Whirlpool AKT 802 PRODUCT DESCRIPTION SHEET

AKT 802

DE GB FR NL ES PT IT GR SE NO DK FI PL CZ SK HU RU BG RO LT LV ET

PRODUCT DESCRIPTION SHEET



1

2

1.

Radiant dual cooking zone Ø 280

.

Radiant cooking zone Ø 145

.

Radiant dual cooking zone Ø 180

.

Display

mportant:

o avoid permanently damaging the glass-ceramic

op, do not use:
Pots with bottoms that are not perfectly flat.
Metal pots with enamelled bottom.

ny aesthetic defects (scratches, surface marks,

tc.) must be reported immediately upon

nstallation.

34

DIMENSIONS OF THE HOB (mm)

Type PLEAA

5019 319 01343

230 V ~ /400 V 3 N ~ 50 Hz 5.7 kW

B

C

E

A

D

A On/Off D Activates/deactivates the dual cooking zone

B Cooking zone selection and heat setting increase E Child safety device
C Heat setting decrease

To switch the hob on, hold down button “A” for about 2 seconds. The 4 cooking zone displays show “0”. If within
20 seconds none of the cooking zones is activated, the hob switches off automatically as a safety precaution.
Press one of the buttons “B” corresponding to the cooking zone you intend to use.
Select the heat setting required with buttons “B” or “C”. Heat settings go from 1 to 9. Press buttons +/- at the
same time to cancel all settings.
IMPORTANT: the control is deactivated 10 seconds after the heat setting has been selected. To change the
heat setting, first press the selection button “B” again, then proceed to change the setting, using buttons “B”
or “C”.

The CHILD SAFETY function is switched on by holding down button “E” until a dot lights up above the
function button. The Child Safety function locks all the hob's other functions, with the exception of the On/Off
button“A”. This function remains on even after the hob has been switched off and on again. It can cancelled by
holding down button “E” until the dot above the function button switches off.

DUAL COOKING ZONE function (if available). Press the button “D” to deactivate or activate the outer ring
of the dual cooking zone.

RESIDUAL HEAT INDICATOR.
When the cooking zone is switched off, the residual heat indicator “H” remains on or flashes alternating with

H

“0” until the temperature of the hob returns within safety levels.

IMPORTANT: For safety reasons, the hob is equipped with an automatic cut-off function. Prolonged use of the same

heat setting triggers automatic switch-off of the cooking zone (for example, after around 1 hour at maximum heat setting,
the cooking zone switches off).