Whirlpool AWM 9150 PROGRAM CHART

30115131GB.fm Page 1 Thursday, November 4, 2004 4:58 PM

AU 6AWM 9150 PROGRAMME CHART

A. Programme Sequence Indicator B. Wash Cycles C. “Start” Button D. “Start Delay” button E. Options F. “Water Temperature” Modifier G. “Spin Speed” Modifier H. “End of Cycle Signal” Modifier I. “Pause/Cancel” Button J. “Soil Level” Modifier

Programme

Hygiene Plus

White Cotton

Stain Cycle

Normal Cotton

Care

labels

For heavily soiled colourfast cotton which needs sanitization.

For white cotton loads which you would like to bleach. An additional rinse provides optimal rinse performance to avoid chlorine residues on your laundry.

For normally soiled, sturdy and colourfast cotton. Use Stain Treat option for optimal removal of organic stains like blood, egg yolk etc.

For cotton loads such as shirts, permanent press blends and linen items.

Type of wa s h / N o t e s

A D

Max. Load

10.0

Detergents and additives Special Options Spin

Softener Bleach Main

❉❉

Wash

Yes

Prewash Start

Delay

Pre-

wash

Stain Treat

When you select an option an indicator lights up. If an option is not recommended for the selected programme the indicator light will not light and a warning sound advises that this option is not possible. If an option is selected after the programme has started a sound will indicate that it is not possible to select it at this stage.

: optional / yes: dosing required.

❉

Auto Soak

2nd

Rinse

Extended

Spin

❉❉❉❉ ❉❉❉

Speed

extra

high

extra

high

extra

high

Temperat u r e

°C

max

extra hot/cold

hot/cold

Rapid Wash

Everyday Wear

Silk

Delicate/Wool

Doona / Duvet For handwashable and special-care garments.

Rinse / Spin — For a rinse and an extra high speed spin. If you wish you can reduce the speed.

Drain / Spin —

Black process 45.0° 100.0 LPI

For slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.

For no-iron fabrics such as sport shirts, permanent press blends, cotton and linens.

For washable silk. Check care label instructions to make sure that garment is identified as machine washable.

For curtains, delicate dresses, skirts, shirts and blouses. For washable wool. Check care label instructions to make sure that garment is identified as machine washable.

For draining the washer with an additional extra high speed spin. If you wish you can reduce the speed.

2.0

5.0

2.0

2.5

2.0

10.0

❉❉

❉❉ ❉

❉

——

—Yes

—

Yes

——

—

❉❉❉

—

——

❉

—

———

❉

———

❉

———

❉

———

❉

————

❉

❉❉❉

❉❉

❉

❉❉

Whirlpool is a registered trademark of Whirlpool USA

extra

high

—low

— no spin

—low

extra

—

❉

low

extra

high

extra

high

hot/cold

warm/warm

5019 301 15131

—

30115131GB.fm Page 2 Thursday, November 4, 2004 4:58 PM

CONSUMPTION DATA

Programme Tempera t u r e

Load

(kg)

Water

(l)

Approximate programme

duration*

(hours :minutes)

Hygiene Plus extra hot/cold 10.0 100 1:50

White Cotton hot/cold 10.0 100 1:20

Stain Cycle hot/cold 10.0 100 2:10

Normal Cotton ** warm/cold 10.0 100 2:10

Rapid Wash warm/cold 2.0 48 0:35

Everyday Wear warm/cold 5.0 75 0:55

Silk cold/cold 2.0 75 0:30

Delicate/Wool cold/cold 2.5 75 0:35

Doona / Duvet cold/cold 2.0 75 0:35

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table dependent on the water supply pressure and temperature, the load and the type of wash. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the household conditions

applicable at that time. The Hygiene Plus cycle complies to the UK Care Standard Act 2000 (CSA) Standard 26, therefore rest time indication might vary if hot water supply is below 60°C.

** When tested to 5/N25 2040 2:2000.

ADD DETERGENT, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the programme table or in the chapter “Detergent and Additives” of the instructions for use.

1. Press the desired wash cycle.

2. The remaining time display shows the duration of the chosen programme (in hours and minutes) and the pilot lamp of the wash cycle button lights up.

3. The programme sequence, the predefined spin speed, water temperature, End of Cycle signal and options indicators corresponding to the selected programme light up. The recommendations can be altered by pressing the modifier and the options buttons.

SELECT ANY DESIRED OPTION AND MODIFIER

Selecting any option the indication lights up. When the combination of programme, additional options and modifiers is not possible, the indication lights switch off automatically and a signal sounds.

“Prewash”

• For heavily soiled laundry.

• The cycle time increases approx. 15 minutes.

• Add detergent to the Prewash and Main Wash

dispenser compartments.

• When using the Prewash compartment, do not use

liquid detergent in the Main Wash compartment: use powder detergent for the main wash cycle.

• “Prewash” and “Auto Soak” options cannot be selected in the same cycle.

“Stain Treat”

• For heavily soiled laundry.

• Warm water fill for optimal organic soil removal and heat to high temperature.

“Auto Soak”

• For heavily soiled laundry with set-in stains.

• The cycle time increases approx. 30 minutes.

• Use with a wash cycle: Select the desired wash cycle and “Auto Soak” option, add detergent to the Prewash and the Main Wash dispenser compartments; press the “Start” button. When using the Prewash compartment, do not use liquid detergent in the Main Wash compartment: use powder detergent for the main wash cycle.

• Use without a wash cycle: Select first “Drain/Spin” or “Rinse/Spin” and then “Auto Soak” option; choose the desired soak temperature, add detergent to the Prewash compartment and press the “Start” button.

• “Prewash” and “Auto Soak” options cannot be selected in the same cycle.

“2nd Rinse”

• This option is recommended to ensure the removal of detergent or bleach residues from garments.

• It provides an additional rinse with the same water temperature as the first rinse.

• This option is particularly suitable for areas with very soft water, for baby clothes and to help people with allergies.

“Extended Spin”

• This option is useful for adding an additional spin to any cycle to improve the “fluff” of your laundry, to reduce drying time and to save energy

“Modifiers”

Preset cycle settings of water temperature (wash temperature/ rinse temperature), spin speed (no spin to extra high), End of Cycle signal (off, low or high) and soil level (light, normal, heavy) can be changed. You can modify the settings by pressing the respective buttons. Changing the soil level leads to different programme durations

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity may be cheaper.

• Select programme, modifier and options.

• P ress the “Start Delay” button to select the delay time by 1 to 10 hours;

• Press the

“Start”

button.

•The time delay indication disappears when the programme starts and it is replaced by the remaining time.

• The number of hours preselected can later be reduced pressing again the “Start Delay” button.

To cancel the “Start Delay”.

• Press the “Pause/Cancel” button once.

• Press the “Start Delay” button up to 00 h in the display.

•

Check the programme setting and press and hold

“Start”

the

button.

PROGRAMME START

Turn on the taps and press the

“Start”

button. The indicator lamps show the sequence reached in the programme. After starting the programme, the sequence indication runs from top to bottom through “Add a Garment”, “Soak/Prewash”, “Wash”, “Rinse”, “Spin” and “End of Cycle”. When a sequence of the programme is finished the corresponding lamp goes out.

ADD A GARMENT

After programme start and while the “Add a garment” lamp is on you can still add a garment. Press “Pause/Cancel” button once. After few seconds the door will be unlocked and you can add the item. Close the door and press the “Start” button again. The programme will run again from the point where it was interrupted.

DOOR LOCK

After each programme start the door is locked and approx. 0.5 l of water is rinsed in. The door is unlocked for a few seconds. The door is then locked until the end of the programme. Detailed information can be found in the instructions for use.

PROGRAMME END

• The time remaining is “0:00” and the “End of Cycle”– light is on.

1. Take out the load.

Turn the tap off and leave the door ajar to allow the drum to dry out. The control panel is switched off 5 minutes after the end of the cycle, it is still possible to open the door.

CHANGE THE PROGRAMME, TEMPERATURE, OPTIONS AFTER PROGRAMME START

1. Press the “Pause/Cancel” button once to

interrupt the programme. The light flashes.

2. Select the new programme with temperature,

any options and modifier if you want.

Press the

“Start”

button. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL A PROGRAMME BEFORE THE END

Press the “Pause/Cancel” button twice. Any existing water is drained out before the door can be opened.

LOCKING CONTROLS

The “Controls Locked” prevents unintended use of the washer. You can also use the “Controls Locked” feature to prevent unintended cycle or option changes during a cycle. When “Controls Locked” is lit, all buttons are disabled. Y ou can lock the washer while it is operating.

To lock the controls: Select and hold “Drain/Spin” button for 3 seconds. The “Controls Locked” status indicator lights up.

To unlock the controls: Select and hold “Drain/Spin” button for 3 seconds until

the “Controls Locked” status indicator is switched off.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 15131

Black process 45.0° 100.0 LPI

+ 1 hidden pages