”
button.
USING CHLORINE BLEACH
• Pour an appropriate amount of chlorine bleach into
the main wash.
• Use ONLY “R apid Plus” programme at MAXIMUM
temperature of 20°C.
PRESS THE DESIRED SPECIAL OPTION
BUTTON
“Spin Speed”
• A maximum spin speed is assigned to each
programme.
• Press the
“menu”
button until “To set Spin Speed”
appears in the LCD display. The set spin speed
blinks and can be changed with the “ ” and
“” buttons.
Water
(kg)
added at the end of the main wash cycle, before the pump
Energy
(l)
(kWh)
Programme duration **
approx.
(hours : minutes)
• If the spin speed “0” is selected, the final spin is
cancelled. The water is drained out only.
“Prewash”
• Only for heavily soiled laundry (for example. sand
or granular dirt). Programme duration is increased
by some 15 min.
“Intensive rinse”
• An additional rinse cycle is carried out.
• This additional option is particularly suitable for
areas with very soft water, for washing baby linen
and helping people with detergent allergies.
“Rinse hold”
• The laundry remains in the last rinse water without
being spun: discoloration of the laundry and
additional creasing are prevented.
• This option is particularly recommended for the
programme “Easy Care” or “Delicates”.
• This additional function is particularly useful if you
want to postpone spinning to a later time.
Note:
The programme has reached “Rinse hold” when
the corresponding symbol blinks in the LCD.
Terminate the “Rinse Hold” option:
•Press the
“Start/Pause”
button; the programme
will terminate automatically with the appropriate
spin cycle for the current programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to “Drain” and press the
“Start/Pause”
button.
“Extra care”
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption can be achieved.
“Easy Iron”
• To lessen creasing, the water quantity is increased
and the clothes are spun very gently at reduced
power. This makes your laundry significantly
damper at the end of the programme.
STORE INDIVIDUAL PROGRAMME
(“Memory”)
• Turn the programme selector to “Memory”.
• Select one of the 10 storage spaces using the “ ”
or “ ” button and confirm with
“OK”
.
• A list of all the available wash programmes appears
in the LCD. Select the desired programme with
“” and “” and confirm with
“OK”
.
• You can then, as already described, select additional
options for the wash programme and set
temperature and spin speed as desired.
• When all the settings have been made and
confirmed with
“OK”
, the programme is stored in
the selected storage space and can be reselected at
any time and run using
“Start/Pause”
.
START DELAY
The “Start Delay” allows you to run the machine at
your convenience, for example at night when
electricity is cheaper.
• Press the “Start Delay” button. Using the “ ”
and “ ” keys, you can set the time on the display
to when you want the wash programme to start,
then confirm this with
• Press the
“Start/Pause”
“OK”
.
button. “Start at ...”
appears in the LCD display until the preset start time
is reached. The wash programme then starts
automatically .
• During the programme, the remaining time appears
in the LCD.
“Start Delay” correction
• If you have already confirmed the desired start time
“OK”
with
Pause”
or have already pressed
, they can still be changed. To do this, press
“Start/
the “Start Delay” button again.
The set time blinks and can be changed with the
“” and “” buttons. Then you only need to
confirm the changed time with
“OK”
again.
PROGRAMME START
After you have selected the programme and any
additional options, the indicator light above the
Pause”
button blinks. Turn on the tap and start the
programme by pressing the
“Start/Pause”
“Start/
button.
The indicator light above the button will now
illuminate.
The stage of the wash programme appears in the LCD,
as well as the time remaining until the end of the wash
programme.
DOOR LOCK
Within the first 15 minutes after the start of the
“Cotton” and “Easy Care” programmes the door can
be opened to add further laundry.
“You can add an item” will appear in the LCD as long as
this option exists. This is not possible if “Rapid Plus” is
selected.
PROGRAMME END
• The time remaining on the LCD shows 0:00, and
displays “END OF CYCLE”.
1. Turn the programme selector with the marking to
the top.
2. Close the water tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the same
programme section during which the current
programme was interrupted. Therefore do not add any
more detergent.
1. Press the
“Start/Pause”
button to interrupt the
programme.
The indicator light flashes.
2. Select the new programme (with temperature), any
additional options and - if you wish - another spin
speed. In this way you can also select an additional
option later, without changing the current
programme.
3. Press the
“Start/Pause”
button again to re-start
the programme.
• If you are in the “Prewash” programme step this
additional option can not be deselected as described
(to do this see “Cancel/Delete programme”)
CANCEL/DELETE PROGRAMME
1. Press the
“Start/Pause”
button to interrupt the
programme.
The indicator light flashes.
2. Press the “Reset” button.
“Do you want reset” appears in the LCD.
3. Confirm with the
“OK”
button to start draining the
water.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 05590/A
Black process 45.0° 100.0 LPI