Whelen IONGROM User Manual

®

ENGINEERING COMPANY INC.

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: [phone]

Fax: [phone]

Fig.1 Fig.2

4.375

1.25
R .500

Fig.4 Fig.5Fig.3

1.375"
(Min.)

Installation Guide:

ION™ Lighthead Body Grommet

Internet: www.whelen.com
Sales e-mail: [e-mail]
Canadian Sales e-mail: [e-mail]
Customer Service e-mail: [e-mail]

Installation:

1. Select an appropriate mounting surface (.187
max. thickness). Note that this installation
requires a minimum 1.375” clearance behind
the proposed mounting surface.

2. Cut a hole in the mounting surface using the
dimensions shown in Fig.1. Deburr this
opening before continuing.

3. Insert the body grommet into the opening so
that it fully engages the mounting surface
(Figs. 2, 3 & 4).

4. Feed the ION™ wires into the grommet and
through the opening in the rear. Insert the
ION™ lighthead into the body grommet until
it is fully seated and properly retained (Fig.5).

5. Refer to the information included with the
ION™ lighthead for wiring details.

Automotive: Lightheads

©2011 Whelen Engineering Company Inc.
Form No.14523 (072811)

ENGINEERING COMPANY INC.

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: [phone]

Fax: [phone]

Fig.1 Fig.2

4.375

1.25
R .500

For warranty information regarding this product, visit www.whelen.com/warranty

®

Installation Guide:

ION™ Lighthead Body Grommet

Internet: www.whelen.com
Sales e-mail: [e-mail]
Canadian Sales e-mail: [e-mail]
Customer Service e-mail: [e-mail]

Installation:

1. Select an appropriate mounting surface (.187
max. thickness). Note that this installation
requires a minimum 1.375” clearance behind
the proposed mounting surface.

2. Cut a hole in the mounting surface using the
dimensions shown in Fig.1. Deburr this
opening before continuing.

Fig.4 Fig.5Fig.3

1.375"
(Min.)

3. Insert the body grommet into the opening so
that it fully engages the mounting surface
(Figs. 2, 3 & 4).

4. Feed the ION™ wires into the grommet and
through the opening in the rear. Insert the
ION™ lighthead into the body grommet until
it is fully seated and properly retained (Fig.5).

5. Refer to the information included with the
ION™ lighthead for wiring details.

Automotive: Lightheads

©2011 Whelen Engineering Company Inc.
Form No.14523 (072811)

Page 1

For warranty information regarding this product, visit www.whelen.com/warranty