Whirlpool ETPV 5760 IN, AWM 712, AWM 712/1 INSTRUCTION FOR USE

AWM 712

PROGRAMME TABLE

Cotton Synthetic

Cold wash Rinse hold

Delicate/Wool

Programme Type of textiles / Degree of soiling Max.

2 Cotton 95° C

3 Cotton 60° C

4 Synthetic 60° C

Cotton 95° C

with pre-wash

Cotton short 40° C

Synthetic short 40° C

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc). The max load for heavily soiled laundry is 3,5 kg.

Averagely soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc). The max load for heavily soiled laundry is 3,5 kg.

Averagely soiled, textiles in cotton and linen (shirts, towels,etc). The max load for heavily soiled laundry is 3,5 kg.

Averagely soiled textils in cotton, linen, polyester (Diolen, Trevira); polyamide (Perlon, Nylon), other synthetics or similar blends.

Lightly soiled textils in cotton, linen, polyester (Diolen, Trevira); polyamide (Perlon, Nylon), other synthetics or similar blends.

Detergent and Additives Special functions

Load

Pre-

wash

5,0

5,0 — Yes

2,0 — Yes

2,5 2,0

Wash Fabric

❉

—Yes

Yes

that can be selected

Softener

Cold

wash

Rinse

Hold

❉❉❉

Programme

selector

knob

6 Delicate 40° C 7 Wool 40° C

B Long spin

D Short Spin EDraining

Rinse and

long spin

Rinse and

short Spin

Curtains and delicate synthetic textiles (dresses, skirts and blouses etc). 1,5 — Yes Only machine washable woollens with pure new wool label. 1,0 — Yes

With this programme you can add fabric softner or starch. The programme ends with a long spin cycle.

This programme provides a long spin cycle, the same as the spin cycle in the Cotton programme. 5,0 — — — — — With this programme you can add fabric softener or starch.

The programme ends with a short spin cycle. This programme provides a short spin cycle, the same as the spin cycle in the Wool programme . 1,5 — — — — — Drain only, without spin. e.g to unload the laundry earlier. — — — — — —

5,0 — —

1,5 — —

❉❉❉ ❉❉

❉

—

6 7

❉

D E

CONSUMPTION DATA

Programme Water Energy Programme

duration

(l) (kWh) (min.)

Cotton 95° C

with pre-wash

Cotton 95° C 2 70 1,80 110 Cotton 60° C 3 70 1,20 90

Synthetic 60° C 4 60 0,90 85

Cotton short 40° C

Synthetic 40° C

Delicate 40° C 6 80 0,60 70

Wool 40° C 7 80 0,60 65

180 2,00 120

565600,70

0,60

75 75

SELECTING THE PROGRAMME

Turn the programme selector knob clockwise to the programme with the desired temperature.

PRESS THE DESIRED SPECIAL OPTION BUTTON

“Cold wash” button

• The water is used at the water supply temperature.

PROGRAMME START

1. Plug in the appliance.

2. Turn on the water supply tap.

3. Turn the “ON/OFF” / “Rinse Hold” knob to the position

• if you want to choose “Rinse Hold” (the programme will stop after the final rinse, without spinning and draining, and the laundry will remain in the water).

•“ON” if you want to have a complete washing cycle (without the “Rinse Hold” function).

DOOR LOCK

The door locks automatically after the programme start until the end of the programme.

PROGRAMME END

The programme is completed when:

• The programme selector stops in the position “I” (“Rinse Hold” NOT selected).

1. Switch OFF the machine by adjusting the “ON/OFF” / “Rinse Hold” knob to the position “OFF”.

2. Cancel the special options by pressing the appropriate buttons.

3. Turn the water supply tap(s) off.

4. Wait for the door to unlock (about 2 minutes).

5. Open the door and unload the machine.

Note:

Do not fully close the door but leave it ajar to allow the drum to dry out.

• The programme selector stops in the “Rinse Hold” position (“Rinse Hold” selected on the “ON/OFF” / “Rinse Hold” knob).

In this case you have 2 possibilities before removing your laundry:

• if you choose to remove the laundry without spin, position the programme selector

to the draining programme “E”. The machine will drain the water without spinning and the programme selector knob will come to rest in the stop position “I”.

• if you want the programme to terminate with spin and drain, turn the “ON/OFF” /

“Rinse Hold” knob to the position “ON”. The machine will automatically complete

the programme with rinse and spin and the programme selector knob will come to rest in the STOP position “I”.

Note:

We suggest you do not keep your laundry in the water for a long time after

completion of the wash.

In each of the above cases, terminate the programme by following steps 1-5 above.

5019 100 00027