Series Colored Lens Strobe Appliances: Strobes, Horns Strobes, Speaker
Strobes and Multitone Strobes with Amber, Blue, Green or Red Lens
Description:
Wheelock colored lens strobe notification appliances - strobes,
horn strobes*, speaker strobes, and multi-tone strobes - are built
with the same high quality circuits and parts used in the Cooper
Wheelock life safety strobes and speakers, and are available
with clear, amber or blue lenses, with other colors available
through special order. The colored lens strobe products are
listed under UL Standard 1638 for general signaling and the
amber lenses been tested to meet UL 1971 light distribution.
These appliances are suitable for indoor applications, with
specific models available for outdoor and weatherproof
applications. The indoor models can be wall or ceiling mounted
(model dependent) to standard electrical boxes or to Wheelock’s
surface mount boxes. The outdoor models can be wall mounted
to standard electrical boxes or to Wheelock’s surface mount
boxes. The RSS models have an integrated strobe mounting
plate that can be mounted to standard electrical boxes or to
Wheelock’s surface mount boxes.
The strobes have been tested to operate from 16 to 33 vdc
(using filtered or FWR voltage). Intensity options for these
models include multi-candela models with four field selectable
settings of 15, 30, 75, and 95cd. High ceiling models can be
field selectable for 115 or 177 cd.
Audible strobe appliances can be field set to provide either
High (HI) dBA, Medium (MED) dBA or Low (LO) dBA sound
output. Speaker strobes have field selectable input voltage of
25/70 VRMS and field selectable taps of 1/8, 1/4, 1/2, 1 and 2
watts. The Series E70-24MCC and E90-24MCC Multi-Candela
provides four selectable light output intensities in one unit and
incorporate a Speaker Mounting Plate attached to the speaker
for ease of installation. Weatherproof speaker strobes have field
selectable taps of 1/8, 1/4, 1/2, 1, 2, 4, and 8 watts.
All inputs are compatible with standard supervision of circuit
wiring by an FACP and provide a synchronized strobe appliance
when used in conjunction with a Sync Module (SM), Dual Sync
Module (DSM) or Wheelock power supplies with patented sync
protocol.
Features:
• Approvals include: UL 1638
• Amber Lenses have been tested to meet UL 1971 light
distribution
• Choice of strobe lens colors – amber, blue, red (some
models or by special order)
• Field selectable candela settings of 15/30/75/95cd or high
intensity models with 115/177cd settings
• Indoor 24VDC models with UL “Regulated Voltage” at 16-33
VDC using filtered DC or unfiltered FWR input voltage
• Strobes can be synchronized with Wheelock’s SM or DSM
sync modules or SAFEPATHTM4 power supplies
• Combination speaker/strobes available for voice messages
with visual alerting
• Mount to standard electrical boxes
• High quality designs from the leader in fire notification
alarms
Applications:
The Wheelock colored lens strobe products are designed for
effective alerting of employees or personnel in industrial, military
or government applications. They are ideal for Mass Notification
systems and for emergency, warning or trouble notification in
many industrial operations.
Other Wheelock signaling products can be provided with colored
lens strobes - contact Customer Service for availability.
* NOTE: Horn strobes incorporates a temporal pattern (specified by
ANSI/NFPA for standard emergency evacuation signaling.) The temporal pattern should be used only for fire evacuation signaling and not for
any other purpose.
S5391
NOTE: All CAUTIONS and WARNINGS are identified by the symbol. All warnings are printed in bold capital letters.
WARNING: PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY
BEFORE USING, SPECIFYING OR APPLYING THIS PRODUCT. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS,
CAUTIONS OR WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND/OR OPERATION OF THESE
PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR
DEATH TO YOU AND/OR OTHERS.
General Notes:
• Strobes are designed to flash at 1 flash per second minimum over the Regulated Voltage Range.
• Products are listed for indoor use with a temperature range of 32ºF to 120ºF (0ºC to 49ºC) and maximuim humidity of 93% (± 2%).
• Weatherproof products are listed for use with a temperature range of -31ºF to 150ºF (-35ºC to 66ºC) and maximum humidity of 95% RH.
Note 1: Candela ratings in the above table are per UL 1971 and are based on clear lenses. Models with 15/30/75/95 have 4 field-selectable candela
settings, and models with 115/177 have 2 field-selectable candela settings. Intensity ratings are for clear lens – derate approximately 25% for amber,
55% for green, 70% for blue lenses, and 80% for red lenses.
Note 2: 15 candela models provide 15cd per UL 1971 and 75cd on axis per UL 1638.
Note 3: 30 candela weatherproof models provide 30cd per UL 1971 and 75 candela on axis at -31ºF and 185 candela on axis at 77ºF per UL 1638.
Note 4: 115/177 candela weatherproof models provide 115/177cd per UL 1971 and 50/75cd at -31ºF per UL 1638 (with UL 1971 light dispesion).
Note 5: Appliances are available with Special Wording (i.e. ALERT) to meet UFC requirements. Contact Customer Service for more information.
* UL Pending
Slow Whoop500-1200Hz Sweep (4.0 Sec. ON/0.5 Sec OFF/Repeat)0.0980.037 0.142 0.035
Siren600-1200Hz Sweep (1.0 Sec. ON/Repeat)0.104 0.036 0.1520.03
HI/LO1000/800 Hz (0.25 Sec. ON/Alternate)0.057 0.025 0.114 0.026
For details using SM or DSM Sync Modules refer to data sheet S3000 or Installation Instructions P83123 for SM and P83177 for DSM. For wiring information on the power supply refer to Installation Instructions P84662 for PS-24-8MC.
Wheelock products must be used within their published specifications and must be PROPERLY specified, applied, installed, operated, maintained and
operationally tested in accordance with their installation instructions at the time of installation and at least twice a year or more often and in accordance
with local, state and federal codes, regulations and laws. Specification, application, installation, operation, maintenance and testing must be performed by
qualified personnel for proper operation in accordance with all of the latest National Fire Protection Association (NFPA), Underwriters’ Laboratories (UL),
National Electrical Code (NEC), Occupational Safety and Health Administration (OSHA), local, state, county, province, district, federal and other applicable
building and fire standards, guidelines, regulations, laws and codes including, but not limited to, all appendices and amendments and the requirements of
the local authority having jurisdiction (AHJ).
Voltage
(VRMS)
Reverberant dBA at 10 Feet
Per UL 1480 (Rated Watts)
1/8W1/4W 1/2W 1W 2W 4W 8W
Horn Setting Volume16.0VDC 24.0VDC 33.0VDC
Low869092
Continuous Medium919598
High9599101
Low869092
Code 3 Medium919598
High9599101
24VDC12VDC
HISTDHISTD
ASX-24MCC dBA Sound Output
Anechoic dBA at 10 Feet
Architects and Engineers Specifications
+
-
+
-
+
-
FROM
PRECEDING
APPLIANCE, SYNC
MODULE, POWER
SUPPLY OR FACP
TO NEXT
APPLIANCE
OR EOLR
EOLR
+
-
SM
F
A
C
P
STROBE
Audible
STROBE
+
-
Audible
Strobe
NAC
Circuit
RSS
RSS
DSM
+ OUT 2
+OUT 1
+ IN 1
+ IN 2
MINUS 1
MINUS 2
+
-
-
+
SYNC
AUDIBLE
STROBE
NAC
CIRCUIT
OUT
STROBE
NAC
CIRCUIT
RETURN
FACP
RSSRSS
RSS
RSS
RSSRSS
F
A
C
P
DSM #3
Strobe NAC Cir.
DSM #2
DSM #1
Strobe NAC Cir.
Strobe NAC Cir.
Sync
Sync
Sync
+
-
+
+
-
-
DSM Interconnecting wiring shown. Maximum of
twenty (20)
RSSRSS
RSS
RSS
RSS
RSS
The audible/visual notification appliances shall be Wheelock colored lens strobe products or approved equals. These
appliances shall be listed under UL Standard 1638. The amber lens shall be tested to meet UL 1971 light distribution.
The strobe appliances shall produce a minimum flash rate of 60 flashes per minute (1 flash per second) over the Regulated
Voltage Range of 16 to 33 VDC and shall incorporate a Xenon flash tube enclosed in a rugged lexan lens. Strobe intensity
shall be 75 candela minimum or shall be field selectable for 4 intensity levels The strobes shall operate over an extended
temperature range of 32ºF to 120ºF (0ºC to 49ºC) and shall be listed for maximum humidity of 93%RH. Weatherproof
strobe appliances shall operate over an extended temperature range of -31°F to +150°F (-35°C to +66°C) and maximum
humidity of 95% RH.
Horn strobes shall be able to produce a continuous output or a temporal code-3 output that can be synchronized. The
horns shall have 3 sound level settings of 90, 95, and 99 dBA
Speaker strobes shall be able to have field selectable input voltage of 25/70 VRMS and field selectable taps of 1/8, 1/4,
1/2, 1 and 2 watts. Weatherproof speakers shall have field selectable taps of 1/8, 1/4, 1/2, 1, 2, 4, and 8 watts.
NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Wheelock, Inc. standard terms and conditions.
Wiring Diagrams
#
SERIES RSS APPLIANCE
SERIES RSS APPLIANCES SYNCHRONIZED WITH DSM
MODULE SINGLE CLASS “A” NAC CIRCUIT
SERIES RSS APPLIANCE SYNCHRONIZED WITH SM
MODULE SINGLE CLASS “B” NAC CIRCUIT
SERIES RSS APPLIANCES SYNCHRONIZED
WITH MULTIPLE DSM MODULES