Whirlpool AWM 9200 WH INSTRUCTION FOR USE

GB AWM 9110 BS PROGRAMME CHART

5019 301 15281

Whirlpool is a registered trademark of Whirlpool USA

The wool cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark
garments labelled as “machine wash” provided that the garments are washed according to the instructions on the garment
label and those issued in this programme chart. M0805

1)

For improved garment care, spin speed is restricted in these programmes.

2)

In this column are indicated the most suitable care labels, but not all which are

possible to be treated with the programmes.

Programme

Care

labels

2)

Type of wash/Notes

- Respect the manufacturer’s recommendations on the care label.

Max.
Load

kg

Detergent and additives Special Options and Modifiers Max.

Spin

Speed

rpm

Tempe-

rature

°C

Pre-

wash

Main
wash

Softener Start

delay

Rapid Easy

ironing

Rinse

hold

SkinCare Intensive

rinse

Pre-

wash

Clean + Soiled

Heavy

soil

Sanitary /

(Antibacterial)

Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
If you select “Max” temperature, this programme eliminates bacteria, ensuring sanitization of
your laundry.

10.0

❉

Yes

❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉

1000 max.

Heavy duty

Slightly to normally soiled bed linen, table linen, shirts, trousers etc. made of cotton and linen.

10.0

❉

Yes

❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉

1000 20 to 60

Synthetics

Slightly to normally soiled blouses, shirts etc. made of polyester (Diolen, Trevira), polyamide
(Perlon, Nylon) or blends with cotton.

5.0

❉

Yes

❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉

1000 20 to 60

Kids wear

Normally soiled kids garments made of cotton.

For heavily soiled clothes, select “Prewash” option.

5.0

❉

Yes

❉ ❉ — — ❉ ❉ ❉ ❉ ❉ ❉

1000 20 to 60

Daily

Programme for slightly to normally soiled fabrics made of cotton and/or synthetic fibres.

5.0

—

Yes

❉ ❉ — ❉ ❉ ❉ ❉ — ❉ —

1000 20 to 60

Express

Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.

5.0

—

Yes

❉ ❉ — — — ❉ ❉ — ❉ —

1000 20 to 30

Sport

Normally soiled and sweaty sportswear made of cotton jersey or microfibres.
This programme includes a prewash cycle - you can add detergent also to the prewash
chamber. Do not add any softener.

4.0

❉

Yes

— ❉ — — ❉ ❉ ❉ ❉ — —

1000 20 to 60

Big items

Blankets made of synthetic fibres, bedcovers filled with polyester or other artificial fibres,
sleeping bags, bathmats and similar items.

4.0

❉

Yes

❉ ❉ — — ❉ ❉ ❉ ❉ — ❉

1000 20 to 95

Delicates

Curtains and delicate dresses, skirts, shirts and blouses.

4.0

❉

Yes

❉ ❉ — ❉ ❉ ❉ ❉ ❉ ❉ —

800

1)

20 to 40

Wool

Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for machine
washable wool.

3.0

—

Yes

❉ ❉ — — ❉ ❉ ❉ — — —

1000 20 to 40

Handwash

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

A very gentle spin is used in this programme.

3.0

—

Yes

❉ ❉ — — ❉ ❉ ❉ — — —

800

1)

20 to 30

Whitest whites

White and robust cotton laundry. With an additional rinse to avoid residues, this programme is
ideal to be used with stain removers on oxygen basis; select “Clean +” option in this case.

10.0

—

Yes

❉ ❉ — ❉ ❉ ❉ ❉ ❉ ❉ ❉

1000 20 to 60

Gentle Spin

—

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

10.0

— — — ❉ — — — — — — — —

800

1)

—

Rinse & Spin

—

Same as the last rinse and the final spin in the “Heavy duty” programme.

10.0

— — ❉ ❉ — — — ❉ ❉ — — —

1000

—

Drain & Spin

—

Use this programme to drain your washer or to drain and spin your wash load.

Delicate fabrics, handwashables and woollens should be drained with no spin or low spin speed to
avoid fabric stress.

10.0

— — — ❉ — — — — — — — —

1000

—

A A

1000

10

Kg

energy wash rpm

1000

800

0

400

600

AWM 91 10 BS

Made in Germ any

Semi - Professional

A. “On/Off” button
B. Programme selector
C. “Start (Pause)” button
D. Option buttons
E. Modifiers
F. “Start delay” button
G. “Favourites” button
H. “Reset (Drain)” button

I. Programme sequence indicator

Selecting any option the indication lights up. When
the combination of programme, additional options/
modifiers and temperature is not possible, the
indication lights switch off automatically and a
signal sounds.

❉ : optional / Yes: dosing required.

F

C

G

B

A

H

D

}

E

}

I

GB AWM 9110 BS, AWM 9200 WH

Whirlpool is a registered trademark of Whirlpool USA

5019 301 15281

Add the detergent as described in the programme table and in the

chapter “Detergent and Additives” in your Instructions for Use.

1. Press “On/Off” to switch on the washer. The light of the

selected programme is on, and the “Start (Pause)” button

blinks.

2. Turn the programme selector to the desired programme -

it is marked by a light.

3. The predefined temperature and spin speed can be altered

by pressing the “Temperature” and the “Spin speed”

modifier.

Selecting any option or modifier, the indication lights up. If

the combination of programme, options or modifiers is not

possible, the indication lights switch off automatically and a

signal sounds.

“Rapid” button

• Enables quicker washing by shortening the programme

duration.

• Recommendable for lightly soiled laundry.

“Easy ironing” button

• Reduces creasing by increased water quantity and a very gentle

spin.

“Rinse hold” button

• The laundry remains in the last rinse water without being spun:

this prevents creasing and colours from changing.

• Particularly useful if you want to postpone spinning to a later

time, or if you want to drain only.

• Do not leave the laundry to soak in the rinse hold for too long.

Note: The programme starts to “Rinse hold” when the “Rinse hold”

button light blinks; the “Start (Pause)” button light also blinks.

Terminate the “Rinse hold” option :

• Press the “Rinse hold” or the “Start (Pause)” button ; the

programme will terminate automatically with the final spin

cycle for the present wash programme.

• If you do not wish to spin the clothes, press and hold the

“Reset (Drain)” button for a few seconds. The water

is drained out then, before the door can be opened.

“Spin speed” modifier

• Every programme has an automatic predefined spin speed.

• Press the button to set another spin speed.

• If you select spin speed “0”, the final spinning is cancelled and

the water is drained out only at the end of the programme.

“Rinse” modifier

• “SkinCare” : maximum amount of rinse water is added,

and rinse cycle is prolonged.

• “Intensive rinse” : more rinse water is added, and rinse

cycle is prolonged.

• Particularly suitable for areas with very soft water, for baby

clothes or to help people with skin allergies.

“Options” modifier

Prewash :

• Adds a prewash cycle to the programme selected.

• Use only for heavily soiled loads (e.g. sand, granular dirt).

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy for

cold fill

(kWh)

Energy for

hot fill*

(kWh)

Approximate programme

duration with cold fill

(hours : minutes)

Approximate

programme duration

with hot fill

(hours : minutes)*

without Rapid with Rapid

Sanitary 60 10.0 76 1.34

0.73 4:00 1:55 4:00

Sanitary 60 5.0 51 1.08

0.59 3:45 ** 3:45

Sanitary 40 5.0 51 0.75

0.45 3:40 ** 3:40

Heavy duty 40 10.0 96 1.04

0.25 2:10 1:55 1:25

Heavy duty 40 3.0 40 0.50

0.20 1:15 ** 1:10

Heavy duty 40 1.0 30 0.36

0.19 0:55 ** 0:50

Normal casual 40 5.0 61 0.75

0.35 1:45 1:30 1:45

Normal casual 40 3.0 55 0.65

0.32 1:45 ** 1:35

Daily 40 5.0 50 0.70

0.25 1:00 - 1:00

Express 30 5.0 40 0.35

0.09 0:30 - 0:30

Delicates 30 4.0 86 0.45

0.45 0:55 - 0:55

Wool 40 3.0 68 0.70

0.70 0:45 - 0:45

Handwash 30 3.0 97 0.45

0.45 0:40 - 0:40

Big items 40 4.0 80 0.60

0.34 1:20 - 1:20

Whitest whites 60 10.0 98 1.35

0.75 2:15 - 2:10

Kids wear 40 5.0 75 0.64

0.25 1:45 - 1:30

Sport 30 4.0 52 0.47

0.17 1:30 - 1:30

The remaining programme time can deviate from the values in the table as it depends on the size of your wash load, water inlet temperature etc.;

the remaining time indication is newly calculated and updated if necessary approximately 20 minutes after programme start.

*

The grey shaded columns show energy consumptions and programme durations for the washing machine being connected to both hot and cold fill,
with a hot fill inlet temperature of 60°C. The columns left from them show energy consumptions and programme durations for the washing machine
being connected to cold water only by the Y-adapter.

**

Automatic adaptation of programme duration after detection of wash load.

ADD DETERGENT, CLOSE THE DOOR AND
SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION OR MODIFIER

➡

• Increases the cycle time by approx. 25 minutes.

• Do not use liquid detergent for the main wash when selecting

“Prewash”.

Clean +

• Choose this option if you use an in-wash additive for stain
removal (powder, for example Vanish).

• Optimizes the additive’s efficiency to get better wash

performance and stain removal.

• Select temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for stain
removal (powder) to the prewash chamber.

• Appropriate for use of stain removers and bleaches on oxygen

basis. Chlorine or perborate bleaches must not be used!

Normal

“Soil level” modifier

• Adapts the programme duration to the soil level of your laundry.

= Normal / = Soiled / = Heavy soil

If there is a programme setting which you use frequently, the

washing machine offers the possibility to save one setting for each
programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and

options/modifiers.

Press and hold the “Favourites” button for some seconds; the

light goes on and a signal sounds when the programme setting is
saved.
Next time you want to use your individual programme setting, turn

the programme selector to the desired programme, shortly push
the “Favourites” button and start by pressing “Start
(Pause)” .

If you want to replace the saved setting by another one:

• Select the programme desired and the new temperature, spin,

options/modifier setting.

• Press and hold the “Favourites” button for at least 3
seconds; the previously saved setting is replaced by the new one.

The “Start delay” allows to run the machine at the consumer’s

convenience, for example at night when electricity is cheaper.

• Select programme, temperature and options/modifiers as

desired.

• Press the “Start delay” button to select the delay time by 1 to
24 hours.

• Press and hold the “Start (Pause)” button ; the

countdown of the delay time begins. The light of the “Start
delay” button will keep blinking until the programme starts.

• The time delay indication disappears when the programme
starts and it is replaced by the remaining time.

To cancel the “Start delay”:

• Press “Reset (Drain)” for at least 3 seconds, or set the
delay time to “0:0” - the delay time will disappear from the

display after a few seconds.

Turn on the tap and press and hold the “Start (Pause)” button

- the button’s light stops blinking and goes on; it will take some time

until water enters into the washing machine.

The programme sequence indicator on the display shows the
sequence reached in the programme. After starting the

programme, the indication runs from left to right through “Add
garment”, prewash, wash, rinse, spin. When a programme
sequence is finished, the corresponding symbol goes off.
The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining

time is newly calculated in certain programme phases. If this is the
case, an animation appears on the display and the and the “6

th

Sense” symbol lights up.

As soon as a programme starts, the “Door locked” symbol lights
up on the display.
You can interrupt the programme by pressing “Start (Pause)”

- the light blinks. The “Door locked” symbol on the display goes
off and you can open the door. In certain programme phases, the
“Door locked” symbol remains lit to show that the door cannot

be opened in the present programme phase, e.g. when the water
level is too high or during spinning.
As long as the “Add garment” symbol lights up on the display,
you can add more washing: press “Start (Pause)” , open the
door, add your washing, close the door and press “Start (Pause)”

to continue the programme.

“End” appears on the display, and a signal sounds.

1. Switch the machine off by pressing “On/Off” .

2. Turn off the tap and open the door to unload your washing. Leave

the door open for some time so that the washer’s inside can dry.

1. Press the “Start (Pause)” button to interrupt the
programme. The light blinks.

2. Select the new programme, temperature and options/

modifiers as desired.

3. Press the “Start (Pause)” button again. The new
programme continues at the same position where the

previous programme was interrupted. Do not add detergent
for this programme.

Press and hold the “Reset (Drain)” button for a few

seconds; the light blinks. It will take some time until any existing
water is drained out and the door can be opened (up to 10
minutes). Caution, the washing could still be hot!

SAVE YOUR FAVOURITE PROGRAMMES

START DELAY

➡

➡

PROGRAMME START

ADD WASHING/DOOR LOCK

PROGRAMME END

CHANGE THE PROGRAMME, TEMPERATURE,
OPTIONS AFTER PROGRAMME START

RESET A RUNNING PROGRAMME BEFORE
THE END

IF THE WASHING MACHINE APPEARS TO BE DAMAGED, CONTACT THE MACHINE OWNER AND, IF NECESSARY, THE AFTER-SALES SERVICE.