Whirlpool AWO6325/1 INSTRUCTION FOR USE
GB
PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped
with automatic safety functions
which detect and diagnose faults
at an early stage and react
appropriately, e.g.:
B. “Service” indication
C. “
Water tap closed
” indication
D. “Clean pump” indication
Programme
Cotton
40 - 60 - 95°C
SuperEco
60 °C
Synthetics
30 - 40 - 60°C
Koch-Buntwäsche
40 - 60 - 95°C
60 °C
Pflegeleicht
30 - 40 - 60°C
Care
Labels
H
C
D
J
E
Max.
Load
kg
6.0
6.0
2.5
- respect the manufacturer's recommendations on the care label
Normally to heavily soiled bed linen, table linen and underwear, towels,
shirts etc. made of cotton and linen. With heavily soiled laundry the
additional “Prewash” option can be additionaly selected.
Normally to hevily soiled, robust bed linen, table linen and underwear,
towels, shirts etc. made of cotton and/or linen.
Offers highest economy in energy consumption by prolonged wash duration.
Ideal to be run overnight to additionally profit from the more favourable
energy rates. To avoid noise of spinning at night, set spin speed to “0” and
start spin programme in the morning, or define programme start with “Start
Delay” accordingly.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Type of wash / Notes
E. Programme selector
F. “Start/Pause” button
A
B
I
G. Spin speed selector
H. Programme sequence indicator
and Start delay indicators
I. “Reset” button
J. “Start delay” button
F
Detergents and Additives Special options Max
Pre-
Main
Wash
Yes
Yes
Yes
Softener
wash
–
G
Start
delay
Start-
vorwah
Pre-
wash
Vor-
wäsche
– –
Clean+
Clean+
Intensive
rinse
Intensiv-
spülen
Rinse
hold
Spül-
stopp
Variable
spin
Schleu-
dern
Spin
Speed
rpm
Max.
Max.
1000
1)
Delicates
30 - 40°C
Daily load
40°C
Quick wash
30°C
Wool
Cold - 40°C
Handwash
30 - 40°C
Rinse & Spin Spülen & Schleudern
Spin Schleudern
Drain Abpumpen
: option / Yes : dosing required
1)
For improved garment care spin speed is restricted in these programmes.
Feinwäsche
30 - 40°C
Mischwäsche
40°C
Schnelle Wäsche
30°C
Wolle
Kalt - 40°C
Handwäsche
30 - 40°C
–
–
– –
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
1.5
Shortly worn outer clothing made of cotton, polyester, polyamide and
3.0
blends with cotton.
Shortly worn outer clothing made of cotton, polyester, polyamide and
3.0
blends with cotton.
Only woollens with a felt-free finish, labelled with the woolmark and
1.0
identified as machine washable.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
1.0
Same as the last rinse and the final spin in the “Cotton” programme.
6.0
In this programme spinning is intensive. Same as the spin cycle in the
6.0
“Cotton” programme.
Drain only - no spinning.
Alternative method of terminating programme after “Rinse hold”.
Yes
–
Yes
–
Yes
–
Yes
–
Yes
– –
– – –
– – –
– –
– –
– – –
– – –
– – –
– –
– – – –
– – – – – –
Whirlpool is a registered trademark of Whirlpool USA.
1000
Max.
Max.
1000
400
Max.
Max.
5019 301 01152
1)
1)
1)
CONSUMPTION DATA
Temperature
Load
Water
Energy
Programme
(°C)
Cotton 95 6.0 59 * 1.90 2:00
Cotton ** 60 6.0 49 1.02 2:20
Cotton 40 6.0 54 0.65 2:00
SuperEco 60 6.0 51 0.72 4:00
Synthetics 60 2.5 50 * 0.70 1:30
Synthetics 40 2.5 45 0.55 1:15
Delicates 30 1.5 50 0.50
Daily load 40 3.0 45 0.45
Quick wash 30 3.0 40 0.40
Wool 40 1.0 55 0.50
Handwash 40 1.0 45 0.50
Handwash 30 1.0 45 0.40
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data
in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load
and the type of wash.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the
water out.
** Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives”
in your Instructions for Use.
Close the door and turn the programme selector
to the desired programme and temperature. The
indication lamp next to the “Start/Pause” button
blinks and the indication lamp of the predefined spin
speed lights up.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch
off automatically. Unsuitable combinations of options
are deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the “Prewash” option
.
“Clean+” button
• Choose this option if you use an in-wash additive
for stain removal (powder, for example “Vanish”)
- it will optimize the additive’s efficiency to get
better wash performance and stain removal.
(kg)
(l)
(kWh)
• Selectable for programmes “
“Synthetics”;
choose temperature of 30 or 40°C
and use with maximum load.
• Add an appropriate amount of in-wash additive for
stain removal (powder) to the main wash chamber,
together with your detergent (only use powder
detergent with this option).
Respect the manufacturer’s dosing instructions.
• Prolongs the programme by approx. 10 to 15
minutes.
• Appropriate for use of stain removers and
bleaches on oxygen basis.
Chlorine or perborate bleaches must not be
used!
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without pregressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain
only.
• If you select “Rinse hold” do not leave items to
soak for too long.
Approx. Programme
Duration
(hours : minutes)
0:45
1:00
0:30
0:45
0:40
0:36
Cotton” and
Note:
The programme stops to “Rinse hold” at
the time the “Rinse hold” lights in the preogramme
sequence indication is on. The indication lamp next
to the “Start/Pause”
button flashes.
Terminate the “Rinse hold” option:
• Press the “Start/Pause” button; the programme
will terminate automatically with the final spin
cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start/Pause”button.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
the rinse. The water is drained out only.
START DELAY
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent
when activating “Start delay” option.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the delay
time by 1, 3, 6, 9 or 12 hours.
• Press the “Start/Pause” button.
The indication over to the “Start Delay” button
lights up and goes off when the programme
starts.
• Once having pressed the “Start/Pause” button,
the countdown of the time delay begins. When
the programme starts, the start delay indicator
light goes off and is replaced by the programme
sequence indication.
• After the “Start/Pause” button has been
pressed, the number of hours preselected can be
reduced by pressing again the “Start Delay”
button.
To cancel the “Start Delay”
..before you press the “Start/Pause” button:
• Turn the programme selector to another position
or press the “Reset” button.
..after having pressed the “Start/Pause” button:
• Press the “Reset” button for at least 3 seconds the start delay indicator light goes out.
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause”
button lights up. The programme sequence indicator
shows the current programme phase, running from
left to right through Wash, Rinse, Spin/Drain.
When the programme phase is finished, the
corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show the the door can be opened.
As long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel (Reset)
a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for
Use”; if the fault persists, contact our After Sales
Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap: if the indications still lights
up, refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned:
in the latter case refer to the Instructions for Use
(“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the “Start/Pause”
button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before
the end.
• Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the door
can be opened.
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01152
Loading...