Whirlpool AKT 811/IX INSTALLATION
AKT 811
A
DE GB FR NL ES PT IT GR SE NO DK FI PL CZ SK RU BG HU RO LV LH EE
PRODUCT DESCRIPTION SHEET
2
1
5
DIMENSIONS OF THE HOB (mm)
3
1.
Radiant cooking zone Ø 145
2.
Radiant dual cooking zone Ø 210
3.
Radiant cooking zone Ø 145
4.
Radiant cooking zone Ø 180
5.
Display
Important:
To avoid permanently damaging the glass-ceramic
top, do not use:
- Pots with bottoms that are not perfectly flat.
- metal pots with enamelled bottom.
ny aesthetic defects (scratches, surface marks,
etc.) must be reported immediately upon
4
installation.
A
B
C
H
IMPORTANT:
triggers automatic switch-off of the cooking zone (for example, after around 1 hour at maximum heat setting, the cooking zone
switches off).
E A
On/Off
Cooking zone selection and heat setting increase
Heat setting decrease
To switch the hob on, hold down button A for about 2 seconds. The 4 cooking zone displays show
If within 20 seconds none of the cooking zones is activated, the hob switches off automatically as a safety precaution.
Press one of the buttons
Select the heat setting required with buttons
to cancel all settings.
IMPORTANT:
first press the selection button
CHILD SAFETY
The
The Child Safety function locks all the hob's other functions, with the exception of the On/Off button
remains on even after the hob has been switched off and on again. It can cancelled by holding down button
dot above the function button switches off.
DUAL COOKING ZONE
cooking zone.
RESIDUAL HEAT INDICATOR.
When the cooking zone is switched off, the residual heat indicator
the temperature of the hob returns within safety levels.
For safety reasons, the hob is equipped with an automatic cut-off function. Prolonged use of the same heat setting
B
C
D
D
Activates/deactivates the dual cooking zone
E
Child safety device
“0”
.
“B”
corresponding to the cooking zone you intend to use.
“B”
“C”
or
. Heat settings go from 1 to 9. Press buttons +/- at the same time
the control is deactivated 10 seconds after the heat setting has been selected. To change the heat setting,
“B”
again, then proceed to change the setting, using buttons
function is switched on by holding down button
function (if available). Press the button
“D”
“H”
“E”
until a dot lights up above the function button.
to deactivate or activate the outer ring of the dual
remains on or flashes alternating with
“B”
or
“C”
.
“A”
. This function
“E”
“0”
until the
until
Type PLEAA 230 V ~ /400 V 3 N ~ 50 Hz 6.2 Kw
5019 319 01067
Loading...