3gb05439.fm Page 1 Wednesday, February 5, 2003 4:09 PM
GB
AWM 6125/3
A. Programme Sequence Indicator
B. “Start/Pause” Button
C. “Door Open” Indication
D. “Variable Spin” Button
Programme
Cotton/
Coloured cotton
Synthetics
Daily
Short
Delicates
Wool
Handwash
Rinse + spin —
Spin —
Gentle spin —
Drain —
Care
Labels
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts
etc. made of cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
polyamide (Perlon, Nylon) or blends with cotton.
Slightly to normally soiled textiles made of cotton and/or synthetics.
Shortly worn outer clothin g mad e o f cotton, polyester, poly amid e and bl ends wit h
cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
Only woollens with a felt-free finish, labelled with the woolmark an d id entifi ed as
machine washable .
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle
spin is used in this programme.
Same as the last rinse and the final spin in the “Coloured Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Coloured
Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool”
programme.
Drain only - no spinning. Alternative method of terminating programme after “Rinse
Hold”.
Type of wash/Notes
Max
Load
Kg
5.5
2.5
3.0
3.0
1.5
1.0
1.0
5.5
5.5
1.5
—
Detergents and additives Special options
Softener Main Wash Pre-
❉
❉
❉
❉
❉
❉
❉
❉
————————❉1250
————————
—————————
BA
Yes
Yes
C
wash
❉ ❉❉❉ ❉ ❉❉
❉ ❉❉❉ ❉ ❉
Yes —
Yes —
Yes
❉
Yes —
Yes —
——
Selecting any option the indication lights up.
When the combination of programme, additional
options and temperature is not possible, the
indication lights switch off automatically.
Unsuitable combinations of options are
deselected automatically.
❉
: optional / Yes : dosing required
1
For improved garment care spin speed is restricted to
800 rpm in this programme.
2
In this programme default spin speed can be increased
D
Easy
Ironing
Eco Prewash
❉
❉
——
——— —
——— —
❉
——
——
❉
——
till 400 rpm.
Intensive
Rinse
❉❉❉
❉❉❉
—
❉❉❉
Rinse
Hold
❉
❉
❉
Variable
Spin
1)
❉
1)
❉
1)
❉
—
1)
❉
Max
Spin
Speed
rpm
1250
800
1250
1250
800
800
400
1250
800
—
1)
1)
1)
2)
1)
Programme
Selector
Cotton
95°,60°,40°
Synthetics
60°,40°
Rapid
Delicates
40°,30°
Wool
Cold Wash
Hand Wash
Rinse &
Spin
Spin
Gentle Spin
Drain
Black process 45.0° 100.0 LPI
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 05439
3gb05439.fm Page 2 Wednesday, February 5, 2003 4:09 PM
CONSUMPTION DATA
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx.
Programme
Duration
(hours : minutes)*
Cotton 95 5.5 54** 1.90 2:05
Cotton 60 5.5 49 1.04 2:25
Cotton 40 5.0 44 0.60 2:10
Synthetics 60 2.5 55 0.80 1:35
Synthetics 40 2.5 55 0.60 1:25
Daily 40 3.0 45 0.50 1:00
Short 30 3.0 37 0.40 0:35
Delicates 40 1.5 60 0.60 0:50
Wool 30 1.0 60 0.30 0:45
Handwash 30 1.0 45 0.30 0:45
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in
the table in relation to the water supply pressure and temperature, the load and the type of wash.
* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the
household conditions applicable at that time.
**To reduce the water temperature, some cold water is added at the end of th e main wash cycle, before the pump dr ains th e
water out.
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE
PROGRAMME
Add the detergent as described in the programme
table or in the chapter “Detergents and Additives”
in the booklet.
1. Turn the
programme selector knob
to the
desired programme and temperature.
2. The remaining time display shows the duration of
the chosen programme (in hours and minutes)
and after taking some seconds for calculating,
the pilot lamp of the
“Start/Pause”
button is
flashing.
3. The programme sequence and the predefined
spin speed indication corresponding to the
selected programme lights up.
SELECT ANY DESIRED OPTION
Selecting any option the indication lights up.
“Easy Ironing” button
• Can be used togeth er wit h Cotton, Synt heti cs an d
Daily programmes to make ironing easier.
• Increases the water quantity and the clothes are
spun very soft.
“Eco Wash” button
• The duration of the wash is extended and the
temperature reduced to save up to 40% of energy
but maintaining good washing results.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. The cycle time increases
approximately 15 min.
“Intensive Rinse” button
• More water and a longer time in rinse cycle is
added.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
When the combination of programme, additional
options and temperature is not possible, the
indication lights switch off automatically.
Unsuitable combinations of options are
deselected automatically.
“Rinse Hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to
avoid creasing and prevent colours from
changing.
• This opti on is partic ularly r ecommen d ed f or th e
programme “Synthetics”, “Daily” and
“Delicates”.
• This function is particularly useful if you want
to postpone spinning to a later time, or if you
want to drain only.
Note:
The programme stops to “Rinse Hold” at the
time the “Rinse Hold” light in the programme flow
indication is on.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with
the final spin cycle for the present wash
programme.
• If you do n ot wish to spin the clothes , turn the
programme selector knob to the “Drain”
programme and pr ess the
“Start/Pause”
button
again when flashing.
“Variable Spin” button
• Every programme has an automatic predefined
maximum spin speed.
• Press the button to set another spin speed.
• If the spin speed “0” is selected, the final
spinning is cancelled but intermediate spin
peaks remain during rinse. The water is drained
out only.
PROGRAMME START
Open the tap and press the
The pilot lamp of the
“Start/Pause”
“Start/Pause”
button.
button lights up.
The indicator lamps show the sequence reached in
the programme. After starting the programme, the
sequence indication runs from left to right through
Wash, Rinse, Spin.
When the sequence of the programme is finished
the corresponding lamp goes out.
DOOR LOCK
The door can be opened when the “Door Open”
indication is on.
PROGRAMME END
• The remaining time is on “0:00” and all the
lights of the programme sequence indication
are off.
1. Turn the programme selector to the
“”
position.
2. Turn the water supply tap off.
3. Open the door and unload the machine.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
CHANGE THE PROGRAMME, OPTIONS AFTER
PROGRAMME START
1. Press the
“Start/Pause”
button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the
“Start/Pause”
button again. The
new programme continues at the same position
where the previous programme was
interrupted. Do not add detergent for this
programme.
CANCEL A PROGRAMME BEFORE THE END
1. Press the
“Start/Pause”
button to pause the
programme. The light flashes.
2. Set the programme selector to “Drain”. The
spin indicators show
“0”
and the remaining
time shows “0:02”.
3. Press the
“Start/Pause”
button to start the
drain programme.
Black process 45.0° 100.0 LPI
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 05439