Page 1
USER'S MANUAL
HD Ready LCD TV
MODEL:
L1511W-A, L1911W-A
Customer helpline:0845 604 0105
Please read this manual carefully before
using your television and keep this manual
for future reference.
Page 2
Customer helpline:0845 604 0105
Page 3
Customer helpline:0845 604 0105
Page 4
To users:
Thank you for using our LCD-TV.
Before connecting the LCD-TV and turning the power on, please
read this book carefully. Please keep this book for later use. When it
was loss of function by electrostatic shock, please switch the on/off
button for restoring the function.
CONTENT
Safety Notice .......................................................................................
Front Panel Controls.............................................................................
Connection ..........................................................................................
Remote Control Key Functions..............................................................
Remote Control .............................................................................
Installing Batteries............................................................................
Connection Instructions........................................................................
Grounding.........................................................................................
External equipment connections.........................................................
Antenna Connection........................................................................
VGA Input.......................................................................................
YPbPr Input....................................................................................
S-VIDEO Input................................................................................
SCART Input..................................................................................
HDMI Input.....................................................................................
Wall Mounting.................................................................................
Basic Operating Instructions..................................................................
Turn on the LCD-TV............................................................................
Audio Control.....................................................................................
Mute.................................................................................................
Select the TV Channel ........................................................................
Picture Mode......................................................................................
Menu Operations..................................................................................
Picture Menu Options..........................................................................
Audio Menu Options............................................................................
Audio Menu Options Continued............................................................
Function Menu Options........................................................................
Adjust Menu Options..........................................................................
Tuning Menu Options..........................................................................
TELE TEXT..........................................................................................
Troubleshooting Guide.........................................................................
Specifications......................................................................................
PRODUCT GUARANTEE.......................................................................
1
2
3
4
5
5
6
6
6
6
7
7
8
9
9
9
10
10
10
10
11
11
12
12
13
14
15-16
17
18-19
20-21
22
23-24
25
Customer helpline:0845 604 0105
Page 5
Safety Notice Items
To prevent fire or electric shocks please read the instruction before
installing, using and cleaning the television.
l Please read all the instructions before operation;
l Please keep the manual for future reference ;
l Do not use any accessories that are not recommended by the manufacturer:
l Before operation, make sure the operating voltage of this unit is corresponds
with your house electrical supply;
l Do not place the unit on unstable or in dusty and humid places;
l Never put the unit in direct sunlight or near heat sources;
l Allow enough space for proper ventilation;
l Please keep water away from the LCD-TV . If water comes in to contact with
the LCD-TV, disconnect the power cord from the power source, then wipe the
set with a dry soft cloth;
l Do not remove the back cover. If servicing is required , please refer to
customer helpline.
Customer helpline:0845 604 0105
Page 6
Front Panel Controls
Control Panel Function
1. Standby switch
2.SOURCE Select the input signals: TV
3. MENU Press to select the main menu
4. VOL- Volume down / Left orientation to adjust the item in the OSD
VOL+ Volume up / Right orientation to adjust the item/Press to enter
5. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu
6. Power indicator
Illuminates red in standby mode, illuminates green when the display is
turned on
7.Remote Sensor
PC/COMPONENT/HDMI/ /SCART/
S-VIDEO
6
7
SOURCE MENU VOL- VOL+ CH- CH+ POWER
2 3 4 5 1
SOURCE MENU VOL- VOL+ CH- CH+ STANDBY
Customer helpline:0845 604 0105
L1911W-A
L1511W-A
Page 7
COMPONENT Input
Connect a component
video/audio
device to these jacks
VGA Input
Connect to the VGA
15PIN analog output
connector of the PC
display card for PC
display purpose
S-Video Input
Connect S-Video out
from an S-Video device
to the jacks.
Antenna Input
Connect cable or
antenna signals to
the TV, either directly or through your
cable box.
Connection Options
Earphone port
COMPONENT/
SVIDEO /VGA
Audio Input
Connect the PC output
connector from a PC to
the audio input port
SCART
Connect to the DVD/
VCR/broadcasting
receiver or other
equipment
The figure is just for reference, please see the actual product.)
ANT IN
Y
Pr S-VIDEO
TV SCART VGA IN
AUDIO IN
Pb
HDMI
HDMI
Connect to HDMI
output of other
equipment
ANT IN
Y
Pr S-VIDEO
TV SCART VGA IN
AUDIO IN
Pb
HDMI
Customer helpline:0845 604 0105
AC power
switch
(Only available in L1911W-A)
Page 8
Remote Control Key Functions
When using the remote control, aim it
towards the remote sensor on the TV
Stand By
MUTE
Display current input signal information
TV channel number select
Set time to change the TV into the
standby status after a period of preset
time.
NICAM/A2 Stereo select
EXIT
Quick TV channel switch(return to the
last channel)
Volume down/up Left/right orientation to
adjust the item in the OSD
TV channel up/down or select the item
of the menu
Select TV
Select picture mode
PC system select
Select sound mode
Correspond to the differently colored
subjects
Switch to the Teletext with text mode/turn
off Teletext and switch to TV mode
Hold on or off for current page display
Switch to the Teletext with mix mode
Request index page
Change display size
Sub coded page access
Reveal or hidden the hidden words
Press to select the main menu
Auto adjust (PC mode)
PC/COMPONENT/HDMI/ /SCART/
S-VIDEO
While in normal TV mode only, pressing
the button TIME will display the teletext
time in the top right corner for a few
seconds.(only available in teletext mode)
Buttons on the remote control
P+
P-
V- V+
SLEEP DISPLAY MUTE STANDBY
NICAM PC AUTO AD SOURCE
PSM
OK Q.VIEW
MENU
INDEX TEXT
TIME HOLD SIZE REVEAL
SUBCODE MIX
S
SM
Customer helpline:0845 604 0105
Page 9
Remote Control
Installing Batteries
3
2
1
1.Open the cover of the battery compartment at the back of the remote
control.
2.Insert two AA alkaline batteries in the compartment. (plus and minus poles to
respective mark)
3.Replace the cover of the battery compartment.
Precautions
Make sure that there is no
obstacle between the remote
controller and television set.
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Keep the remote controller
away from heat source or
humid area to ensure
effective performance of
the remote controller.
Make sure that two 5# 1.5V alkaline
batteries are loaded. The batteries
must be of the same type. The batteries
must be located properly. The batteries
are not rechargeable. If your TV is to be
stored for a period of time, remove the
batteries from the remote control.
Customer helpline:0845 604 0105
Page 10
Connection Instructions
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connecting it to telephone wires, lightening rods, or gas pipes.
Grounding
External Equipment Connections
Antenna Connection
- Antenna or Cable Service with a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
VHF antenna
UHF antenna
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Be careful not to bend the bronze
wire when connecting the antenna.
To improve picture quality in a poor
signal area, purchase and install a
signal amplifier.
If the antenna needs to be split for two
TV s, install a 2-Way Signal Splitter
in the connections.
If the antenna is not installed properly,
contact your dealer for assistance.
RF coaxial wire (75 ohm)
ANT IN
ANT IN
Note:All cables shown are just for example.
Customer helpline:0845 604 0105
Page 11
Connection Instructions
You can use your LCD-TV as a monitor for your personal computer using a VGA
cable (not supplied).
VGA Input
Connection and use steps:
1.Read the user guide supplied with
your computer and ensure that it has
a VGA connector;
2.Make sure that the power of the LCD
-TV and the PC are off;
3.Connect a D type 15-pin VGA interface
cable ( not supplied ) to the VGA video
interface connector on the PC. Then
connect the other end to the PC video
interface connector on the back of the
LCD-TV.Tighten the screws on the VGA
connectors once they are firmly
connected,connect the audio cable(not
supplied)to the audio input on the back of
your LCD-TV;;
4.Turn on the power of the LCD-TV first ,
and then turn on the power of the PC;
5.Press the SOURCE button to set the video
input mode of the LCD-TV to PC;
6.Check the image on your TV. There may be noise associated with the resolution,
vertical pattern, contrast or brightness in PC mode. If noise is present, change
the PC mode to another resolution, change the refresh rate to another rate or
adjust the brightness and contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card cannot be changed,change the PC graphic
card or consult the manufacturer of the PC graphic card.
VGA IN
Frame frequency (Hz)Line frequency (Khz)
VGA
SVGA
XGA
640*480 31.5KHz 60Hz
800*600 37.9KHz 60Hz
1024*768 48.4KHz 60Hz
Mode Resolution
Note: All above listed are subject to VESA Criteria.
YPbPr Input
How to connect
Connect the DVD video outputs (Y, PB, PR)
to the COMPONENT(Y, Pb, Pr) IN socket on
the TV and connect the DVD audio outputs
to the AUDIO IN jacks on the TV, as shown
in the figure.
NOTE: If your DVD player does not have
component video output,use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the SOURCE button on the remote control to select
Customer helpline:0845 604 0105
Page 12
Connection Instructions
S-VIDEO Input
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are switched off;
.Turn on the power of the LCD-TV first ;
and then turn on the power of the AV
device;
4.Press the SOURCE button to set the video
input mode of the LCD-TV to SVIDEO
mode .
Connection Option 1
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Connection Option 2
1. Connect the audio and S-Video cables
from the VCR's output jacks to the TV
input jacks, as shown in the figure.
2. Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner s manual.)
3
- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV
.
VCR
1
2
COMPONENT (If connected to SVIDEO,select the S-VIDEO external
input source.)
3. Refer to the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the component
input ports as shown below.
Y Pb
Pr
Customer helpline:0845 604 0105
Page 13
Connection Instructions
SCART Input
1.Connect the scart lead from the external device(DVD
players, settop boxes or game consoles, to the TV SCART
socket.
2.Press SOURCE to select SCART mode.
3. Press Play button on external equipment and it should
appear on the screen.
HDMI
HDMI
HDMI Input
HDMI Devices
Connect the cable from the HDMI devices
to the TV HDMI, as shown in the figure.
How to use
1. Select the HDMI source by using the SOURCE
button on the remote control.
2. Operate the corresponding external equipment.
Refer to external equipment operating guide.
SCART
External equipment
Note: The audio cable included with the TV should be used when connected with PC/
COMPONENT/S-VIDEO.
TV
HDMI Devices
Customer helpline:0845 604 0105
Wall Mounting
Use 4 machine screws(M4x8mm not included) to mount
the TV on the Bracket(not included)
For the Wall Bracket-Refer to the user instructions
supplied with the wall bracket(not included)
Page 14
Basic Operating Instructions
Turn on the LCD-TV
When the STANDBYbutton on the remote control is pressed
and the LCD-TV is turned on, the indicator light on the front of
the LCD-TV changes from red to green. When the LCD-TV is
turned off using the STANDBY button, the LCD-TVwill go into
standby mode and the indicator light turns red.
Each time you press the SOURCE button, PC, COMPONENT,HDMI, TV ,SCART,
S-VIDEO, will appear on the screen .
Audio Control
1.Press the V+ button to increase the volume.
2.Press the V- button to decrease the volume.
Mute
1.Press the MUTE button to mute the sound temporarily. A mute icon
appears on the screen.
2.Press the MUTE button again or V+ to restore the sound.
The mute icon disappears.
P+
P-
V- V+
SLEEP DISPLAY MUTE STANDBY
NICAM PC AUTO AD SOURCE
PSM .SSM
OK Q.VIEW
MENU
INDEX TEXT
TIME HOLD SIZE REVEAL
SUBCODE MIX
The display will appear on the screen when the TV is turned on for the first time:
AUTO SEARCH
UNITED KINGDOM
NO
Press V+/- to adjust the region and P+/- to select the YES and MENU to confirm.
All channels will be stored after the process.
YES
Customer helpline:0845 604 0105
Page 15
Basic Operating Instructions
Select the TV Channel
You can use the number keys on the remote control to directly select TV
channels.
The LCD-TV can store up to 100 channels , and you can press the keys on the
remote control or on the panel to make a selection.
Picture Mode
Press PSM button on the remote control for menu display . For desired mode as
follows:
PERSONAL STANDARD MILD FRESH
1.Press the relevant key on the remote control if you want to choose any channel
from 0 to 9. for example: if you want to choose channel 8, just press the key
number 0 and 8.
Note: You must press 0 first and then the other numbers from 0 to 9 if you want
to choose channels from 0 to 9)
2.If you want to choose a channel bigger than 9, please enter the two digits of the
channel number you want to watch within 3 seconds. for example: select
channel 16
Customer helpline:0845 604 0105
Page 16
Menu Operations
Picture Menu Options
1. Press MENU button to display the main menu, and V+/V-to select the
main menu .
2. Press P+/P- to scroll through the
3. Press V+/V- buttons to make changes to the parameters
4. Press the OK button to exit the menu
options
Picture quality can be adjusted for any input separately .
The picture quality on the screen can be adjusted as follows:
1. Press MENU button and V+/V- until the following menu appears
on the screen.
2. Press P+/P- button to enter the picture menu and to go up and down to
select the desired option .
PC MENU
TV/S-VIDEO/SCART MENU
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
NOISE REDUCTION
COLOUR
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOUR TEMP.
30
30
30
2
COLD
50
50
2
50
OFF
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
H.POSITION
V.POSITION
COLOUR
30
30
30
2
30
HDMI/COMPONENT MENU
0
0
Customer helpline:0845 604 0105
Page 17
Menu Operations
3.Press V+/V- button to increase and decrease the level to match your preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Function:
BRIGHTNESS : By increasing the level, it will add more light to dark parts of the
picture and by decreasing the level ,it will add more dark to light parts of the
picture.
CONTRAST : The image becomes higher as the number increase.
SHARPNESS : By increasing the level, it will show cleaner and clearer images
and by decreasing the level, it will make picture smoother.
: Press V+/V- to adjust the colour
NOISE REDUCTION: Adjust the quality of the picture by selecting OFF,LOW,
MID,HIGH.
COLOUR TEMP. : Press to select the colour temperature from WARM/NORMAL/
COLD .
H.POSITION : Picture horizontal adjust
V.POSITION : Picture vertical position adjust .
COLOUR
Picture Menu Options Continued
Audio Menu Options
Sound can be adjusted as follows:
1. Press MENU and V+/V- button until the following menu appears on
the screen
VOLUME
BALANCE
BASS
TREBLE
AUDIO MODE
AVL
AUDIO
50
50
50
50
VOICE
OFF
Customer helpline:0845 604 0105
Page 18
Menu Operations
Audio Menu Options Continued
2. Press P+/P- button to enter the audio menu and to go up and down to
select the desired option .
3.Press V+/V- button to increase and decrease the level to match your preference .
4. Repeat step 2 and step 3 until desired sound quality has been achieved ..
Function :
VOLUME : Adjust the volume of your TV
BALANCE : Adjust the balance of the audio output from left to right . When
indication value of balance increases towards 100 , sound of the left speaker
becomes weaker . When indication value of balance decreases towards 0 ,
sound of the right speaker become weaker .
BASS : Adjust the bass of the sound . Can only be adjust under PERSONAL mode .
TREBLE : Adjust the treble of the sound . Can only be adjust under PERSONAL
mode .
AUDIO MODE : Press V+/V- to select among PERSONAL, VOICE, MUSIC and
THEATRE .
AVL: Automatic Volume Limit Control reduces the effect of the large volume by
the same volume of all the channels .
Customer helpline:0845 604 0105
Page 19
Menu Operations
Function Menu Options
Menu Language Selection:
The menus can be shown on the screen in the selected language. First select
your language.
1.
2. Press P+/P- button to select LANGUAGE.
3. Press V+/V- button to select your desired language.
From this point on, the on-screen menus will be shown in the language of your
choice.
Press MENU and V+/V- button until the following menu appears on the screen
INPUT SOURCE TV
LANGUAGE ENGLISH
TXT LANGUAGE PAN EUROPEAN
TXT EAST/WEST EAST
BLUE SCREEN ON
DISPLAY MODE 4:3
RESET
CHILD LOCK
FUNCTION
1. Press MENU button and V+/V- until the following menu appears
on the screen.
2. Press P+/P- button to enter the function menu and to go up and down to
select the desired option .
3.Press V+/V- button to increase and decrease the level to match your
preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Functions:
1. INPUT SOURCE :
2. TXT LANGUAGE: To switch the teletext languages.
3. TXT EAST/WEST: To select EAST or WEST
TV, PC,S-VIDEO, SCART , COMPONENT, HDMI
INPUT SOURCE TV
LANGUAGE ENGLISH
TXT LANGUAGE PAN EUROPEAN
TXT EAST/WEST EAST
BLUE SCREEN ON
DISPLAY MODE 4:3
RESET
CHILD LOCK
FUNCTION
Customer helpline:0845 604 0105
Page 20
Menu Operations
Function Menu Options Continued
4. : To select the display mode between and
5.BLUE SCREEN:
6. RESET : Press V+ to reset the settings to the factory default .
7. CHILD LOCK: Press V+ to enter it and the following appears on the screen:
DISPLAY MODE 4:3, 16:9 FULL
SCREEN
To set On, the screen will be in blue screen after 3 seconds
if there is no signal.
If password is correctly entered, the CHILD LOCK menu will be entered. If the
password is not correctly entered, you will be required to re-enter the password
and the cursor will stay at the first place. CHILD LOCK menu is as follows:
(The initial password is 0000. )
PASSWORD:
- - - -
PASSWORD
CHILD LOCK OFF
CHILD LOCK
PASSWORD: The password can be changed. Press P+/- to select PASSWORD
and V+ to enter. The screen will display NEW PW: ----, then enter the new
password and the screen display CONFIRM PW: ----, if the same password
is entered correctly twice, the old password will be changed.
CHILD LOCK: Press P+/- button to select it. Press V+/- button to set on or off mode.
If lock on mode is set, child lock is inactivated automatically. In such case, buttons
on the television is useless and only buttons on remote control can be used, if child
lock button(button on the television) is pressed, the screen will display
. The child lock mode can be resumed by entering lock set menu,
set child lock on .
CHILD LOCK
Customer helpline:0845 604 0105
Page 21
Menu Operations
Adjust Menu Options
1. Press MENU and V+/V- button until the following menu appears on the
screen
ADJUST
AUTO SYNC.
PHASE
CLOCK
H. POSITION
V. POSITION
Note: This menu only appears in PC mode .
2. Press P+/P- button to enter the adjust menu and to go up and down to
select the desired option
3.Press V+/V- button to increase and decrease the level to match your preference ..
4. Repeat step 2 and step 3 until desired quality has been achieved .
Functions:
AUTO SYNC : Is opted for adjustment of picture location frequency and phase
parameters .
50
50
50
50
PHASE : Removes any horizontal distortion and clears or sharpness the displayed
characters .
CLOCK : Adjust the TFT-LCD to match the PC input source
H.POSITION : Picture horizontal adjust
V.POSITION : Picture vertical position adjust .
Customer helpline:0845 604 0105
Page 22
Menu Operations
Tuning Menu Options
1. Press MENU and V+/V- button until the following menu appears on the
screen
Note: This menu only appears in TV mode .
2. Press P+/P- button to enter the tuning menu and to go up and down to
select the desired option .
3.Press V+/V- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved ..
Functions:
1.TUNING PROGRAM: Press V+ to enter it and the TUNING PROGRAM menu
appears:
CHANNEL : Press V+/V- to change the TV channel .
EDIT NAME: Press V+ to enter it , then press V+/- to select the position you want to
edit and press P+/- to input the emblem such as character and so on.(There are 8
position for you to edit totally)
COLOUR SYSTEM : Select the TV colour system from AUTO,PAL,SECAM.
SOUND SYSTEM : Select the TV standard system from DK,I,L/L',BG
SKIP : If you want to skip a channel , press V+/V- to select ON , and this
channel will be skip next time when you press P+/P- . But you can press
digits button to select the channel . If you want to restore the channel , select OFF
TUNING PROGRAM
COUNTRY UNITED KINGDOM
AUTO SEARCH
TUNING
CHANNEL 1
EDIT NAME
COLOUR SYSTEM AUTO
SOUND SYSTEM DK
SKIP OFF
AFC ON
FINE TUNE
EXCHANGE
MANUAL SEARCH
TUNING PROGRAM
143.65MHZ
Customer helpline:0845 604 0105
Page 23
Menu Operations
EXCHANGE : Press V+ to display the menu as follows:
Press P+/- to select the item and then V+/- to adjust the channel and V+
to confirm.( For example: press P+/- to select FROM item, and then press
V+/- to adjust the channel number to 1; then Press P+/- to select TO item,
and V+/- to adjust the channel number to 9; press P+/- to select EXCHANGE item,
and then V+ to confirm. The two channels will be exchanged)
MANUAL SEARCH : Press V+ to start to search the channel . The following menu
will display on the screen:
Press V+/- to select UP or DOWN, and then press MENU to confirm.
(If you select DOWN, the search will search the lower frequency channel and UP
will search the higher frequency channel)
2.COUNTRY: Press V+/- to select the country .
3. AUTO SEARCH : Auto search and save the channel .Press the V+ button to
start to search the channel and the following menu will appears on the screen:
Press V+/- to select YES or NO, and menu to confirm.
You could press MENU to stop the search.
NOTE: If you want to search the channels in L or L' system, you need to set the sound
system to L in OSD
FROM : 1
TO : 9
EXCHANGE
EXCHANGE
MANUAL SEARCH?
UPDOWN
AUTO SEARCH?
YESNO
.
AFC : Auto frequence control . Select ON to improve the image quality .
FINE TUNE :Press P+/P- to select FINE TUNE item in menu . Then , press V+/V-
button to adjust and improve the image quality .
Tuning Menu Options Continued
Customer helpline:0845 604 0105
Page 24
TELETEXT
SIZE Button
Press SIZE button to change display size : normal large top large bottom
normal
REVEAL Button
Press REVEAL to reveal hidden words e.g. Quiz page answers . Press again
to hide.
Red/Green/ Yellow/Cyan Buttons
These four buttons correspond to the differently colored subjects .
HOLD Button
Press HOLD button to remain the Teletext page when viewing multi-page
information .
INDEX Button
Press INDEX button to return to the main index page .
Depending on the way information is transmitted , this may have to be pressed
more than once to return to the main index page .
Some menu related functions are not available in TELETEXT mode. MENU and AUTO AD
control functions are not available in TELETEXT mode. If the TV is switched on by
STANDBY after off in TELETEXT mode, or press SOURCE or PC button, the TELETEXT
mode will disappear automatically.
P+
P-
V- V+
SLEEP DISPLAY MUTE POWER
NICAM PC AUTO AD TV/AV
PSM .SSM
OK Q.VIEW
MENU
INDEX TEXT
TIME HOLD SIZE REVEAL
SUBCODE MIX
Teletext features may vary depending on the Broadcasting
Companies and is only available if the channel selected is
transmitting Teletext. Pressing the TEXT button whilst in
Teletext operation will switch the current status to TV.
When in Teletext mode, the volume may still be altered to
the desired listening level.
Page Selection
Pages can be selected in two ways:
a. Press P+ or P- button to increase or decrease the
page number by one.
b. By entering the page number, using the number
keys on the remote control.
Customer helpline:0845 604 0105
Page 25
SUBCODE Button
When Teletext information exceeds more than one page , it may take some time
for the automatic changing of the sub pages to reach the sub page you require .
It is possible to enter your required sub page and continue watching the normal
programme until the correct sub page is found .
Select the required page number using buttons 0-9 .
If the top of the page indicates that sub pages are being transmitted yet the page
does not change . Then the number at the top of the page is there to indicated
that the broadcaster has updated the page s contents , there are no sub pages .
Press SUBCODE button , page number/--- will be displayed at the bottom right
of the screen.
Enter desired sub page number before the page number/--- disappears . To
select page 6 enter 0,0,0 and 6 .
TEXT Button
Press TEXT to enter Teletext mode and only the text page can be visible .
MIX Button
Press MIX button to enter Teletext mode and both the TV picture and text page
can be visible.
TIME
While in normal TV mode only, pressing the button TIME will display the
teletext time in the top right corner for a few seconds.
TELETEXT
Note: The teletext buttons could be working even if there is no teletext signal, but there
is no teletext display.
Customer helpline:0845 604 0105
Page 26
To assist in location possible faults use help guide below.
Troubleshooting Guide
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.
Troubleshooting
No picture, no sound
Verify if the television is properly plugged in.
Verify if the television has a proper supplied power source.
Verify if electricity is available.
Blank screen
Verify if correct signals are input.
Press SOURCE button to change signal input to TV input.
Restart the television of power supply is interrupted.
No sound
Press MUTE button and verify if Mute mode is set.
Switch to other channel and verify if the same problem
happens.
Press VOL+ button to see if the problem can be solved.
Poor sound
Verify if sound system is correct. Refer to user's manual
for adjustment.
No picture in some
channel
Verify if correct channel is selected.
Adjust the antenna.
Make adjustments by FINE TUNE and MANUAL SEARCH.
No color for some channel
program (black and white)
Verify if the same problem exists in other channels.
Check out of picture and sound systems.
Refer to relative instructions in the Manual for color
adjustment.
Spots with some or
all pictures
Verify if the antenna is correctly connected.
Verify if the antenna is in good condition.
Make fine adjustment of channel.
Television out of control
Disconnect the television from power supply and 10
seconds later, connect the television to the power supply.
If the problem still exists, contact authorized after-sales
service for technical assistance.
Customer helpline:0845 604 0105
Page 27
Specifications
Note:
All specifications are subject to change without notice.
All quality are approximate value.
Specifications of the television that you have just purchased may
vary from the information in this table due to technical innovations.
Accessories
Picture, sound
system
Audio output
External input port
Power requirements
Temperature
1.5W+1.5W
COMPONENT , PC , S-VIDEO , Audio input
HDMI, SCART, Antenna
~150-240V 50/60Hz
PAL/SECAM-B/G,I,D/K,L,L
Working:5 C~35 C
Storage:-15 C~45 C
Power consumption
Model
L1911W-A
60W
Remote control
Batteries
Owner s manual
Audio cable
'
Humidity
Working:20%~80%
Storage:5%~90%
L1511W-A
50W
Customer helpline:0845 604 0105
Page 28
Customer helpline:0845 604 0105
Specifications
Page 29
This product is guaranteed against manufacturing defects for a period of
1 Year
This does not cover the product where the fault is due to misuse, abuse, use in
contravention of the instructions, or where the product has been the subject of
unauthorised modifications or alterations, or has been the subject of commercial
use.
In the event of a problem with the product within the guarantee period please call
the customer helpline on 0845 604 0105. If the item is shown to have had an
inherent defect present at the time of sale.
Argos will provide you with a replacement.
Your statutory rights remain unaffected.
Guarantor;Argos Ltd
489-499 Avebury Boulevard
Central Milton Keynes
Mk9 2NW
PRODUCT GUARANTEE
Customer helpline:0845 604 0105
Page 30
V0.1
0090502138A
Customer helpline:0845 604 0105
Loading...