Page 1
PRODUCT SHEET
.
A. Refrigerator Compartment
Fan with lamp and antibacterial filter
1.
Grids
2.
Crisper
3.
Crisper drawer divider
3a.
Rating plate
4.
Separator
5.
Removable shelf with a bottle holder
6.
Door trays
7.
B. Freezer Compartment
Upper basket (freezing zone)
8.
Ice tray
9.
Storage basket for frozen food items
10.
The freezer door trays for pizza or other frozen products
11.
with a short storage time
C. Control panel and LCD display
Note:
-
The fan
inside the refrigerator compartment, and optimizes food
storage conditions. The fan is turned on and off
automatically by an electronic system
Important:
The fan ONLY runs if the compressor is working. DO
NOT obstruct the air intake area with food items.
- Ambient temperatures, frequency of door opening and the
position of the appliance can affect the appliance's internal
temperatures.
-
The number of shelves
vary, depending on model. All shelves and door trays are
removable.
- The appliance
dishwasher.
helps achieve a better temperature distribution
and design of accessories may
accessories
are not suitable for washing in a
The
anti-bacterial
filter ensures a higher level of hygiene in
GB
your refrigerator through continuous purifying of circulating
air from bacteria. Remove it from the box found in the crisper
drawer (item 3) and insert into the grille (item 1).
Replace the filter every 6 months.
Remove the filter together with the grille and dispose as a
1.
whole.
Replace the filter and the grille with the new ones.
2.
The replacement procedure is attached with the filter.
3.
Our After-sales Service can supply this type of filter.
CONTROL PANEL DESCRIPTION
Compartments ON / OFF, menu, selection and
confirmation buttons
Refrigerator compartment Stand-by - ON/OFF button
1.
Menu button
2.
Appliance ON/OFF button
3.
Selected compartment temperature increase button
4.
Confirmation button
5.
Selected compartment temperature decrease button.
6.
Functions and settings symbols
Functions and settings for the refrigerator compartment
1.
Appliance, alarm and malfunction symbols
2.
Functions and settings for the freezer compartment.
3.
Switching on the appliance:
Switching off the appliance:
Adjusting the temperature:
inside the refrigerator or freezer compartment, press the
Menu button until the refrigerator or freezer temperature
symbol turns on (symbol flashes).
Then adjust the temperature by pressing the +/- buttons and
confirm by pressing “OK”.
Displaying the refrigerator and freezer compartment
temperatures.
The temperature inside the refrigerator compartment can be
adjusted between +2°C and + 8°C. In the same way, the
freezer compartment temperature can be adjusted between
-18°C and -24°C.
Press the On-Off button
Press the On-Off button again
To change the temperature
Page 2
GB
ELECTRICAL CONNECTION
When the appliance is connected to the power supply, the
display lights up and all the symbols appear on the display for a
few seconds.
The factory setting -18°C appears and flashes, the symbol
lits, while the refrigerator display shows a
temperature of +5°C (factory-set).While the appliance is
working to reach the factory-set temperature, the alarm icon
lits , an acoustic alarm sounds and temperature symbol on
the freezer display flashes (- -). This indicates that the
appliance has not yet reached the optimal temperature for
storage of foodstuffs.
Press and hold the button until the acoustic alarm
disables.
The icon disappears when the freezer compartment
reaches a temperature below -12°C, the display will show the
temperature -18°C, at which point food can be loaded into
the freezer compartment. After being switched on, the
refrigerator needs from 2 to 3 hours to reach the correct
temperature to store a typical volume of food in the
refrigerator compartment.
IMPORTANT:
•
If food is placed in the refrigerator before the appliance has
cooled completely, it may deteriorate.
•
Turning the refrigerator and freezer controls to a cooler
than recommended setting will not cool the compartments
any faster.
•
A built-in exterior moisture control continuously guards
against moisture build-up on the front edges.
Do not be alarmed if these edges sometimes feel warm to the
touch.
The inside light switches on when the refrigerator door is
opened. After 10 minutes of door opening the light switches
off.
GUIDE TO SELECTING FUNCTIONS
Functions are not available until freezer compartment reaches
the temperature below -12°C.
Functions and settings for the refrigerator
compartment.
Refrigerator compartment door open
Refrigerator compartment temperature setting
Fast cooling
This function should be selected before
refrigerating fresh food. To select the function, keep
pressing the menu button until the display shows
the fast cooling symbol . The symbol flashes,
press OK to confirm. The function is automatically
disabled after 6 hours, or can be manually disabled
by repeating the same procedure.
Vacation
This function turns the refrigerator compartment to
a warmer state if you are going away for some time.
To select the function, keep pressing the menu
button until the display shows the vacation symbol
. Press OK to confirm. To turn the refrigerator
back to setting point repeat this procedure.
Important:
all perishable foodstuffs from the refrigerator
compartment and leave the door closed, since the
refrigerator maintains a suitable temperature to
prevent the formation of unpleasant odours.
ON/OFF
This function turns off both the refrigerator and
freezer compartments. To enable the stand-by
function, press the “on-off” button for 3 seconds,
two hyphens appear on both display to indicate that
the appliance is on stand-by. To switch the appliance
on again, follow the same procedure until the
previously set temperature is shown on the display.
When the appliance is on stand-by the light inside
the refrigerator compartment does not work.
Remember that this operation does not disconnect
the appliance from the power supply.
after activating this function, remove
Fridge Stand-by
This function turn off the fridge compartment while
the freezer compartment continue to run.To enable
the stand-by function, press the “Fridge stand-by”
button for 3 seconds. To switch the fridge
compartment on again, follow the same procedure
until the previously set temperature is shown on
the display. When the fridge compartment is on
stand-by the light inside the refrigerator
compartment does not work.
Page 3
GB
Functions and settings for the freezer
compartment
Freezer compartment temperature setting
Fast freezing
This function must be activated before freezing
fresh food. To select the function, keep pressing the
menu button until the display shows the fast freeze
symbol. Press OK to confirm. The function is
automatically disabled after 24 hours, or can be
manually disabled by repeating the same procedure.
“Half load” function
When the freezer is only partially full, put all the
food in the central basket and select the function by
pressing the Menu button until the energy saving
symbol appears.The symbol flashes, press OK
to confirm.
Party mode
To select the function, keep pressing the menu
button until the display shows the party mode
symbol .
The symbol flashes, press OK to confirm. Use this
function to chill drinks inside the freezer
compartment.When the function is in operation,
the symbol is animated. 30 minutes after selection
(the time required to chill a 0.75 l bottle without
the glass breaking), the symbol flashes, an acoustic
alarm sounds and the display lights up: remove the
bottle from the freezer compartment and press the
OK button to disable the function.
Important:
freezer compartment longer than the time
necessary for chilling.
do not leave the bottle inside the
Appliance, alarm and malfunction symbols
“6th Sense” function
The 6th Sense function is automatically activated
when:
•
a large amount of food is loaded into the
refrigerator and/or freezer
•
the refrigerator and/or freezer door is left open for
a long time
•
a prolonged power failure takes place, causing the
internal temperature of the appliance to increase
to values that cannot guarantee safe storage of
food.
The symbol flashes for approximately 3 seconds,
after which it remains permanently lit until optimal
storage conditions have been automatically restored.
Control panel lock function
This function prevents anyone from inadvertently
changing settings or switching off the appliance.
To lock the control panel, press buttons “+” - “OK”
- “-” at the same time for 3 seconds until the display
shows the symbol : an acoustic signal confirms
the function has been selected. To disable the
function, follow the same procedure until the symbol
switches off.
Alarms
In the event of an alarm, the acoustic alarm and
indicator lights are activated.
Freezer temperature alarm
The acoustic alarm sounds: alarm symbol lights up
and the temperature indicator flashes.
The alarm is activated when:
•
The appliance is connected to the power supply for
the first time or after prolonged disuse
•
The freezer compartment temperature is too high
•
The quantity of foods loaded into the freezer
exceeds that indicated on the data plate
•
The freezer door has been left open for a long time
in these cases automatically appears on the
Note:
display
Power failure alarm
The maximum temperature reached during a power
failure flashes on the freezer display. The alarm
symbol lights up and the acoustic alarm sounds at the
same time. This alarm may activate when:
•
There had been a prolonged power failure, and the
freezer internal temperature rose to the level that
does not guarantee appropriate food storage
conditions.
To disable the alarm press OK, after which the
pre-set temperature will appear on the display.
evaluate the state of the stored food.
Note:
Operation alarms
In the event of operation alarms, other alarms will
also be displayed in the refrigerator or freezer
compartment, depending on the malfunction site,
(e.g. CF, AL01, AL02, AL03 or AL04 etc...) call Aftersales Service and specify the alarm code.
Refrigerator door open alarm
The refrigerator door symbol lights up and the
acoustic alarm sounds.
The alarm is activated when the refrigerator's door is
left open for more than 2 minutes. Press OK to mute
the acoustic alarm.
If the door is not closed, the acoustic alarm will
sound again after two minutes.Close the door/s and
press the OK button.
in these cases 6th Sense automatically appears
Note:
on the display
Page 4
GB
Malfunction and After-sales Service symbol
(Call After-sales Service)
Listeria indicator - the coldest zone inside the
refrigerator (depending on model)
Coldest temperature inside the refrigerator
The symbol indicates the coldest zone in the
refrigerator compartment. For optimum
temperature adjustment, the refrigerator is provided
with a temperature indicator to allow you control
the average temperature.
Checking the temperature
After the appliance has been switched on for at least
24 hours, can be checked if the temperature in the
refrigerator is correct and, if necessary, adjust the
setting as indicated in the user instructions (see
“Adjusting the temperature”).
The internal temperature of the refrigerator
depends on various factors such as the ambient
temperature of the room, the amount of food stored
and how often the door is opened. These factors
should be taken into account when setting the
appliance.
If the symbol is switched OFF, it means that the
temp. inside the refrigerator is too warm; in this case
adjust the temperature setting and wait for at least
12 hours before checking again if the temp, is
correct.
IMPORTANT
: after opening the door or loading the
refrigerator, it is normal if the symbol is switched
OFF for some time, especially if room temperature
is very warm.
Cleaning
Press the Stand-by button, which allows you to
switch off the refrigerator compartment alone,
keeping the freezer on.The refrigerator
compartment can now be emptied and cleaned.
Changing the position of shelves:
Your refrigerator allows you to change the position
of shelves according to your needs.
•
To remove the shelf, pull it forward to the stop.
•
Keep the lock pressed down as shown in the
picture detail, and pull the shelf frontward until it is
released. The locks can be pressed separately.
•
Pull the pins outward to remove the rails.
•
Remove the rails as in the picture and place them
where you wish.
•
To place the rails observe the inscription “ ”
V
written on the rail.
•
After that, place the shelf on them.
FAN COMPONENTS
1.
Fan base
2.
Fan cover
3.
Light bulbs
4.
Fan
5.
Antibacterial filter grille
6.
Notches for removing the cover
How to replace the light bulb
Before replacing the light bulb, make sure to disconnect the
appliance from the mains power supply.
Immediately afterwards:
•
Remove the fan cover by grasping the notches (6) and
pulling outwards.
•
Remove the bulb by pulling it out (the bulb is of a special
push-in type - do not rotate the bulb).
•
Check the bulb and, if necessary, replace it with a new one:
Push the bulb into the fitting till it stops.
•
Mount the cover so that it clicks.
Warning:
•
Do not leave the bulb uncovered
•
The bulb must not exceed 15W.
•
It is available at our After-Sales Service outlets.
5019 637 01013
Loading...