Whelen L6BKT3 User Manual
ENGINEERING COMPANY INC.
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Fax: (860) 526-4078
®
Installation Guide:
LINZ6™ Mounting Bracket Model L6BKT3
for Police Push-Bumper
Internet: www.whelen.com
Sales e-mail: autosale@whelen.com
Canadian Sales e-mail: autocan@whelen.com
Customer Service e-mail: custserv@whelen.com
Installation and Wiring:
1. Secure the lighthead (with
gasket) to the mounting
bracket.
2. Using the bracket as a
template, mark the 2
mounting hole locations onto
the mounting surface.
3. Drill two 9/32” diameter
mounting holes into the
mounting surface (in the
locations marked off in step
2) and secure the bracket
with the supplied 1/4 - 20 X
3/4” Hex Head Metal Screws.
4. Extend the lighthead wires to
their connections and refer to the lighthead manual for fusing
and operation.
IMPORTANT! It is the responsibility of the installation technician to
make sure that the installation and operation of this product will not
interfere with or compromise the operation or efficiency of any
vehicle equipment!
Automotive: Lightheads
©2009 Whelen Engineering Company Inc.
Form No.14299 (051209)
6 - 32 X 5/16 ELASTIC
STOP NUT (QTY 2)
BRACKET
(QTY 1)
GASKET
(QTY 1)
LINZ6™
(not
included)
6-32X3/4
PPHMS
(QTY 2)
IMPORTANT! Before returning the vehicle to active service, visually
confirm the proper operation of this product, as well as all vehicle
components/equipment
1/4 - 20 x 3/4"
HEX HEAD
METAL SCREW
(QTY 2)
1/4 - 20 ELASTIC
STOP NUT (QTY 2)
PER
M
SH-BU
L6BKT3
PU
46° Push-Bumper
Bracket
For warranty information regarding this product, visit www.whelen.com/warranty
®
ENGINEERING COMPANY INC.
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Fax: (860) 526-4078
Installation and Wiring:
1. Secure the lighthead (with
gasket) to the mounting
bracket.
2. Using the bracket as a
template, mark the 2
mounting hole locations onto
the mounting surface.
3. Drill two 9/32” diameter
mounting holes into the
mounting surface (in the
locations marked off in step
2) and secure the bracket
with the supplied 1/4 - 20 X
3/4” Hex Head Metal Screws.
4. Extend the lighthead wires to
their connections and refer to the lighthead manual for fusing
and operation.
IMPORTANT! It is the responsibility of the installation technician to
make sure that the installation and operation of this product will not
interfere with or compromise the operation or efficiency of any
vehicle equipment!
6 - 32 X 5/16 ELASTIC
STOP NUT (QTY 2)
BRACKET
(QTY 1)
GASKET
(QTY 1)
LINZ6™
(not
included)
6-32X3/4
PPHMS
(QTY 2)
Installation Guide:
LINZ6™ Mounting Bracket Model L6BKT3
for Police Push-Bumper
Internet: www.whelen.com
Sales e-mail: autosale@whelen.com
Canadian Sales e-mail: autocan@whelen.com
Customer Service e-mail: custserv@whelen.com
IMPORTANT! Before returning the vehicle to active service, visually
confirm the proper operation of this product, as well as all vehicle
components/equipment
1/4 - 20 x 3/4"
HEX HEAD
METAL SCREW
(QTY 2)
1/4 - 20 ELASTIC
STOP NUT (QTY 2)
PER
UM
SH-B
L6BKT3
46° Push-Bumper
Bracket
PU
Automotive: Lightheads
©2009 Whelen Engineering Company Inc.
Form No.14299 (051209)
For warranty information regarding this product, visit www.whelen.com/warranty
Page 1
Loading...