Whelen M6FC600 User Manual

ENGINEERING COMPANY INC.

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: [phone]

Fax: [phone]

®

Installation Guide:

600 Series to M6 Series Flange Adapter

Model M6FC600

Internet: www.whelen.com
Sales e-mail: [e-mail]
Canadian Sales e-mail: [e-mail]
Customer Service e-mail: [e-mail]

Mounting:

1. Remove the existing 600 series lighthead and gasket
from the mounting surface.

2. Mark the M6 flange mounting hole locations onto the
mounting surface either by using the flange as a
template or the measurements shown. Drill four, 1/4”
mounting holes.

3. Insert two #8 square grommets into the M6 flange and
secure lighthead to flange with two #8 sheet metal
screws.

NOTE: Due to application varriations, cutting and/or
drilling may be required for the square grommets.

4. Secure the lighthead assembly to the vehicle as shown
using the hardware provided.

5. Extend the wires to your power source and connect as
shown in the lighthead manual.

Automotive: Lightheads

©2009 Whelen Engineering Company Inc.
Form No.14338A (051311)

Mounting Gasket

M6 Flange

#8x1" PPHSMS

Grommet

Gasket

Bushing

#8x1"
PPHSMS

M6 Lighthead

6.5"

M6 Mounting Configuration

3.5"

All Mounting Holes - .250" Dia.

For warranty information regarding this product, visit www.whelen.com/warranty

®

ENGINEERING COMPANY INC.

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: [phone]

Fax: [phone]

Mounting:

1. Remove the existing 600 series lighthead and gasket
from the mounting surface.

2. Mark the M6 flange mounting hole locations onto the
mounting surface either by using the flange as a
template or the measurements shown. Drill four, 1/4”
mounting holes.

3. Insert two #8 square grommets into the M6 flange and
secure lighthead to flange with two #8 sheet metal
screws.

NOTE: Due to application varriations, cutting and/or
drilling may be required for the square grommets.

4. Secure the lighthead assembly to the vehicle as shown
using the hardware provided.

5. Extend the wires to your power source and connect as
shown in the lighthead manual.

Installation Guide:

600 Series to M6 Series Flange Adapter

Model M6FC600

Internet: www.whelen.com
Sales e-mail: [e-mail]
Canadian Sales e-mail: [e-mail]
Customer Service e-mail: [e-mail]

Mounting Gasket

M6 Flange

#8x1" PPHSMS

Grommet

Gasket

Bushing

#8x1"
PPHSMS

M6 Lighthead

6.5"

M6 Mounting Configuration

3.5"

All Mounting Holes - .250" Dia.

Automotive: Lightheads

©2009 Whelen Engineering Company Inc.
Form No.14338A (051311)

Page 1

For warranty information regarding this product, visit www.whelen.com/warranty