Whelen TADP8FT User Manual

ENGINEERING COMPANY INC.
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Fax: (860) 526-4078
®
Installation Guide:
Rear Deck Mounting Bracket
2011 Ford Taurus & Police Interceptor
Internet: www.whelen.com Sales e-mail: autosale@whelen.com Canadian Sales e-mail: canadiansales@whelen.com Customer Service e-mail: custserv@whelen.com
Automotive: Lightheads
IMPORTANT! It is the responsibility of the installation technician to make sure that the installation and operation of this product will not interfere with or compromise the operation or efficiency of any vehicle equipment!
Installation:
1. On the rear deck, locate the 3 outboard caps covering the child restraint strap holders. Remove the plastic covers to access the tether strap holders (Fig. 1).
2. Install the mounting bracket as shown in Fig 2. Be sure
to tighten the mounting hardware firmly.
3. Secure the Traffic Advisor to the mounting bracket as shown using the provided hardware. Confirm that the Traffic Advisor is level and clears the 3rd brake light.
4. Extend the Traffic Advisor wires to your power source. It is left to the installation technician's discretion to select a path for the wires that will not damage them or
©2011 Whelen Engineering Company Inc. Form No.14459 (020211)
For warranty information regarding this product, visit www.whelen.com/warranty
®
ENGINEERING COMPANY INC.
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Fax: (860) 526-4078
interfere with the operation of any vehicle components or equipment.
5. Refer to the Traffic Advisor manual for wiring and fusing.
WARNING! All customer supplied wires that connect to the positive terminal of the battery must be sized to supply at least 125% of the maximum operating current and be FUSED USE CIRCUIT BREAKERS WITH THIS PRODUCT!
IMPORTANT! Before returning the vehicle to active service, visually confirm the proper operation of this product, as well as all vehicle components/equipment.
CAUTION! DO NOT LOOK DIRECTLY AT THESE LED’S WHILE THEY ARE ON. MOMENTARY BLINDNESS AND/OR EYE DAMAGE COULD RESULT!
at the battery to carry that load. DO NOT
IMPORTANT WARNING!
Installation Guide:
Dominator™ Traffic Advisor™
Rear Deck Mounting Bracket
2011 Ford Taurus & Police Interceptor
Internet: www.whelen.com Sales e-mail: autosale@whelen.com Canadian Sales e-mail: canadiansales@whelen.com Customer Service e-mail: custserv@whelen.com
IMPORTANT! It is the responsibility of the installation technician to make sure that the installation and operation of this product will not interfere with or compromise the operation or efficiency of any vehicle equipment!
Installation:
1. On the rear deck, locate the 3 outboard caps covering the child restraint strap holders. Remove the plastic covers to access the tether strap holders (Fig. 1).
2. Install the mounting bracket as shown in Fig 2. Be sure
to tighten the mounting hardware firmly.
3. Secure the Traffic Advisor to the mounting bracket as shown using the provided hardware. Confirm that the Traffic Advisor is level and clears the 3rd brake light.
4. Extend the Traffic Advisor wires to your power source. It is left to the installation technician's discretion to select a path for the wires that will not damage them or
Automotive: Lightheads
©2011 Whelen Engineering Company Inc. Form No.14459 (020211)
interfere with the operation of any vehicle components or equipment.
5. Refer to the Traffic Advisor manual for wiring and fusing.
WARNING! All customer supplied wires that connect to the positive terminal of the battery must be sized to supply at least 125% of the maximum operating current and be FUSED USE CIRCUIT BREAKERS WITH THIS PRODUCT!
IMPORTANT! Before returning the vehicle to active service, visually confirm the proper operation of this product, as well as all vehicle components/equipment.
CAUTION! DO NOT LOOK DIRECTLY AT THESE LEDS WHILE THEY ARE ON. MOMENTARY BLINDNESS AND/OR EYE DAMAGE COULD RESULT!
For warranty information regarding this product, visit www.whelen.com/warranty
at the battery to carry that load. DO NOT
IMPORTANT WARNING!
Page 1
Fig. 1
CHILD RESTRAINT BRACKETS
W
O
D
N
I
W
R
A
E
R
ROOF
Mounting Bracket (Qty. 3)
REAR DECK
5/16 - 18 X 1 Hex Hd Bolt
INSIDE
OF TRUNK
Existing bracket for tether strap
Fig. 1
#10 Flat Washer
10 - 24 Elastic
Stop Nut
Spacer
holder (Infant car seat)
10-24 Mounting Bolt
CHILD RESTRAINT BRACKETS
Fig. 2
REAR WINDOW
Mounting Bracket (Qty. 3)
REAR DECK
5/16 - 18 X 1 Hex Hd Bolt
INSIDE
OF TRUNK
Existing bracket for tether strap
W
R
A
E
R
#10 Flat Washer
10 - 24 Elastic
Stop Nut
Spacer
holder (Infant car seat)
W
O
D
N
I
ROOF
10-24 Mounting Bolt
Fig. 2
REAR WINDOW
Page 2
Loading...