Whirlpool 1W10287573A User Manual
DRYER USER INSTRUCTIONS
®
You
You can be killed or seriously injured if you don't immediately
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
INSTRUCTIONS POUR L'UTILISATEUR DE LA SÉCHEUSE
Table of Contents
DRYER SAFETY ....................................................................... 1
CONTROL PANEL .................................................................... 4
CYCLE GUIDE .......................................................................... 5
DRYER USE .............................................................................. 6
DRYER CARE ........................................................................... 7
TROUBLESHOOTING .............................................................. 9
WARRANTY ............................................................................ 11
ASSISTANCE OR SERVICE ................................BACK COVER
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your appliance to
help you obtain assistance or service if you ever need it. You will
need to know your complete model number and serial number.
You can nd this information on the model and serial number
label, located at the top inside dryer door well.
Dealer name _____________________________________________
Serial number ____________________________________________
Address __________________________________________________
Phone number ____________________________________________
Model number ____________________________________________
Purchase date ____________________________________________
Table des matières
SÉCURITÉ DE LA SÉCHEUSE .............................................. 12
TABLEAU DE COMMANDE ................................................... 16
GUIDE DES PROGRAMMES ................................................. 17
UTILISATION DE LA SÉCHEUSE .......................................... 18
ENTRETIEN DE LA SÉCHEUSE ............................................ 19
DÉPANNAGE .......................................................................... 21
GARANTIE .............................................................................. 23
ASSISTANCE OU SERVICE ............. COUVERTURE ARRIÈRE
Conservez ce manuel et votre reçu de vente ensemble pour
référence ultérieure. Pour le service sous garantie, vous
devez présenter un document prouvant la date d'achat ou
d'installation.
Inscrivez les renseignements suivants au sujet de votre appareil
ménager pour mieux vous aider à obtenir assistance ou service
en cas de besoin. Vous devrez connaître le numéro de modèle
et le numéro de série au complet. Cette information est donnée
sur la plaque signalétique indiquant les numéros de modèle et
de série, située dans le logement de la porte à l'intérieur de la
sécheuse.
Nom du marchand ________________________________________
Numéro de série __________________________________________
Adresse __________________________________________________
Numéro de téléphone _____________________________________
Numéro de modèle _______________________________________
Date d'achat _____________________________________________
DRYER SAFETY
W10287573A
1
IMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1/NFPA 54.
The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National
Electrical Code, ANSI/NFPA 70.
2
WARNING: For your safety, the information in this manual must be followed to minimize
the risk of re or explosion, or to prevent property damage, personal injury, or death.
– Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this
or any other appliance.
– WHAT TO DO IF YOU SMELL GAS:
•
Do not try to light any appliance.
•
Do not touch any electrical switch; do not use any phone in your building.
•
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
•
If you cannot reach your gas supplier, call the re department.
– Installation and service must be performed by a qualied installer, service agency, or
the gas supplier.
•
Clear the room, building, or area of all occupants.
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend that you use a gas detector approved by UL or CSA.
For more information, contact your gas supplier.
If a gas leak is detected, follow the “What to do if you smell gas” instructions.
WARNING
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in death
or re.
Check Your Vent System for Good Air Flow
Along with heat, dryers require good air ow to efciently dry
laundry. Proper venting will reduce your drying times and improve
your energy savings. See Installation Instructions.
The venting system attached to the dryer plays a big role in good
air ow.
Replace plastic or foil vent material with 4" (102 mm) ■
diameter heavy, rigid vent material.
Use the shortest length of vent possible. ■
Use no more than four 90° elbows in a vent system; each ■
bend and curve reduces air ow.
Service calls caused by improper venting are not covered by the
warranty and will be paid by the customer, regardless of who
installed the dryer.
Maintain Good Air ow by:
Cleaning your lint screen before each load. ■
Good Better
Remove lint and debris from the exhaust hood. ■
Remove lint from the entire length of the vent system at least ■
every 2 years. When cleaning is complete, be sure to follow
the Installation Instructions supplied with your dryer for nal
product check.
Clear away items from the front the dryer. ■
3
CONTROL PANEL
Not all features and options are available on all models.
Appearance may vary.
Cycle Selector (Timer) Control
Automatic Dry/ACCUDRY™ System
The Automatic dry cycle takes the guesswork out of drying time
and enhances fabric care. The Automatic Dry cycle may be used
for most loads.
On some models, your dryer uses the electronic ACCUDRY™
system. The control senses the moisture level in the load and
shuts off when the load reaches the selected dryness.
The Cycle Selector (Timer) control may be set to ENERGY
PREFERRED, which is good for most fabrics. At the end of the
cycle, you may check the dryness of the load.
If the load is drier than you like, select a setting closer to ■
Less Dry the next time you dry a similar load.
If the load is not as dry as you want, select a Timed cycle ■
to complete drying and the next time you dry a similar load,
choose a setting closer to Very Dry.
Drying time with an automatic cycle varies according to the type
of fabric, size of load, and temperature setting. On some models,
the temperature is included in the cycle selections.
WRINKLE SHIELD™ Setting (on some models)
The WRINKLE SHIELD™ features will run after your drying cycle
is complete. It periodically starts and stops the dryer, tumbling
the load without heat to help avoid wrinkling.
On some models, WRINKLE SHIELD™ automatically starts at the
end of the cycle. Opening the door will stop this feature. On other
models, you can set the WRINKLE SHIELD™ selector knob to
ON or choose the amount of time the feature runs.
NOTE: A signal will sound periodically when the WRINKLE
SHIELD™ setting is selected, but only if the End of Cycle signal
is also selected.
Timed Dry
On some models, temperature is included in the cycle selections.
On models with a selectable temperature knob, you may choose
a setting based on the fabrics in your load. Drying time and
temperature will depend on your dryer model.
Temperature Control
(on some models)
Select a drying temperature based on the fabrics in your load. If
you are unsure of the temperature to select for a load, select the
lower setting rather than the higher setting.
Temperature Tips
If your dryer has multiple heat settings:
A High heat setting may be used for drying heavyweight ■
items such as towels and work clothes.
A Low to Medium heat setting may be used for drying ■
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
An Extra-Low heat setting may be used for drying lightweight ■
items such as lingerie.
Use a no heat (air) setting for rubber, plastic, or heat- ■
sensitive fabrics.
Line dry bonded or laminated fabrics. ■
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
4
If the WRINKLE SHIELD™ feature is selected and the End of
End of Cycle Signal Control
(on some models)
The End of Cycle signal sounds when a cycle is complete. On
some models, the End of Cycle Signal is xed. On other models,
the End of Cycle Signal is selectable and the signal will sound
only if set to On.
Cycle Signal is on, the signal sounds every few minutes. The
signal stops when you open the door or turn the Cycle Control
knob to Off.
CYCLE GUIDE
Not all cycles and settings are available on all models.
CYCLES LOAD TYPES FEATURES TEMPERATURE
AUTOMATIC DRY or
ACCUDRY™
Automatic Dry
High Heat
Automatic Dry
Low Heat
Jeans Denims Thoroughly dries denims. Medium or High
Towels Towels, Mattress
Very Dry or
More Dry
*Energy Preferred
Automatic Setting
Delicate Small loads,
Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness
level. Gives the best drying in the shortest time. Drying time varies based on fabric type, load size, and
dryness setting.
Depending on model, temperature may be selected on cycle knob or be a separate control.
Jeans, heavy work
clothes, towels
Casual, shirts, pants,
lightweight items
pads, quilts
Jeans, heavy work
clothes
Most loads Use this dryness level as your starting point for automatic
lightweight items
Gives the best drying in the shortest time. Drying time
varies based on fabric type, load size, and dryness setting.
Gives the best drying in the shortest time. Drying time
varies based on fabric type, load size, and dryness setting.
Thoroughly dries extra-heavy items. High
This dryness level removes more load moisture than the
Energy Preferred cycle. Dries heavy seams.
drying.
Gently dries delicate items. Low or Extra Low
High
Low
Any
Any
Less Dry Most loads This dryness level removes less moisture than the Energy
TIMED DRY Will run the dryer for the specied time on the control.
Depending on model, temperature may be selected on cycle knob or be a separate control.
Timed Dry
High Heat
Heavy Dry or
Heavy Duty
Damp Dry Any load Dries items to a damp level or for items that do not require
Tumble Press
Air Only or
Fluff Air
SPECIAL SETTINGS These settings are added at the end of certain cycles to reduce wrinkling.
Cool Down All loads This is the last step in a cycle that uses heat. The load is
Wrinkle Shield™ Any load *Periodically starts and stops dryer, tumbling the load
*On some models, the dryer continuously tumbles the load, without heat, for up to 30 or 40 minutes or until the dryer door is opened.
®
Heavy or bulky items Completes drying if items are still damp. High
Large or heavy items
such as thick towels
or robes
Any load Helps smooth out wrinkles, such as those found in clothes
Rubber, plastic, heat
sensitive fabrics
Preferred cycle. Seams of garment may feel slightly damp.
Use for loads you may want to complete drying on a
hanger.
Evenly dries large or heavy loads. High
an entire drying cycle.
packed in a suitcase or in items wrinkled from being left in
the dryer too long.
No-heat drying. No heat
cooled slowly to reduce wrinkling and make it easier to
handle.
to avoid wrinkling.
Any
Any
Low or Medium
heat depending on
fabrics in load
No heat
No heat
5
WARNING
Explosion Hazard
Keep ammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
ammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or re.
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or re.
WARNING: To reduce the risk of re, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this dryer.
This guide covers several different models. Your dryer may not
have all of the cycles and features described.
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
1. Clean lint screen before each load. See “Cleaning the Lint
Screen.”
2. Load clothes loosely into the dryer and close the door. Do
not pack the dryer. For best results, allow space for clothes
to tumble freely.
3. Turn the Cycle Control knob to the recommended cycle
for the type of load being dried. Use the Energy Preferred
Automatic Setting to dry most heavy to medium-weight
fabrics.
4. If your dryer has a Temperature selector, set it to the
recommended setting for the type of fabric being dried.
See “Cycle Guide” for temperature suggestions. On some
models, temperature is included in the cycle selections.
5. (OPTIONAL) Your dryer may have a Wrinkle Shield™ feature
selector. Use this to avoid wrinkling when you are unable to
remove a load from the dryer as soon as it stops.
6. (OPTIONAL) Your dryer may have an End of Cycle Signal.
The signal is helpful when drying items that should be
removed from the dryer as soon as it stops.
The End of Cycle signal is part of the Start button and is
selectable. Turn the Start button to ON or OFF. The signal will
sound only if the selector is set to On.
7. If desired, add fabric softener sheet. Follow package
instructions.
8. Push the Start button or knob.
Stopping and Restarting
You can stop your dryer anytime during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFF.
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
6
DRYER USE
Starting Your Dryer
To restart your dryer
Close the door. Select a new cycle and temperature (if desired).
Push the Start button.
Use the Drying Rack to dry items such as sweaters and pillows
without tumbling. The drum turns, but the drying rack does not
move.
If your model does not have a drying rack, you may be able to
purchase one for your model. To nd out whether your model
allows drying rack usage and for information on ordering, please
refer to the front page of the manual or contact the dealer from
whom you purchased your dryer.
NOTE: The drying rack must be removed for normal tumbling.
To use the drying rack
1. Place drying rack in dryer.
Slide rear pegs into the dimples on the back wall of the dryer.
Lower the front legs to rest on the dryer opening.
2. Put wet items on top of drying rack, leaving space between
items. Do not allow items to hang over the edge of the drying
rack. Close the door.
3. Select a Timed Dry cycle and temperature, or an air cycle.
Items containing foam, rubber, or plastic must be dried on
a clothesline or by using an air cycle. Refer to the following
table.
4. Start the dryer. Reset cycle to complete drying, if needed.
Rack Dry Cycle Temp Time
Washable wool items
(block to shape, lay at
on drying rack)
Stuffed toys/pillows
(cotton or polyester lled)
Stuffed toys/pillows
(foam rubber lled)
Drying Rack
(Optional on some models)
Timed
Dry
Timed
Dry
Air
(no heat)
Low 60 min.
Low 60 min.
N/A 90 min.
DRYER CARE
Cleaning the Dryer Location
Keep dryer area clear and free from items that would block the
air ow for proper dryer operation. This includes clearing piles of
laundry in front of the dryer.
Cleaning the Lint Screen
Clean lint screen before each load. A screen blocked by lint can
increase drying time.
IMPORTANT:
Do not run the dryer with the lint screen loose, damaged, ■
blocked, or missing. Doing so can cause overheating and
damage to both the dryer and fabrics.
If lint falls off the screen into the dryer during removal, check ■
the exhaust hood and remove the lint. The exhaust hood is
located where the dryer air exits your home.
Every Load Cleaning
Style 1:
1. The lint screen is located on top of the dryer. Pull the lint
screen toward you. Roll lint off the screen with your ngers.
Do not rinse or wash screen to remove lint. Wet lint is hard to
remove.
Style 2:
1. The lint screen is located in the door of the dryer. Pull the lint
screen straight up. Roll lint off the screen with your ngers.
Do not rinse or wash screen to remove lint. Wet lint is hard to
remove.
2. Push the lint screen rmly back into place.
As Needed Cleaning
1. Roll lint off the screen with your ngers.
2. Wet both sides of lint screen with hot water.
3. Wet a nylon brush with hot water and liquid detergent. Scrub
lint screen with the brush to remove residue buildup.
4. Rinse screen with hot water.
5. Thoroughly dry lint screen with a clean towel. Replace screen
in dryer.
Cleaning the Dryer Interior
1. Apply a liquid, nonammable household cleaner to the
stained area of the drum and rub with a soft cloth until stain
is removed.
2. Wipe drum thoroughly with a damp cloth.
3. Tumble a load of clean cloths or towels to dry the drum.
NOTE: Garments that contain loose dyes, such as denim blue
jeans or brightly colored cotton items, may discolor the dryer
interior. These stains are not harmful to your dryer and will not
stain future loads of clothes. Dry these items inside out to avoid
drum staining.
Removing Lint
From Inside the Dryer Cabinet
Lint should be removed every 2 years, or more often, depending
on dryer usage. Cleaning should be done by a qualied servicer.
2. Push the lint screen rmly back into place.
From Inside the Exhaust Vent
Lint should be removed every 2 years, or more often, depending
on dryer usage.
7
Vacation and Moving Care
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Vacation Care
Operate your dryer only when you are at home. If you will be on
vacation or not using your dryer for an extended period of time,
you should:
1. Unplug dryer or disconnect power.
2. If you have a gas dryer, close shutoff valve in gas supply line.
3. Clean lint screen. See “Cleaning the Lint Screen.”
Moving care - Gas Dryers
1. Unplug the power supply cord.
2. Close shutoff valve in gas supply line.
3. Disconnect gas supply line pipe and remove ttings attached
to dryer pipe.
4. Cap the open fuel supply line.
5. Make sure leveling legs are secure in dryer base.
6. Use masking tape to secure dryer door.
Moving care - Electric Dryers
For power supply cord-connected dryers:
1. Unplug the power supply cord.
2. Make sure leveling legs are secure in dryer base.
3. Use masking tape to secure dryer door.
For direct-wired dryers:
1. Disconnect power.
2. Disconnect wiring.
3. Make sure leveling legs are secure in dryer base.
4. Use masking tape to secure dryer door.
Changing the Drum Light
(on some models)
1. Unplug dryer or disconnect power.
2. Open the dryer door. Locate the light bulb cover on the back
wall of the dryer. Using a Phillips head screw driver, remove
the screw located in the lower right-hand corner of the cover.
Remove the cover.
3. Turn bulb counterclockwise. Replace the bulb with
a 10-watt appliance bulb only. Replace the cover and secure
with the screw.
4. Plug in dryer or reconnect power.
8
Loading...