Whirlpool ALPIN 1400 INSTRUCTION FOR USE

WA Alpin 1400

PROGRAMME GUIDE

A. “Water Tap” Indication B. “Waterstop” Indication C. “Door Free” Indication D. “Start Delay” Button E. Programme Sequence Indicator

F. Temperature Selection Buttons G. “Spin Speed Reduction” Button H. “Power On” Indication

Programme Care Label Type of fabric /

Cotton

Kochwäsche

Coloured

Cotton

Buntwäsche

Synthetics

Pflegeleicht

Programme

Kleinewäsche

Delicates

Feinwäsche

Wool

Wolle

Hand Wash

Handwäsche

Rinse + Spin

Spülen +

Schleudern

Intensive

Spin

Intensiv-

schleudern

Gentle Spin

Schon-

schleudern

Drain

Abpumpen

1) For improved garment care spin speed is restricted to 1000 rpm in this programme.

2) For improved garment care spin speed is restricted to 400 rpm in this programme.

—

Degree of soiling

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

—5.0

—1.5

——

Max. LoadkgDetergent and Additives

Softener

Normal 5.0

Rapid 3.0

Normal 5.0

Rapid 3.0

Normal 2.5

Rapid 1.5

3.0

1.5

1.0

ABC

Main

Prewash

Wash

yes

❉

yes

❉

yes

❉

yes

❉

yes

❉

yes

❉

yes

❉

———

❉❉

❉❉❉❉❉❉❉ ❉

❉❉❉❉❉❉❉❉

—

❉❉

—

——

Selectable Special Options =

Start

Rapid Eco Prewash Intensive

Delay

❉

max 60°

❉

❉❉ ❉❉ ❉

—— — —

—

❉❉

—— — —

—— — — —

—— — — — —

❉

Temperature

Selector

°C

20 to 95 1400

20 to 60 1400

20 to 60

20 to 30 1400

20 to 40

20 to 30

— 1400

—

——

Rinse

—

❉

Rinse

Spin Speed

Hold

Reduction

❉❉

❉❉ ❉❉

❉❉

Automatic Safety Function

This machine is equipped with automatic safety functions which detect and diagnose faults and reacts appropriately (see “Troubleshooting Guide”).

Max. Spin

Speed

rpm

With heavily soiled laundry the additional “Prewash” option can be selected as well.

If “Rapid” is chosen, the additional options “Eco” and “Prewash” are deselected.

If “Rapid” is chosen, the additional

options “Eco” and “Prewash” are

1000

deselected. In this programme, selection of

“Prewash”, “Rapid”, “Eco” and “Intensive Rinse” is not possible.

“Rapid”, “Intensive Rinse” is not

1000

possible in this programme. If you select “Rinse Hold” do not leave

1000

items to soak for too long.

If you select “Rinse Hold” do not leave

items to soak for too long. A very

400

gentle spin is used in this programme. Same as the spin cycle in the

“Coloured Cotton” programme. In this programme spinning is

intensive. Same as the spin cycle in the “Coloured Cotton” programme.

In this programme spinning is gentle.

Same as the spin cycle in the “Wool”

1000

programme. Drain only - no spinning. Alternative

method of terminating programme after “Rinse Hold”.

Notes

5019 100 03836

Overview of consumption data

Programme

Cotton Coloured Cotton Coloured Cotton

Coloured Cotton + Rapid

Synthetics Synthetics

Programme

Delicates

Wool

Handwash

Prewash cycle increases programme duration by approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. The data on the “Energy Label” refer to programme “Coloured Cotton 60° C”. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account

the household conditions applicable at that time.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the

pump drains the water out.

Temperature

(°C)

95 5.0 44 60 5.0 39 0.95 2 : 00 40 5.0 39 0.55 1 : 45 30 3.0 32 0.40 0 : 50 60 2.5 55 0.70 1 : 30 40 2.5 50 0.50 1 : 15

30 3.0 35 0.40 0 : 30 30 1.5 50 0.50 0 : 45

40 1.0 50 0.50 0 : 40 30 1.0 35 0.40 0 : 35

Max. Load

(kg)

Water

(l)

Energy

(kWh)

1.60 1 : 55

Programme Duration*

approx.

(hour : minutes)

ADD DETERGENT, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the chapter “Detergent and Additives” in the booklet.

1. Turn the

• The remaining time display shows the duration of the chosen programme (in hours and minutes) and the pilot lamp of the

2. The programme sequence and the predefined spin speed indication corresponding to the

selected programme lights up.

3. The recommended temperature (see the indicator) can be altered by pressing “+” or “-” button.

programme selector knob

“Start/Pause”

to the desired programme.

button is flashing.

PRESS ANY DESIRED OPTION BUTTON(S). The pilot lamp lights up.

An audible tone sounds if the combination of programme, additional options and temperature is not possible. Unsuitable combinations of options are deselected automatically. “Eco Wash” button

• The duration of the wash is extended and the temperature reduced to save up to 40% of energy maintaining good washing results.

“Rapid Wash” button

• For quick, economical washes. Ideal for minimum loads of lightly-soiled articles.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. The cycle time increases by approximately 15 min.

“Intensive Rinse” button

• A further rinse cycle is added.

• This option is particularly suitable for areas with very soft water washing baby linen and helps people with allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics” or “Delicates”.

• This function is particularly useful if you want to postpone spinning to a later time.

Note:

The programme stops to “Rinse Hold” at the time the “Rinse Hold” button light flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the drain programme and press the

“Start/Pause”

button again.

“Spin Speed Reduction” button

• Every programme has an automatic predefined maximum spin speed.

• Press the button to set another spin speed.

• If the spin speed “0” is selected, the final spinning is cancelled. The water is drained out only.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s co nvenience, for example at night when electricity is cheaper.

• Press the “Start Delay” button to select the delay time by 1 to 19 hours;

• Press the

“Start/Pause”

button. The “Start Delay” light flashes until the programme starts.

• The time delay indication disappears when the programme starts and it’s replaced by the remaining time.

• The number of hours preselected can later be reduced pressing again the “Start Delay” button.

To cancel the “Start Delay”.

• Turn the programme selector to the

• Reselect the desired programme and options and press the

“ ”

position.

“Start/Pause”

button.

PROGRAMME START

Open the tap and press the

“Start/Pause”

button. The pilot lamp of the up. The indicator lamps show the sequence reached in the programme. After starting the programme, the sequence indication runs from left to right through Wash, Rinse, Spin. When the sequence of the programme is finished the corresponding lamp goes out.

“Start/Pause”

button lights

DOOR LOCK

During the first 15 minutes of the cotton and synthetics programmes the door can be opened for adding further laundry. This is not possible if “Rapid Wash” is selected. The door can be opened when the “Door Free” indication is shining.

PROGRAMME END

• The remaining time is on “0:00” and all the lights of the programme sequence indication are off.

A short audible tone sounds three times.

1. Turn the programme selector to the

“ ”

position.

2. Turn the water supply tap off.

3. Open the door and unload the machine.

CHANGE THE PROGRAMME, TEMPERATURE, OPTIONS AFTER PROGRAMME START

1. Press the

2. Select the new programme (with temperature), an y opti ons an d ano ther s pin sp eed i f yo u wan t it.

3. Press the

the previous programme was interrupted. Do not add detergent for this programme.

“Start/Pause”

button to pause the programme. The light flashes.

button again. The new programme continues at the same position where

TO CANCEL A PROGRAMME BEFORE THE END

1. Press the

2. Set the programme selector to “Drain”. The spin indicators show

shows 2 minutes.

3. Press the

“Start/Pause”

button to pause the programme. The light flashes.

“0”

and the remaining time

button to start the drain programme.