Whirlpool AWG 5424, AWG 4423 INSTRUCTION FOR USE

Whirlpool is a registered trademark of Whirlpool USA

30120158GB.fm Page 1 Wednesday, June 25, 2008 6:21 PM

AWG 4423 - AWG 5424 PROGRAMME CHART

Programme

Tempe-

rature

Care

Labels

Max. Load

- For temperature selection, respect the manufacturer’s recommendations

on the care label

Type of wash/Notes

A. “On” indicator B. Programme selector C. Temperature selector D. “Prewash” button E. “Rinse hold” button F. “Intensive rinse” button G. “No spin” button H. “Start” button

Detergents and additives Special functions Pre-

wash

Main wash

Softener Pre-

wash

Intensive

rinse

Rinse

holdNospin

Max.

spin

speed

rpm

Cotton

Synthetics

Delicates

W ool

Daily load

Handwash

Quick wash

Cold wash

Delicate - Cold

Rinse

Drain/Spin

optional / Yes : dosing required

- 90 °C

*60 °C

- 60 °C

- 30 °C

- 40 °C

- 30 °C

—

—— ——

Normally to heavily soiled bed linen, table linen and underwear,

5.0

towels, shirts etc. made of cotton and linen.

Normally soiled blouses, shirts, overalls etc. made of polyester

2.5

(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

2.5 Curtains and delicate clothing, skirts, shirts and blouses.

—

Yes

Only woollens labelled with the Woolmark and identified as machine washable.

2.5

This programme (40°C) is tested and approved by The Woolmark

—

Yes

Company for handwashable wool.

3.5 Slightly to normally soiled garments made of cotton and/or synthetics.

Garments made of linen, silk, wool and viscose marked as

2.0

“handwashable”. Outer clothing worn for short periods and made of cotton, polyester,

2.5

polyamide and cotton blends.

Slightly soiled garments in cotton and/or synthetics washable only in cold

5.0

water.

2.5

Curtains and delicate clothing in wool or silk only washable in cold water.

5.0

Same as the last rinse and the final spin in the “Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the

5.0

“Cotton” programme.

The “wool” programme of this washing machine has been approved by The Woolmark Company for the washing of

garments labelled as “machine washable”. Follow the instructions given on the label sewn on the garment and the

instructions supplied by the washing-machine manufacturer. (Cert. no. M0402-M0403-M0404-M0405).

Yes

—

Yes

—

Yes

—

Yes

—

—— ———— — —

LL L

—

LL L LL

LL L

——

————

—

——

———

—

——

—

(AWG4423/5424)

5019 301 20158

400 / 500

Black process 45.0° 150.0 LPI

Whirlpool is a registered trademark of Whirlpool USA

30120158GB.fm Page 2 Wednesday, June 25, 2008 6:21 PM

CONSUMPTION DATA

Programme

Temperature

(°C)

Cotton 90 5.0 52

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. programme duration

(hours : minutes)

1.70 2:10

Cotton 70 5.0 52 1.28 2:05 Cotton

***

60 5.0 49 0.95 2:15

Cotton 40 5.0 62 0.51 2:00

Synthetics 60 2.5 46

0.80 1:40

Synthetics 40 2.5 46 0.46 1:35

Delicates 30 2.5 54 0.24 0:45

Wool 40 1.0 56 0.44 0:54

Handwash 30 2.0 65 0.24 0:57

Quick wash 40 2.5 30 0.40 0:40

Daily load 40 3.5 52 0.30 1:25

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. In domestic use, consumption data may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display (if present) can deviate from the values in the table, because it takes into account the household

conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference programme for energy label.

***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in the Instructions for Use.

1. Turn the

programme selector

to the desired

programme.

SELECT ANY DESIRED OPTION

Press the button(s) of any required option(s) - the respective indicator lights up.

When the combination of programme and additional option(s) is not possible,

the indicators switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (e.g. sand, granular dirt). Increases the cycle time by approx. 15 minutes.

• Do not use liquid detergent for the main wash when activating the prewash option.

“Intensive rinse” button

“Rinse hold” button

• The laundry remains in the last rinse water without the final spin cycle, to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the “Synthetics”, “Daily load” or “Delicates” programmes.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only .

• If you select “Rinse hold”, do not leave the laundry to soak for too long.

The programme stops to “Rinse hold” at

Note:

the time the “On” indicator blinks.

To terminate the “Rinse hold” option:

•Press the

“Start”

button; the programme will

terminate automatically with the final spin cycle.

“No spin” button

• Pressing this button excludes spinning at the end of the programme but the intermediate spin cycles remain. Water is drained out only.

• More water is added and the rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen, and helps people with allergies.

PROGRAMME START

Open the tap and press the

“Start”

. The “On”

indicator lights up and indicates that the cycle has begun.

“DOOR OPEN” INDICATOR

At the end of a programme, the “On” indicator blinks signalling that the door can be opened. As long as a wash programme is running, the door remains locked and must not be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

PROGRAMME END

• Lighting up of the “On” indicator means that the programme has ended and the door is unlocked.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGING PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Turn the programme selector to “Off/O”.

2. Select the new programme and any options.

3. Press the

“Start”

button again. The new programme resumes the wash programme from where the previous one was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

• Reset by turning the programme selector to “Off/0” and select the “Drain/Spin ” programme to remove the water remaining in the bowl before the door can be opened.

5019 301 20158

Black process 45.0° 150.0 LPI