WHIRLPOOL ARG 913/A+ Daily Reference Guide
Quick guide
EN
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting the
appliance to the power supply.
Connect the appliance to the power supply and turn the thermostat
knob to switch on the appliance.
CONTROL PANEL
1.
3.
FREEZING FRESH FOOD
Place fresh food to be frozen on the grid in the freezer compartment,
avoiding direct contact with food that is already frozen.
The quantity of fresh food that can be frozen in 24 hours is written on
the rating plate.
To freeze fresh food, place the freezer compartment grid in the upper
position.
Before using the appliance carefully read the Safety
Instruction.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available).
1. Thermostat control reference
2. Freezer and refrigerator compartment
temperature
3. LED bulb
2.
FREEZER AND REFRIGERATOR COMPARTMENT TEMPERATURE
This Fridge/Freezer is switched on by means of the thermostat located
inside the refrigerator compartment.
The temperature of both compartments is adjusted by turning the
thermostat knob.
Thermostat set to 1/2 : minimum refrigeration
Thermostat set to 3-5 : medium refrigeration
Thermostat set to 6/7 : maximum refrigeration
Thermostat set to
Setting the thermostat knob to
Recommended setting:
- Refrigerator compartment: MEDIUM
To avoid food waste, please refer to the recommended setting and storage
times found in the online user manual.
: no refrigeration, no light
•
turns the whole appliance o.
•
HOW TO STORE FOOD AND BEVERAGE
Legend
COLDEST ZONE
LEAST COLD ZONE
REFRIGERATOR COMPARTMENT
Light system (depending on model)
This product contains a light source of energy
eciency class G
This product contains 4 lateral light sources of
energy eciency class A
This product contains a light source of energy
eciency class G
FREEZER COMPARTMENT
Freezing fresh food
1. It is advisable to set the temperature colder or turn on the Fast Freeze/
Fast Cool* at least four hours before removing the food from the
freezer compartment, to prolong the preservation of the food during
the defrosting phase.
2. To defrost, unplug the appliance and remove the drawers. Leave
the door open to allow the frost to melt. To prevent the water from
escaping during the defrost, it is advised that you place an absorbent
cloth on the bottom of the freezer compartment and wring it out
regularly.
3. Clean the inside of the freezer compartment and dry it carefully.
GENERAL INFORMATION
The drawers, baskets and shelves should be kept in their current position
unless otherwise specied in this quick guide. The light system inside the
refrigerator compartment uses LED lights, allowing for better lighting than
with traditional light bulbs, as well as for very low energy consumption.
This product contains 4 lateral light sources of
energy eciency class A and a top light source
of energy class G
This product contains a top light source of
energy eciency class G
4. Turn the appliance back on and put the food back inside. To remove
the frost on the STOP FROST* accessory, follow the CLEANING.
Ice cubes*
Fill 2/3 of the ice tray with water and put it back in the freezer
compartment. Do not, under any circumstances, use sharp or pointed
objects to remove the ice.
The quantity of fresh food that can be frozen in a specic time period is
indicated on the rating plate.
Load limits are determined by baskets, aps, drawers, shelves etc. Make
sure that these components can still close easily after loading.
Doors and lids of the refrigeration appliance should be removed before
disposal in the landll, to avoid children or animals getting trapped inside.
Loading...