Whirlpool AKR 606 IX, WA SENSE 44 DI BK, AKR 773 IX INSTRUCTION FOR USE

40105508GB.fm Page 1 Friday, September 18, 2009 3:51 PM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

C D

}

E. Programme selector F. “Start” button G. Spin speed selector

H. Programme sequence indicator

I. “Reset” button J. “Start delay” button

K. Time display

Programme

Cotton /

Hygienic +

40 - 60 - 95 °C

SuperEco

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Lingerie

30 °C

Rinse & Spin Spülen & Schleudern

Spin Schleudern

Drain Abpumpen

= optional / Yes = dosing required.

❉

For improved garment care, spin speed is restricted to 1000 rpm in this programme.

For improved garment care, spin speed is restricted to 400 rpm in this programme.

40 - 60 - 95 °C

SuperEco

60 °C

Pflegeleicht

30 - 40 - 60 °C

Feinwäsche

30 - 40 °C

Mischwäsche

40 °C

Schnelle Wäsche 30min.

30 °C

Wolle

Kalt - 40 °C

Handwäsche

40 °C

Dessous

30 °C

Care

Labels

— —

——

Max

Load

- Respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. Selecting “Cotton 95”, this programme eliminates bacteria, ensuring

6.0

sanitization of your laundry . The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

Normally to heavily soiled and robust bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more

6.0

favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

Normally soiled blouses, shirts, overall s e tc . made of polyester (Diolen,

3.0

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

1.5

Slightly to normally soiled textiles made of cotton and/or synthetics.

4.0

Shortly worn outer clothing made of cotton, polyester, polyamide and

4.0

blends with cotton. Only woollens, labelled with the Woolmark and identified as machine washable.

This programme (40°C) is tested and approved by The Woolmark

1.0

Company for machine washable wool. Textiles made of silk, linen, wool and viscose marked as “handwashable”.

This programme (40°C) is tested and approved by The Woolmark

1.0

Company for handwashable wool. This cycle is particularly suitable to treat delicate lingerie (use of a

1.0

laundry net strongly recommended).

Same as the last rinse and the final spin in the “Cotton” programme.

6.0

In this programme spinning is intensive. Same as the spin cycle in the

6.0

“Cotton” programme. Drain only - no spinning. Alternative method of terminating programme

after “Rinse Hold”.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. WM0619

Type of wash/Notes

Detergents and additives Special options

Pre-

Main

Wash

Yes

Softener Start

❉❉❉❉❉ ❉❉❉

❉❉

❉❉❉❉❉ ❉❉❉

❉❉

❉❉ ❉❉

❉❉

wash

❉

—

❉

—

— —

—— —— —

—— —

delay

Start-

vorwahl

❉ ❉

Clean +

Pre-

wash

Vor-

wäsche

Easy

ironing

Leicht

bügeln

Intensive

Intensiv

spülen

———

—

——

❉

❉❉❉❉

——— — ——— —

——— ——— — —

——— — — — —

Rinse

rinse

hold

Spül-

stopp

Variable

spin

Schleudern

❉❉❉

❉❉

❉❉ ❉❉

❉❉❉

❉

5019 401 05508

Max Spin

Speed

rpm

max.

1000

max.

1000

400

max. max.

Black process 45.0° 150.0 LPI

40105508GB.fm Page 2 Friday, September 18, 2009 3:51 PM

CONSUMPTION DATA

Programme

Cotton / Hygienic + 95 6.0 59

Cotton

***

Cotton 40 6.0 60 0.70 2:00

SuperEco 60 6.0 51 0.72 4:00 Synthetics 60 3.0 50 Synthetics 40 3.0 46 0.50 1:20

Delicates 30 1.5 60 0.50 0:45 Daily load 40 4.0 45 0.50 1:00

Quick wash 30 4.0 45 0.40 0:30

Wool 40 1.0 60 0.50 0:45

Handwash 40 1.0 45 0.50 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* **

***

Lingerie 30 1.0 45 0.40 0:36

The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. Reference Programme for Energy Label.

Temperature

(°C)

60 6.0 49 1.02 2:20

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the programme and temperature.

2. The programme (in hours and minutes), and the indication lamp next to the

3. The lights up.

programme selector

time display

indication lamp

shows the duration of the chosen

“Start”

of the predefined spin speed

to the desired

button flashes.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Clean +” button

• Choose this option if you use an in-wash additive for

stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Selectable for programmes “Cotton” and “Synthetics”;

choose temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for stain

removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

• Prolongs the programme by approx. 10 to 15 minutes.

Load

Water

(kg)

• Appropriate for use of stain removers and bleaches on

“Prewash” button

• Only for heavily soiled loads (for example sand,

• Do not use liquid detergent for the main wash when

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and

• Increases the water quantity an d the clothes are spun

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

“Rinse hold” button

• The laundry remains in the last rinse water without

• This option is particularly recommended for the

• It is particularly useful if you want to postpone spinning

• Do not leave the laundry to soak in the rinse hold for

Terminate the “Rinse hold” option:

• Press the

Energy

(l)

(kWh)

1.90 2:00

0.80 1:35

oxygen basis.

not be used!

granular dirt) sensible. Increases the cycle time by approximately 15 min.

selecting “Prewash”.

“Daily load” programmes to make ironing easier. very gently.

water , washing baby linen and helping people with allergies.

progressing to the final spin cycle to avoid creasing and prevent colours from changing.

programmes “Synthetics”, “Daily load” and “Delicates”. to a later time, or if you want to drain only. too long.

The programme stops to “Rinse hold” at the

Note:

time the “Rinse hold” light in the programme sequence indication is on. The indication lamp next to the

button flashes.

“Start”

terminate automatically with the final spin cycle for the present wash programme.

“Start”

Approx. Programme Duration

(hours : minutes)

Chlorine or perborate bleaches must

button; the programme will

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

“Start”

button.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay time by 1 to 23 hours;

• Press the The indication light next to the “Start delay” button lights up and the countdown of the delay time begins.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the of hours preselected can be reduced by pressing again the “Start delay” button.

To cancel the “Start delay” ...before you press the “Start” button:

• Turn the programme selector to another position or press the

...after having pressed the “Start” button:

• Press the start delay time disappears from the time display.

button.

“Start”

button.

“Reset”

button for at least 3 seconds - the

“Reset”

button, the number

PROGR AMME START

Open the tap and press the indication lamp next to the programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.

button. The

“Start”

button lights up. The

“Start”

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the The light flashes.

2. Select the new programme and, if you want, another spin speed and any options.

3. Press the continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

button to pause the programme.

“Start”

button again. The new programme

“Start”

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

• Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds. Any

“Reset”

existing water is drained out before the door can be opened.

5019 401 05508

Black process 45.0° 150.0 LPI