Wharfedale Pro Typhon-AX12-BT, Typhon-AX12 User Manual
WWW.WHARFEDALEPRO.COM
POWERFUL | PORTABLE | VERSATILE PA
TYPHON-AX12
TYPHON-AX12-BT
Wharfedale Pro Typhon Series User Manual
1
1. IMPORTANT SAFETY INSTRUCTIONS
2
2. TYPHON - Pronounced - “TYF—ON”
In ancient mythology, Typhon was a giant who brought fear to his enemies. From a similar era
to the Titans, it is said that the God Typhon had the power to create and control massive wind
tornadoes in his battles. Mythology also often refers to him as being invincible.
Power, control and “invincibility” are all features which Typhon active loudspeakers
have been designed around.
Two models are available. Typhon-AX12 - a 12” 2-way 720w Continuous active loudspeaker and an aptX Bluetooth enabled brother - the Typhon-AX12-BT.
A polypropylene cabinet design with a full frontal steel grille houses the most advanced
active loudspeaker ever created by Wharfedale Pro. This injection moulded cabinet is
carefully engineered to feature 5 carry handles making transportation easy and well
balanced.
Advanced internal DSP algorithms generate a sound stage which surpasses the dimensions of the cabinet. The two separate Class D power amps (600w RMS for the LF and
120w RMS for the HF) deliver huge output power while keeping the overall weight to
minimum. The efficiency of the amplifier stage means that Typhon uses convection
cooling - resulting in a more reliable product with quieter operation.
Custom Wharfedale Pro transducers have been selected for Typhon. The custom compression driver features a 1.75” voice coil. This is coupled to a 100° x 80° waveguide for
smooth HF dispersion. The custom Wharfedale Pro 12” LF transducer has a newly
designed ferrite core, uses flat coil windings to aid cooling, and features a moisture
rejecting cone material which allows Typhon to be used in damp or humid conditions.
The Typhon-AX12-BT features aptX Bluetooth input connectivity and stereo linking
which makes setup with mobile devices simple and cable free.
Features
• 720w continuous (1440w peak)
• Full frontal steel grilles with inner cloth protection
• Top and bottom practical handles
• Bluetooth model available - Typhon-AX12-BT
• Bi-amplified with Class D amps
• 4 position DSP
• 9 x M8 rigging points
• 2.5” LF transducer voice coil with flat windings
• 1.75” HF compression driver voice coil
• 100° x 80° dispersion Hybrid Symmetry waveguide
3
3. IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
UNDER NO CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR OTHERWISE MOUNT THESE
SPEAKERS UNLESS YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY RELEVANT
LOCAL, STATE AND NATIONAL AUTHORITIES. ALL RELEVANT SAFETY REGULATIONS MUST
BE FOLLOWED. IF YOU ARE NOT PROPERLY QUALIFIED OR DO NOT KNOW OF PERTINENT
REGULATIONS, CONSULT QUALIFIED PERSONNEL FOR ADVICE.
1. READ ALL INSTRUCTIONS – carefully and become familiar with the features and
func tions of these products before operating them.
2. RETAIN THESE INSTRUCTIONS – for future reference.
3. COMPLY WITH ALL WARNINGS – All warnings and instructions for this product
should be adhered to.
4. USE WITH AMPLIFIERS – In order to avoid damage to drivers and other
equipment, it is advisable to establish and follow a routine for powering up and
powering down a sound system. With all system components connected, turn
on source equipment (mixers, signal processors, record and playback units, etc.)
BEFORE powering up amplifiers. Transient voltages from powering up source
equipment can damage speakers if amplifiers are already turned on. Make sure
that amplifier volumes are set to their minimum settings and power up any
system amplifiers LAST. It is recommended that all system components be
allowed to stabilize for several seconds before any source signals are
introduced or level setting adjustments are made. Similarly, when shutting
systems down, turn all amplifiers off first, before powering down any other
system components.
5. CABLES – Do not use shielded or microphone cables for connection between
amplifiers and speakers. Use only approved speaker cables with proper
connectors.
6. CAUTION – These professional loudspeaker systems are capable of generating
very high sound pressure levels. Use care with placement and operation to
avoid exposure to excessive volume levels. Permanent hearing damage can
result when operated to extreme levels.
7. SERVICE – There are no user serviceable parts inside this product. Users should
not attempt to service this product. Warranty nullification could result if this is
attempted.
8. RIGGING - SUSPENDING - MOUNTING - Rigging suspending or mounting of
speaker systems can expose members of the public to serious health risks and
even death.
Loading...