Whirlpool AWE 9933 INSTRUCTION FOR USE

GB AWE 9933 PROGRAMME CHART

For further details please

refer to the User Guide

Programme

Cotton

Synthetics

Daily Mixed Slightly to normally soiled textiles made of cotton and/or synthetics

Rapid

Delicates Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Handwash

Wool

Rinse + Spin —

Spin —

Gentle spin —

Drain —

Care

Labels

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

For heavily soiled laundry the additional “Prewash” option can be selected as well.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Shortly worn outer clothing made of cotton, polyester, polyamide or blends with cotton.

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

If you select “Rinse Hold” do not leave items to soak for too long. Programme for treating the laundry with starch and soft en er or to

moisten the laundry. For delicate laundry reduce the spin speed to 400 800 rpm.

Programme to spin cotton or linen laundry intensively with maximum spin speed.

Programme to spin delicate laundry gently with a restricted spin speed. Drain only - no spinning. Alternative method of terminating programme

after “Rinse Hold”.

BED

Type of wash / Notes

Max.

load

Prewash Main

5.0

2.0

3.0

1.5

1.0

5.0

1.5

———————— — — —

N.B. This appliance is controlled by sensors. Please avoid excessive detergent dosing.

option / Yes: dosing required

❉

Do not use liquid detergents.

For improved garment care spin speed is restricted to lower spin speed in this programme.

For improved garment care spin speed is zero in this programme.

Favorites Button

You have the possibility to store preferred programme and option combinations. For further details please refer to User guide.

6th Sense

Lights up when time, energy and water settings are being automatically updated to optimise the washing performance.

Drum Up

Lights up during the automatic re-adjustment of the drum opening.

Reset Button

When selected before start button is pressed all selections and options are resetted. When selected after start button is pressed water is drained for about 2 minutes and End symbol will light up. New programme and options can be selected.

End

Appears in display when programme is ended and drum opening is in position.

Detergents and additives Special Options Tempera-

Softener Bleach Easy

Wash

Yes

❉

Yes

❉

Yes

—

Yes

—

Yes

❉

Yes

—

Yes

—

Yes

—

❉❉❉❉❉❉❉ ❉ ❉

—

❉

—

❉

——— — —

❉

———

❉

——— — —

❉

——— — —

❉

——— —

❉

Eco plus Prewash Intensive

Ironing

❉❉❉ ❉ ❉ ❉ ❉

——

❉

————————— —————————❉

A. Temperature Adjustment Button

B. Programme Sequence Indicators

C. Start/Pause button (press to start or pause

programme)

D. Water tap indicator (lights up when water

inlet is closed, please open tap)

E. Reset button When you select an option, the corresponding

indicator lights up, except if the combination of programme, additional options and temperature not possible.

Rinse

Hold

Spin Speed

Reduction

Start

Delay

❉❉ ❉❉

❉❉❉

—

❉

—

❉❉ ❉

❉❉

❉❉ ❉❉

❉❉

❉ ❉

Whirlpool is a registered trademark of Whirlpool USA

5019 312 10305

ture

°C

Max.

Spin

Speed

rpm

20 to 90 1400

20 to 60

1000 30 to 60 1400 20 to 30 1400 20 to 40 20 to 30

20 to 40

—

— —

800

—

800

1400

800

——

CONSUMPTION DATA

Programme

Temp e ratu r e Se l ecto r

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes)* Cotton 90/40 5.0 49**/48 1.60/0.60 2:05/2:00 Cotton 60 5.0 48 0.95 2:05

Cotton with Eco plus*** 60 5.0 48 0.85 2:15

Daily Mixed 40 3.0 45 0.45 1:00

Synthetics 60/40 2.0 55/50 0.70/0.50 1:30/1:15 Rapid Plus 30 3.0 35 0.40 0:30

Delicates 40 1.5 50 0.50 0:45

Wool 40 1.0 50 0.50 0:45

Handwash 30 1.0 35 0.40 0:35

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC\EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the

household conditions applicable at that time.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains

the water out.

***Reference Programme for Energy Label

PREPARATION OF WASH CYCLE

1. Close the drum door flaps and check that they are properly locked.

2. Add detergents and additives into the dispenser to no more then the

“MAX”

level mark, as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (if necessary)

3. Turn the

programme selector knob

to the desired programme. The remaining time of the chosen programme is shown in the display (in hours and minutes) and the indicator light of the

“Start/Pause”

button flashes. The predefefined temperature & spin speed corresponding to the selected programme are indicated in the display. The temperature (

+/-

) and spin speed can be changed by pressing the corresponding button.

SELECT THE DESIRED OPTION

When you select an option authorized by the programme, the corresponding indicator lights up, except if the combination of programme, additional options and temperature is not possible.

“Easy Ironing” button

• Can be used together with “Cotton”, “Synthetic” and “Daily Mixed” programmes to make ironing easier .

• Increases the water quantity in rinsing and the clothes are spun in a softer manner.

“Eco plus” button

• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption can be achieved.

“Prewash” button

• Only for heavily soiled loads (for example mud, granular dirt).

“Intensive Rinse” button

• The amount of water is increased to ensure a more intensive rinse.

• This option is particularly suitable for areas with very soft water or washing linen laundry for people with skin allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing from fading.

• This option is particularly recommended for the “Synthetic”, “Delicate” and “Daily Mixed” programmes.

• Use this option if you want to postpone spinning to a later time, or if you want to drain only.

Note:

The programme with “Rinse Hold” stops when the “Rinse Hold” is indicated in the display.

Appliance in “Rinse Hold”:

• If you want to continue the programme press

“Start/Pause”

the

button again: The programme will terminate automatically with the selected spin cycle. If the load is dry then please press the

“Start/Pause”

button.

• If you do not wish to spin the load, turn the programme selector knob to the “Drain” programme and press the

“Start/Pause”

button.

“Spin Speed Reduction” button

• Every programme has an automatically allocated maximum spin speed.

• Press the button until you have reached the requested spin speed indicated in the display. If the spin speed “0” is selected, the final spin is

•

cancelled, but not the intermediate spins. The programme ends with a drain cycle.

START DELAY

The “Start Delay” button allows the user to run the appliance at his convenience, for example at night when electricity is cheaper.

• Select programme, temperature and options.

• Press the “Start Delay” button several times to select the delay time by 1 to 24 hours (selected delay is indicated in display);

•Press the indicator light of the

“Start/Pause”

button. The

button lights up, the lamp of the “Start Delay” button flashes and the selected delay is indicated in the display.

• The time delay indication disa ppea rs when the programme starts and is replaced by the remaining time.

• The number of hours preselected can be reduced later by pressing the “Start Delay” button again.

To cancel the pre-selected “Start Delay”

• Turn the programme selector to the “ ” position.

• Reselect the desired programme and options and press the

“Start/Pause”

button.

PROGRAMME START

Open the tap and press the The indicator light of the

“Start/Pause”

button.

button lights up. At programme start the sequen ces reached by the programme are indicated in the display.

Note

: If there's a power cut during the cycle, the programme will continue automatically from where it was interrupted.

LID LOCK

For safety reasons, the lid is locked during certain phases of the cycle. At the end of the cycle or during an interruption, the lid unlocks automatically after about 1 minute.

END OF WASH CYCLE

• Upon programme end “ ” is shown in

the display.

1. Turn the programme selector to the “ ”

position.

2. Close the tap.

Open the lid and the door flaps and unload the

appliance.

CHANGE THE PROGRAMME OR OPTIONS DURING THE CYCLE

“Start/Pause”

Press

button. Select new programme and/or new options, temperature and spin speed and press

“Start/Pause”

button again. The new programme will continue at the same position where the previous programme was interrupted. Do not add detergent for this programme.

Note:

The “Start Delay” and “Prewash” cannot

be selected after a programme change.

PAUSE/INTERRUPT A PROGRAMME

If, for adding some forgotten pieces of clothing or any other reasons, you wish to interrupt or pause the programme for a certain time and continue it later:

1. Press the

“Start/Pause”

button.

The light flashes.

2. After the desired pause, press again on the

“Start/Pause”

button.

CANCEL PROGRAMME

To cancel a programme please press

Reset

button for 3 seconds.

Note:

After power cuts or disconnection from the mains after programme end, the LCD display may show the previously selected settings. In this case we suggest to check laundry’s humidity in drum. If laundry is damp, the cycle finished properly. Unload the drum and press

Reset Button

for 3 seconds before selecting a new cycle for next laundry.

Whirlpool is a registered trademark of Whirlpool USA

5019 312 10305