Whirlpool AWM 8050 PROGRAM CHART

3GB15108.fm Page 1 Monday, July 19, 2004 12:14 PM

GB AWM 8050 PROGRAMME CHART

A. “Door Locked” indication B. “Water Stop” indication C. “Water Tap Closed” indication D. Temperature Selection buttons E. Programme Selector Knob F. “Start Delay” button G. “Reset” button H. “Child Lock” button I. “Spin Speed Reduction” button J. Programme sequence indicator K. “Start/Pause” button

Programme

White Cotton

Coton

Care

labels

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

With heavily soiled laundry the additional “Prewash” option can be selected as well.

Type of wash/Notes

Max. Load

8.0

Detergents and additives Special Options Max.

Softener Bleach Main

❉❉

Wash

Yes

Selecting any option the indication lights up. When the combination of programme, additional options and temperature is not possible, the indication lights switch off automatically and a signal sounds.

: optional / yes: dosing required.

Prewash Start

Delay

Départ rétardé

Easy

Ironing

Anti-

froissage

Prewash

Pré-

lavage

❉

Intensive

Rinse

Rinçage

plus

Rinse Hold

Arrêt Cuve

Pleine

Speed

reduction

Essorage

❉❉❉❉ ❉ ❉ ❉

Temperatu r e

Spin

Speed

rpm

1400 20 to 95

°C

Coloured cotton

Couleurs

Easy Care/Synthetics

Synthétique

Daily Load 40°

Magic 40°

Chrono

Delicates

Couette

Wool

Laine

Handwash

Lavage Main

Rinse + Spin

Rinçage & Essorage

Intensive spin

Essorage

Gentle spin

Essorage doux

Drain

Vidange

For improved garment care spin speed is restricted to 1000 rpm in this programme.

For improved garment care spin speed is restricted to 400 rpm in this programme.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Slightly to normally soiled blouses, shirts etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Programme for slightly to normally soiled fabrics made of cotton and/or synthetic fibres.

Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.

Curtains and delicate dresses, skirts, shirts and blouses. Only woollens with a felt-free finish, labelled with the woolmark and

identified as machine washable.

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.

—

Same as the last rinse and the final spin in the “Coloured Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the

—

“Coloured Cotton” programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool”

—

programme. Drain only - no spinning. Alternative method of terminating programme after

—

“Rinse Hold”.

8.0

3.5

2.5

2.0

8.0

3.5

8.0

❉❉

❉

—Yes—

❉❉

❉

———— ———— ————

—Yes—

———

Yes

❉❉❉❉ ❉ ❉ ❉

❉❉❉❉ ❉ ❉

❉❉❉

❉❉

—

❉❉❉

❉❉❉❉ ❉ ❉

❉❉

——— —

❉

——— —

❉

——— — —— —

❉

——

—

❉❉❉

❉

Whirlpool is a registered trademark of Whirlpool USA

❉

1000

❉

1000

5019 301 15108

1400 20 to 60

20 to 60

1400 20 to 60

1400 20 to 30

20 to 40

— — —

400

1400

Black process 45.0° 100.0 LPI

3GB15108.fm Page 2 Monday, July 19, 2004 12:14 PM

CONSUMPTION DATA

Programme

White Cotton 95 8.0 80** 2.60 2:20 Coloured cotton 60 8.0 72 1.45 2:15 Coloured cotton 60 3.5 45 1.10 1:15 Coloured cotton 60 1.0 25 0.70 1:00 Coloured cotton 40 8.0 72 0.75 2:05

Easy Care/Synthetics 40 3.5 55 0.55 1:15

Daily Load 40° 40 3.5 45 1.00 1:00

Chrono 30 3.5 35 0.35 0:30

Delicates 30 2.5 65 0.45 0:50

Wool 40 2.0 60 0.50 0:35

Handwash 30 2.0 60 0.30 0:31

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured i n nor malized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the

household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump

drains the water out.

Temperature Selector

(°C)

ADD DETERGENT, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the programme table or in the chapter “Detergent and Additives” of the instructions for use.

1. Turn the

programme selector knob

to the

desired programme.

2. The remaining time display shows the duration of the chosen programme (in hours and minutes) and the pilot lamp of the

Pause”

button lights up.

“Start/

3. The programme sequence and the predefined spin speed indicators corresponding to the selected programme light up. The recommended temperature (see the indicator) can be altered by pressing the “+” or “-” button.

SELECT ANY DESIRED OPTION

• Can be used together with all programmes to

reduce creasing.

• Increases the water quantity and the clothes are

spun very gently.

“Prewash” button

• Only for heavily soiled laundry (e.g. sand, granular

dirt). The cycle time increases approx. 15 minutes.

Load

(kg)

Water

(l)

Energy

(kWh)

Approximate programme

duration*

(hours : minutes)

“Intensive Rinse” button

• More water and a longer time in rinse cycle is added.

• This option is particularly suitable for areas with very soft water, for baby clothes and to help people with allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without being spun: this prevents creasing and colours from changing.

• This option is particularly recommended for the programme “Synthetics” or “Delicates”.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Note:

The programme starts to “Rinse Hold” as soon as the “Rinse Hold” indicator light in the programme display lights up.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to the “Drain” programme and press the

“Start/Pause”

button again when flashing.

“Spin Speed Reduction” button

• Every programme has an automatic predefined

maximum spin speed.

• Press the button to set another spin speed.

• If the spin speed “0” is selected, the final spinning

is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time by 1 to 23 hours;

•Press the

“Start/Pause”

button.

• The time delay indication disappears when the programme starts and it is replaced by the remaining time.

• The number of hours preselected can later be reduced pressing again the “Start Delay” button.

To cancel the “Start Delay”.

• Turn the programme selector to the “ ” position.

• Reselect the desired programme and options and press the

“Start/Pause”

button.

PROGRAMME START

Turn on the tap and press the button. The pilot lamp of the

“Start/Pause”

button lights up. The indicator lamps shows the sequence reached in the programme. After starting the programme, the sequence indication runs from top to bottom through Prewash, Wash, Rinse, Spin. When a sequence of the programme is finished the corresponding lamp goes out.

ADD WASHING/DOO R LOCK

Each time a programme starts the door is locked, the “Door Locked” indication light comes on and approx.

0.5 litres of water enters the machine. In the

programmes White Cotton, Coloured Cotton, Easy Care/Synthetics, Daily Load 40° and Rapid Plus, for 10 minutes at the beginning of the Main Wash the programme can be interrupted by pressing the “Start/ Pause” button and the door can be opened again, e.g. to add more washing. After this time, the door remains locked until the end of the programme and must on no account be forced open. You will find more information about door locking in the Instructions for use.

PROGRAMME END

• The time remaining is “0:00” and the “End” light is on.

1. Turn the programme selector knob to the “ ”

position.

2. Turn the tap off and leave the door ajar to allow

the drum to dry out.

CHANGE THE PROGRAMME, TEMPERATURE, OPTIONS AFTER PROGRAMME START

1. Press the

“Start/Pause”

button to interrupt

the programme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Pres s t h e

“Start/Pause”

button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL A PROGRAMME BEFORE THE END

Press the “Reset” (

“Annulation”

) button at least for 3 seconds. Any existing water is drained out before the door can be opened.

CHILD LOCK

Detailed information can be found in the instructions for use.

The controls can be locked to avoid interference by children.

1. If the machine is off:

Turn the programme selector knob from the “0” position to any programme. Do not press

“Start/Pause”

the

button. Press the “Child Lock” button for 5 seconds. The “Child Lock” indicator lights up. Turn the programme selector knob to the OFF position “ ” again.

2. While a programme is running: Press the “Child Lock” button for 5 seconds. The child lock indicator will light up.

Now, in spite of the programme selector knob being turned, no programme can be started or altered. However, a running programme can be stopped at any time (e.g. in an emergency), by turning the programme selector knob to “ ”. Attempts at changing during the running programme are signalled by the lamp flashing. The indicator light for the actual programme running goes on. To unlock the controls, the machine must either have a programme running or be in select mode. Press the “Child Lock” button for 5 seconds. The child lock lamp will go out.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 15108

Black process 45.0° 100.0 LPI