Wharfedale LX-12 User manual

Value, Integrity and Performance
Created from the ground up into the demanding, high performance world of professional audio,Wharfedale Professional enjoys global success with arange of great value, great sounding, and innovative products.The Wharfedale Professional philosophy is simple:Value, Integrity and Performance –VIP.
Since 1932,Wharfedale has been at the forefront of lou dspeaker technology – these seventy years of experience in the design and manufacture of audio systems make Wharfedale Pro products second to none.
We put in a lifetime of experience – you get outalifetime of performance.
EXTENSIVE LX & LX-E SERIES COVER THE HIGH-
PERFORMANCE SPECTRUM
The new LX and LX-E Series of loudspeakers each consist of nine models in total,
comprising five full ranges (with FOH and monitor systems in both 12 inch and 15
inch versions), and four sub bass cabinets (in both 15 inch and 18 inch versions).
Boasting distinctive style and features, these high powered, high performance
arrayable tr apezoidal enclosures are capable of extremely high sound pressure
levels and exceptional sonic quality with wide dynamic range and bandwidth.
Both ser ies have been developed with exceptional features including the large
elliptical Wave Guide horn, the use of cast-fame , large voice coil woofers for
sustained output capability and minimal power compression under extended
high-power use, and the ProTech™ protection system designed to protect the
HF unit, just tonameafew.
In creating the LX Ser ies, we set some basic parameter s to design a range that
delivers without exception the performance, features and quality that our
customers demand. We also kept it simple; the LX-E range has a ‘systems’
approach, a range of models that can be used together to provide solutions for
nearly ever y audio challenge .
NEW LOOK, DISTINCTIVE FEATURES, HIGH STANDARD,
GREAT POWER AND MORE CHOICES.
Elliptical Wave Guide Horn (1.4” Exit)
In compar ison to a conventional rectangular hor n, the elliptical
Wave Guide offers superior control over HF coverage ,
with reduced distor tion, greater output and smoother
frequency response. The elliptical shape means that
there are no corners or parallel surfaces to distort,
diffract or reflect the sound – therefore the output is
smoother, cleaner and more consistent. Again, due to
the elliptical shape, mid to high frequencies are
diffused more efficiently.
Titanium 50mm Diaphragm, 1.4” Exit Compression Driver
The elliptical Wave Guide horn is coupled with a
50mm (2”) true compression driver designed
specially for the LX and LX-E Series. This titanium
diaphragm dr iver features a 1200g-magnet with a
35mm (1.4”) exit for br illiant, natur al HF
reproduction.
Large Wave Guide
elliptical horn provides
superior control over
HF coverage
Large magnet structures
and tight construction
tolerances give accuracy,
high efficiency and
reliability
ProTech™ Driver Overload Protection System
Understanding that sound systems are often asked to perform beyond their original design
parameters, we have designed a smooth, progressive dynamic limiter/protection system that
is carefully tailored to each model. Overloads are limited and drivers are protected against
long term transient or peak conditions. The ProTech™ system progressively converts excess
power to heat and triggers a reduction in power to the HF drive. When the overload
condition is removed the system returns seamlessly to normal operation.
Sophisticated Crossovers Design
Each crossover in the LX and LX-E Series is built using the highest quality components
and designed specifically for that system, enabling smooth power and frequency
response control through crossover region. The LX-15B and LX-18B feature integral
two-way networ ks that allow a four-box system to be powered by one amplifier.
Tr a pezoidal, Plywood and Composite Construction
The LX-E’s cabinet is constructed from plywood on all critical surfaces (where durability
is impor tant) and wood composite where resonances need to be kept to a minimum.
The trapezoidal shape further improves sonic accuracy by significantly reducing inter nal
flutter echoes and standing wave resonances that are often apparent in rectangular
shape cabinets.
Mounting points:
For maximum flexibility when installing, we have designed two specific models which
feature 12 x M10 rigging points allowing the cabinets to be flown or ar rayed. The
LX-12E and LX-15E are fitted with these flying inser ts.
Protective Finish
The LX is all finished using a tough, black industr ial carpet offering exceptional
protection and durability for life on the road. The LX-E is coated with Duraguard™, an
abrasion resistant paint that creates a protective ‘skin’ around the cabinet. Both finishes
contribute to the overall safety in the set up and use.
Strong Grille, Square Handles and Castors
In order to provide maximum protection to the inter nal components of the
loudspeakers, the front grilles are full steel with 1.5mm thick. The square handles design
allows the cabinets to be gripped securely and comfor tably, therefore making them easy
to move. Built-in castors are available on some larger units for ease of transportation.
High protective
Duraguard™
coating
Durable black
carpet covering
Heavy duty
protective
steel grille
Built-in castors
for larger
enclosures
Comfortable square handles
Secure
rigging points
Trapezoidal designs allow
more compact arrays and
sonic accuracy
Enclosures of the LX-E
constructed from premium
grade plywood for durability
Loading...
+ 5 hidden pages