Wharfedale Pro XO-206X User Manual
www.wharfedalepro.com
XO-Series Crossovers
XO-Series Crossovers
OPERATING MANUAL AND USER GUIDE
XO-204
●
XO-206
●
XO-204X
●
XO-206X
XO-series User Manual.indd 1 2009-8-11 16:43:45
OPERATING MANUAL AND USER GUIDE
1
TABLE OF CONTENTS
1. Important Warnings & Safety Instructions ..................................................................................... 2
2. Introduction/About the XO-Series Crossovers...............................................................................3
3. Features ........................................................................................................................................4
4. Block Diagram ............................................................................................................................... 5
5. Setting up/Connections/Wiring ...................................................................................................... 6
6. Tuning The Room/crossover Adjustments ......................................................................................7
7. Specications ................................................................................................................................8
8. Dimensional Drawings ...................................................................................................................9
9. Warranty ......................................................................................................................................10
XO-series User Manual.indd 2 2009-8-11 16:43:45
XO
2
IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
1. READ ALL INSTRUCTIONS – carefully and become familiar with the features and functions of
these products before operating them.
2. RET
AIN THESE INSTRUCTIONS – for future reference.
3. COMPLY WITH ALL WARNINGS – All warnings and instructions for this product should be
adhered to.
4. U
SE WITH AMPLIFIERS – In order to avoid damage to drivers and other equipment, it is
advisable to establish and follow a routine for powering up and powering down a sound system.
With all system components connected, turn on source equipment (mixers, signal processors,
record and playback units, etc.) BEFORE powering up amplifiers. Transient voltages from
powering up source equipment can damage speakers if amplifiers are already turned on.
Make sure that amplier volumes are set to their minimum settings and power up any system
amplifiers LAST. It is recommended that all system components be allowed to stabilize for
several seconds before any source signals are introduced or level setting adjustments are
made. Similarly, when shutting systems down, turn all ampliers off rst, before powering down
any other system components.
5.
SER
VICE – There are no user serviceable parts inside this product. Users should not attempt to
service this product. Warranty nullication could result if this is attempted.
XO-series User Manual.indd 3 2009-8-11 16:43:45
OPERATING MANUAL AND USER GUIDE
3
The Wharfedale Pro XO-Series Crossovers are the result of many years of experience in the use,
design and manufacture of professional sound reinforcement products. We take great pride in
engineering and building every Wharfedale Pro product and wish to thank you for entrusting us with
your sound.
From the time Gilbert Briggs built his first loudspeaker in 1932, to the present, Wharfedale
Professional products have maintained the same standard of quality in components, workmanship
and performance. Wharfedale are one of a few present day manufacturers that design, engineer
and build all of their own electronics.
Please take a few minutes to read this manual completely in order to ensure that you get the most
out of your system.
INTRODUCTION
The XO-Series consists of 4 models: XO-204, XO-204X, XO-206 & XO-206X, all of which are high
quality active analogue crossovers.
The XO-204 provides 2 individual outputs suitable for bi-amp application whilst the XO-206 has 3
individual outputs and is suitable for tri-amp application. The XO-204X & XO-206X models feature
all inputs and outputs in balanced XLR format whilst the XO-204 & XO-206 models feature all inputs
and outputs in balanced/unbalanced TRS format. A Mono Sub output enables you to incorporate a
mono subwoofer into your stereo system with ease.
The XO-Series employ analogue circuitry throughout with 24dB / octave Linkwitz Reilly lters. All
models are true stereo units with 2 channels and global controls to retain the stereo imaging of the
programme material.
The XO-Series crossovers are accurate, high quality, frequency dividing networks, allowing you to
tailor your system to make it sound great. With low distortion and exible features, these crossovers
are the right tools to bring to the show.
The XO-Series has many user-friendly features. These easy to adjust and use features include:
variable input gain and frequency select controls, Subwoofer output, balanced and unbalanced
input and output connectors, phase switch, mute switch, and a soft limit switch.
ABOUT THE XO-Series CROSSOVERS
XO-series User Manual.indd 4 2009-8-11 16:43:45
Loading...