Whirlpool AKT 820/IX, AKT 820/BA PROGRAM CHART
AKT 820
A
DE GB FR NL ES PT IT GR SE NO DK FI PL CZ SK HU RU BGRO LT LV EE
PRODUCT DESCRIPTION SHEET
2
3
1.
Radiant cooking zone Ø 145
2.
Radiant dual cooking zone Ø 210
3.
Radiant cooking zone Ø 145
4.
Radiant oval dual cooking zone
5.
Display
Important:
To avoid permanently damaging the glass-ceramic
top, do not use:
- Pots with bottoms that are not perfectly flat.
- Metal pots with enamelled bottom.
F
E A
B
C
D
ny aesthetic defects (scratches, surface marks,
etc.) must be reported immediately upon
1
5
4
installation.
DIMENSIONS OF THE HOB (mm)
A
On/Off
B
Cooking zone selection and heat setting increase
C
Heat setting decrease
To switch the hob on, hold down buttonA for about 2 seconds. The 4 cooking zone displays show
seconds none of the cooking zones is activated, the hob switches off automatically as a safety precaution.
Press one of the buttons
Select the heat setting required with buttons
to cancel all settings.
IMPORTANT:
first press the selection button
CHILD SAFETY
The
The Child Safety function locks all the hob's other functions, with the exception of the On/Off button
remains on even after the hob has been switched off and on again. It can cancelled by holding down button
dot above the function button switches off.
TIMER
The
programme the timer for a given cooking zone, first select the desired cooking zone using one of the buttons
the function, press the button with the clock symbol
zone selected. Within 20 seconds, set the cooking time using buttons
function begins automatically and the red indicator dot remains lit.
At the end of the set cooking time, an acoustic signal sounds. If a cooking zone has been programmed to operate with the
timer, it is switched off and the red indicator dot switches off too.
The timer can be used to programme all cooking zones to work simultaneously.
To use the function as a minute minder, press button
set time has elapsed, an acoustic signal sounds.
DUAL COOKING ZONE
cooking zone.
RESIDUAL HEAT INDICATOR.
When the cooking zone is switched off, the residual heat indicator
H
the temperature of the hob returns within safety levels.
IMPORTANT:
triggers automatic switch-off of the cooking zone (for example, after around 1 hour at maximum heat setting, the cooking zone
switches off).
function (if available) can be used both as a minute minder and as a timer for a selected cooking zone. To
For safety reasons, the hob is equipped with an automatic cut-off function. Prolonged use of the same heat setting
“B”
corresponding to the cooking zone you intend to use.
the control is deactivated 10 seconds after the heat setting has been selected. To change the heat setting,
“B”
function is switched on by holding down button
function (if available). Press the button
“B”
or
again, then proceed to change the setting, using buttons
D
Activates/deactivates the dual cooking zone
E
Child safety device
F
Timer
“0”
. If within 20
“C”
. Heat settings go from 1 to 9. Press buttons +/- at the same time
“B”
“C”
or
.
“E”
until a dot lights up above the function button.
“F”
. A dot lights up next to the timer display, indicating the cooking
“F”
and then buttons
“F”-“C”
(1-99 min). After 20 seconds, the timer
“F”-“C”
to set the desired time. When the
“d”
to deactivate or activate the outer ring of the dual
“H”
remains on or flashes alternating with
“A”
. This function
“E”
“B”
“0”
until the
. To select
until
Type PLEAA
5019 319 01005
230 V ~ /400 V 3 N ~ 50 Hz 6.3 Kw
Loading...