Whelen TANBKT1 User Manual
®
ENGINEERING COMPANY INC.
®
1. Insert the mounting bolts into the opening
in the extrusion and slide them into
position.
1.
1.
2. Secure the bracket to the extrusion
using the supplied mounting
hardware.
2.
2.
10 - 24 ELASTIC STOP NUT
#10 FLAT WASHER
10 - 24 X 1/2"
HEX HD METAL
SCREW
1. Insert the mounting bolts into the opening
in the extrusion and slide them into
position.
1.
1.
2. Secure the bracket to the extrusion
using the supplied mounting
hardware.
2.
2.
10 - 24 ELASTIC STOP NUT
#10 FLAT WASHER
10 - 24 X 1/2"
HEX HD METAL
SCREW
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Fax: (860) 526-4078
Installation Guide:
Traffic Advisor™ Mounting Bracket
Model: TANBKT1
Internet: www.whelen.com
Sales e-mail: autosale@whelen.com
Canadian Sales e-mail: canadiansales@whelen.com
Customer Service e-mail: custserv@whelen.com
Automotive: Traffic Advisor
©2012 Whelen Engineering Company Inc.
Form No.14611 (080112)
ENGINEERING COMPANY INC.
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Fax: (860) 526-4078
For warranty information regarding this product, visit www.whelen.com/warranty
Installation Guide:
Traffic Advisor™ Mounting Bracket
Model: TANBKT1
Internet: www.whelen.com
Sales e-mail: autosale@whelen.com
Canadian Sales e-mail: canadiansales@whelen.com
Customer Service e-mail: custserv@whelen.com
Automotive: Traffic Advisor
©2012 Whelen Engineering Company Inc.
Form No.14611 (080112)
For warranty information regarding this product, visit www.whelen.com/warranty
Page 1
3.
NOTE: The bracket is shown here mounted toward the outside of the extrusion as one
example. Brackets can be positioned at any location along the length of the extrusion
for different applications.
Mount the bracket(s) to the vehicle using customer supplied hardware.
IMPORTANT! It is the responsibility of the installation technician to make sure that the installation and operation of this
product will not interfere with or compromise the operation or efficiency of any vehicle equipment!
IMPORTANT! Permanent mounting of this product will require drilling. It is absolutely necessary to make sure that no
other vehicle components could be damaged by this process. Check both sides of the mounting surface before starting.
If damage is likely, select a different mounting location.
IMPORTANT! Before returning this vehicle to active service, visually confirm the proper operation of this product, as well
as all vehicle components/equipment.
SIDE VIEW
3.
NOTE: The bracket is shown here mounted toward the outside of the extrusion as one
example. Brackets can be positioned at any location along the length of the extrusion
for different applications.
Mount the bracket(s) to the vehicle using customer supplied hardware.
IMPORTANT! It is the responsibility of the installation technician to make sure that the installation and operation of this
product will not interfere with or compromise the operation or efficiency of any vehicle equipment!
IMPORTANT! Permanent mounting of this product will require drilling. It is absolutely necessary to make sure that no
other vehicle components could be damaged by this process. Check both sides of the mounting surface before starting.
If damage is likely, select a different mounting location.
IMPORTANT! Before returning this vehicle to active service, visually confirm the proper operation of this product, as well
as all vehicle components/equipment.
SIDE VIEW
Page 2
Loading...