Whirlpool ADP 659 WH, AWO/D 43105, ADP 659/S INSTRUCTION FOR USE

GB AWO/D 43105 PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Programme

Cotton with prewash

Synthetics with prewash

95 °C

Cotton

40 - 60 - 95 °C

60 °C

40 - 60 - 95 °C

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 °C

Quick wash

30 °C

Wool

Cold - 40 °C

- 40 °C

Handwash

40 °C

Lingerie

30 °C

Rinse & Spin —

Care

Labels

- for temperature selection, respect the manufacturer’s recommendations on the care label

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

This cycle is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended).

Same as the last rinse and the final spin in the “Cotton” programme.

C D

Type of wash/Notes

A B

E. Programme selector F. “Start/Pause” button G. Programme sequence indicator

H. “Reset” button

Max

Detergents and additives Special options

Pre-

Main

Load

wash

5.0 Yes Yes

5.0

—

2.5 Yes Yes

2.5

—

1.5

—

3.0 — Yes

1.0 — Yes

5.0 — —

Wash

Yes

Softener Spin

reduction

❉❉

❉❉❉

❉

❉ ❉❉

speed

Cold wash

— 1000

❉

— 1000

❉

——

—

❉

— 1000

Spin

Speed

rpm

1000

400

Spin —

Gentle Spin —

Drain —

: optional / Yes : dosing required

❉

For improved garment care, spin speed is restricted to 400 rpm in this programme.

Cold wash option is selectable only for the lowest temperature step of the programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. Water is drained only without any spinning.

5.0 — — —

1.0 — — —

❉ ❉

— 1000 — 1000

———— — ——

Whirlpool is a registered trademark of Whirlpool USA

5019 301 10259/A

CONSUMPTION DATA

Programme

Temperature

(°C) Cotton 95 5.0 49 Cotton

***

60 5.0 44 0.85 2:20

Load

(kg)

Water

(l)

Energy

Approx. Programme

Duration

(kWh)

(hours : minutes)

1.90 2:00

Cotton 40 5.0 44 0.60 2:00

Synthetics 60 2.5 50

0.70 1:30

Synthetics 40 2.5 45 0.55 1:15

Delicates 30 1.5 50 0.50 0:45

Quick wash 30 3.0 40 0.40 0:30

Wool 40 1.0 55 0.60 0:45

Handwash 40 1.0 45 0.60 0:40

Lingerie 30 1.0 45 0.50 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The remaining time indicator can deviate from the values in the table, because it takes into account the household

conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains

the water out. Reference Programme for Energy Label.

***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in your Instructions for Use. Close the door and turn the

programme selector

to the

desired programme and temperature. The indication lamp next to the

“Start /Pause”

button flashes.

“Cold wash” button

• Water is heated only up to 20°C

• Suitable for delicate laundry items with wash temperature recommendation of max. 30° on the care label.

• Selectable only on the lowest temperature step of each programme.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lamp lights up.

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Spin speed reduction” button

• Reduces the predetermined automatic maximum spin speed to treat your laundry more gently.

PROGRAMME START

Open the tap and press the

“Start/Pause”

button . The indication lamp next to the

button lights up. The programme

Pause”

“Start/

sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

When the programme phase is finished, the corresponding indication goes out.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

“Start/Pause”

button to pause

the programme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the

“Start/Pause”

button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

“Reset”

button cancels a programme

before the end.

•Press the

“Reset”

button for at least 3 seconds. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 10259/A