Whirlpool AWO 12967 PROGRAM CHART

Download

Page 1

30105758aGB.fm Page 1 Wednesday, September 28, 2005 4:38 PM

GB AWO 12967 PROGRAMME CHART

A. Programme selector knob and

“Start/Pause” button

intelligent technology

Sense

always guarantees perfect results with maximum efficiency whatever the wash load.

F E

LC-Display B. “Menu” button ( )

C. “Back” button D. “Info” button E. “Up” ( ) and “Down” ( ) buttons

to set temperature and spin speed F. “OK” button for confirmation G. “Reset” button H. “Start Delay” button

Programme

Cotton

Synthetics

Daily Load 60 min

Quick wash 30 min

Delicates

Wool

Handwash

Antibacterial 80°C

(selectable by

“Favourite”)

Lingerie 30°C (selectable by

“Favourite”)

Sport 40°C

(selectable by

“Favourite”)

Jeans 40°C

(selectable by

“Favourite”) Rinse & Spin

Spin

Short Spin

Drain

For improved garment care spin speed is restricted to 1000 rpm in this programme.

For improved garment care spin speed is restricted to 400 rpm in this programme.

Care

Labels

Normally to heavily soiled bed linen, table linen and underwear , towels, shirts etc. made of cotton or linen.

Normally soiled blouses, shirts and other outer clothing made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of these fibres with cotton.

Normally to lightly soiled textiles made of cotton and/or easy care fibres.

Lightly soiled outer and sport clothing made of cotton, polyester, polyamid and mixed cotton fabrics.

Curtains and delicate dresses, skirts, shirts and blouses. Only woollens with a felt-free finish, labelled with the

woolmark and stated as machine washable. Whirlpool wool machine washable programme is officially certified and endorsed by the Woolmark Institute.

Textiles made of linen, silk, wool or viscose marked as “handwashable”. Whirlpool wool handwashable programme (40°C) is officially certified and endorsed by the Woolmark Institute.

Normally to heavily soiled bed linen, table linen and underwear , towels, shirts etc. made of cotton and linen.

This programme eliminates allergens and bacteria, ensuring perfect sanitization of your laundry. the bacteria removal efficiency has been tested based on the NF EN 13697 standard of Nov. 2001.

This is the perfect programme for even most delicate lingerie (use of a laundry net strongly recommended).

Normally soiled and sweaty sportswear made of cotton jersey and microfibres.

Normally soiled cotton jeanswear and garments made of jeanslike material such as trousers and jackets.

––

Programme to spin cotton or linen laundry intensively with

–

maximum spin speed. Programme to spin delicate laundry gently with a restricted spin

–

speed. Drain only - no spinning. Alternative method of terminating a

–

programme after “Rinse Hold”.

Type of wash/

Degree of soiling

Detergent

Max.

load

Kg h °C rpm

6.0

2.5

3.0

1.5

1.0

6.0

1.0

2.5

6.0

1.5

and Additives

Main

Pre-

Softener

❉

❉ ❉ ❉ ❉ ❉

❉

❉ ❉

wash

Yes

Yes Yes

Yes

––

Start

wash

Delay

❉❉❉ ❉ ❉ ❉ ❉❉

❉❉❉ ❉ ❉

– –

❉❉❉

– –

–

–––❉––– –––❉–––

Selectable special options =

Pre-

Intensive

wash

❉

–

❉

––

❉

––

❉

––

❉

––––––

❉

––––––

❉

––––––

❉

––––––

❉

–

Rinse

Hold

Reduction

❉❉❉❉

❉❉ ❉

–

❉

❉❉❉

Speed

❉

Easy Iron

❉❉

–– –– ––

––

Tempe-

Extra

care

20 to 95 1600

20 to 60 1000

30 to 60 1600

–

20 to 60 1600

20 to 40 1000

20 to 40 400

rature

–– –– –

–– –

Max.

Spin

Speed

80 1600

30 400

40 1000

40 1600 20 1600

1600

1000

––––❉––––––– –

- tested and approved by The Woolmark Company -

M 0501

Notes

“Prewash” can be additionally selected for heavily soiled laundry at any temperature.

“Prewash” can be additionally selected for heavily

soiled laundry.

– –

If you select “Rinse Hold” do not leave items to soak for

too long.

If you select “Rinse Hold” do not leave items to soak for

too long. A very gentle spin is used in this programme.

Preset programmes which cannot be varied concerning temperature, spin speed and options.

Same as the spin cycle in the “Cotton” programme. Same as the spin cycle in the “Cotton” programme.

Same as the spin cycle in the “Wool” programme. All running programmes can be cancelled by starting

“Drain”.

–

Whirlpool is a registered trademark of Whirlpool USA

5019 301 05758/A

Black process 45.0° 100.0 LPI

Page 2

30105758aGB.fm Page 2 Wednesday, September 28, 2005 4:38 PM

CONSUMPTION DA TA

Programme Temperature

Cotton Cotton

Cotton with “Extra care” ****

Cotton Easy Care Easy Care Daily Load

Quick wash

Delicate

Wool

Handwash

*Consumption ** The

conditions and adapt the programme run time accordingly.

*** To reduce

drains the water out.

**** Reference Programme for Energy Label

values

programme duration

the water temperature, some cold water is

Size of wash

(°C)

95 6.0 49*** 1.90 2:00 60 6.0 44 1.14 2:20 60 6.0 44 1.02 2:30 40 5.0 42 0.70 2:00 60 2.5 55*** 0.70 1:30 40 2.5 50 0.50 1:15 40 3.0 43 0.55 1:00 30 3.0 37 0.40 0:30 30 1.5 60 0.50 0:45 40 1.0 60 0.50 0:40 30 1.0 45 0.40 0:35

were measured in normal conditions in compliance with Standard IEC/EN 60456.

may vary from the chart values. The washing machine will allow for individual household

POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROGRAMME

Add the detergent as described in the chapter “Detergent and Additives” in the booklet.

1. Turn the to the desired programme. This appears in the display, together with spin speed, wash temperature and wash programme duration (in hours and minutes). The indicator light on the

Pause”

2. Temperature and spin speed can be changed using the

“menu”

3. The additional options available for the wash programme can be selected with the

programme selector knob

button will blink.

button as well as the

“”

in any direction

and

“”

“menu”

“Start/

buttons.

button.

PRESS THE DESIRED SPECIAL OPTION BUTTON

“Spin Speed”

• A maximum spin speed is assigned to each programme.

• Press the appears in the display. The set spin speed blinks and can be changed with the

• If the spin speed “0” is selected, the final spin is cancelled. The water is drained out only.

button until “To set Spin Speed”

“menu”

and

“”

buttons.

“”

Water

(kg)

added at the end of the main wash cycle, before the pump

Energy

(l)

(kWh)

Programme duration **

approx.

(hours : minutes)

“Prewash”

• Only for heavily soiled laundry (for example. sand or granular dirt). Programme duration is increased by some 15 min.

“Intensive rinse”

• An additional rinse cycle is carried out.

• This additional option is particularly suitable for areas with very soft water, for washing baby linen and helping people with detergent allergies.

“Rinse hold”

• The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional creasing are prevented.

• This option is particularly recommended for the programme “Easy Care” or “Delicates”.

• This additional function is particularly useful if you want to postpone spinning to a later time.

The programme has reached “Rinse hold” when

Note:

the corresponding symbol blinks in the display.

Terminate the “Rinse Hold” option:

•Press the terminate automatically with the appropriate spin cycle for the current programme.

• If you do not wish to spin the clothes, turn the programme selector knob to “Drain” and press the “

“Start/Pause”

Start/Pause

” button.

button; the programme will

“Extra care”

• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption can be achieved.

“Easy Iron”

• To lessen creasing, the water quantity is increased and the clothes are spun very gently at reduced power. This makes your laundry significantly damper at the end of the programme.

STORE INDIVIDUAL PROGRAMMES (“Favourite”)

• Turn the programme selector to “Favourite”.

• Select one of the 6 vacant storage spaces from 5 to 10 using the

• A list of all the available wash programmes appears in the display. Select the desired programme with and

• You can then, as already described, select additional options for the wash programme and set temperature and spin speed as desired.

• When all the settings have been made and confirmed with storage space and can be reselected at any time and run using

“”

and confirm with

“”

“OK”

“Start/Pause”

button and confirm with

“”

“OK”

, the programme is stored in the selected

“OK”

“”

START DELAY

The “Start Delay” allows you to run the machine at your convenience, for example at night when electricity is cheaper.

• Press the “Start Delay” button. Using the

keys, you can set the time on the display to

“”

when you want the wash programme to start, then confirm this with

•Press the in the display until the preset start time is reached. The wash programme then starts automatically.

• During the programme, the remaining time appears in the display.

“Start/Pause”

“OK”

button. “Start at ...” appears

and

“”

“Start Delay” correction

• If you have already confirmed the desired start time with they can still be changed. To do this, press the “Start Delay” button again. The set time blinks and can be changed with the and changed time with

or have already pressed

“OK”

buttons. Then you only need to confirm the

“”

again.

“OK”

“Start/Pause”

“”

PROGRAMME START

After you have selected the programme and any additional options, the tap and start the programme by pressing the

Pause”

The stage of the wash programme appears in the display, as well as the time remaining until the end of the wash programme.

“Start/Pause”

button.

symbol blinks. Turn on the

“Start/

DOOR LOCK

Within the first 15 minutes after the start of the “Cotton” and “Easy Care” programmes the door can be opened to add further laundry. “You can add an item” will appear in the display as long as this option exists. This is not possible if “Rapid Plus” is selected.

PROGRAMME END

• The time remaining on the display shows 0:00, and displays “END OF CYCLE”.

1. Turn the programme selector with the marking to the top.

2. Close the water tap.

3. Open the door and unloa d the machine.

RESELECT AFTER PROGRAMME START

A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent.

1. Press the programme. The

2. Select the new programme (with temperature), any additional options and - if you wish - another spin speed. In this way you can also select an additional option later, without changing the current programme.

3. Press the programme.

• If you are in the “Prewash” programme step this additional option can not be deselected as described (to do this see “Cancel/Delete programme”)

“Start/Pause”

button to interrupt the

symbol blinks.

button again to re-start the

CANCEL/DELETE PROGRAMME

1. Press the programme. The

2. Press the “Reset” button. “Do you want reset” appears in the display.

3. Confirm with the

“Start/Pause”

button to interrupt the

symbol blinks.

button to start draining the water.

“OK”

Whirlpool is a registered trademark of Whirlpool USA

5019 301 05758/A

Black process 45.0° 100.0 LPI

Page 3

Whirlpool is a registered trademark of Whirlpool USA

4FU$IJMETBGFUZ

QRG 30105758aGB.fm Page 1 Wednesday, September 28, 2005 4:39 PM

Brief instructions for washing machines with LCD display

First use

Please always follow the installation instructions enclosed with the appliance.

Turn the programme selector knob with the marking to highlight

“Settings”

Select the language and time by pressing

 UPDPOGJSN

4FUMBOHVBHF

4FUDMPDL 4FUDPOUSBTU

“Up/Down”

Down

Please follow

the instructions

on the LCD display

Set language

&OHMJTI

*UBMJBOP %FVUTDI

 UPDPOGJSN

&OHMJTIDPOGJSNFE

Set time

 UPDPOGJSN

4FUMBOHVBHF

4FUDMPDL

4FUDPOUSBTU

Set Child safety

Turn the programme selector knob to

Select

“Set Child safety”

4FU#SJHIUOFTT 4FU#V[[FS

With the child safety activated, you can select a wash programme and run it, but you cannot change or cancel it while it is running.

If you want to cancel or change a running programme, you can temporarily release the child safety by pressing simultaneously.

and confirm with

5PDPOGJSN

“Settings”

and

“OK”

Confirm your selection by pressing change the language or time; confirm the language and time with

“OK”

If you have accidentally made an incorrect choice of

...you can reset as follows:

- turn the programme selector knob to

- press the

- turn the selector switch marking to the top and then back to Settings.

The desired language can now be selected.

Black process 45.0° 100.0 LPI

“Reset”

language...

button;

“OK”

; press

“Up/Down”

“Settings”

In the same way, you can adjust contrast and brightness as well as switching the buzzer and child safety on and off.

;

Please refer to the installation instructions enclosed in the appliance.

5PTFUUJNF

5PDPOGJSN



Important Note

"55&/5*0/

EJEZPVSFNPWF

USBOTQPSUCSBDFT

5PDPOGJSN

You can then select or run a new programme. While this programme is running, the child safety device is re-activated in order to prevent accidental programme changes.

For fault messages, please read through the enclosed “Instructions for Use” (“Troubleshooting Guide”).

To deactivate Child safety:

- turn the programme selector knob to

- select

-on the LCD display

“Set Child safety”

selection by pressing child safety by pressing

by pressing

;

“OK”

is flashing - confirm deactivation of

“Off”

“OK”

“Settings”

“Up/Down”

;

, confirm

Your washing machine is ready to use

5019 301 05758/A

Page 4

Whirlpool is a registered trademark of Whirlpool USA

.FNQUZ

$PUUPO

.$PUUPO

QRG 30105758aGB.fm Page 2 Wednesday, September 28, 2005 4:39 PM

Select and start

wash programme

Turn the programme selector knob with the marking to highlight the desired programme.

&BTZDBSF 1VTI PS

 xD

It will appear on LCD display with the preset speed and temperature. You can now start the wash programme, or change the temperature and spin speed and, if required, select additional options.

Press the “Menu” button to select additional functions (please follow the instructions on the LCD display). The additional options you can choose are displayed as symbols on the LCD display:

Pre-

Wash

Intensive

Rinse

Hold

Eco

Easy Iron

Button functions

Press the

Activate or deactivate additional options and set the spin speed and/or temperature with the

Confirm with

Press the

“Menu”

“Back”

“Info”

button to call up the next screen.

“Up/Down”

“OK”

button to return to the previous screen.

button to obtain additional information

arrow buttons.

Storing frequently used wash

programmes

Turn the programme selector knob to

5PTFMFDU

14QPSU 1+FBOT

With the arrow buttons, select a free storage location (from M5 to M10) and confirm with

&BTZDBSF %BJMZMPBE

Select the required programme from the list of wash programmes displayed and confirm with change the wash temperature and spin speed and select additional options as desired.

14QPSU 1+FBOT

Confirm with The wash programme will then be stored in the selected storage location and can be selected again at any time.

at the end of the displayed selection.

“OK”

5PTFMFDU

“OK”

5PTFMFDU

“Favourites”

. As already described, you can

As soon as you have selected the desired additional options, you can start the wash programme, by pressing the flashing Start symbol on the programme selector knob. For that, you must not go to the end of the selection displayed on the LCD display.

 xD

Black process 45.0° 100.0 LPI

End of cycle

&/%0'$:$-&

Press the

- to cancel a running wash program;

- to cancel changes to a selected programme (e.g. change of

- to cancel a wash programme stored under

“Reset”

temperature, selected options) before the programme has been started;

button:

“Favourites”

Cancelling stored wash programmes

- Turn the programme selector knob to

- With the arrow buttons, select the stored wash programme to be cancelled;

- Press the

seconds, until question.

The programmes on storage locations P1 to P4 are preset and cannot be cancelled or modified.

“Reset”

button and hold the button down for a few

“Empty”

appears next to the storage location in

“Favourites”

;

5019 301 05758/A

Whirlpool AWO 12967 PROGRAM CHART

Specifications and Main Features

Frequently Asked Questions

User Manual