Wharfedale EZ-M 10X2 User Manual

EZ-m

OWNER’S MANUAL

mini-mixer 10x2

Table of Contents

Page

1 Introduction / Features / Back Panel diagram
2 Important Safety & Warranty Information
3 Detailed Features of the EZ-m 10x2 – Mic/Line Input Channel
4 Mono Mic/Line Channel

- Low Impedance (Low Z) MIC Input

- LINE IN

- GAIN Control

- CLIP LED

5 - Mono Channel EQ Section

- Mono Channel PAN and LEVEL
6 Stereo Channel Inputs

- BALANCE & LEVEL
7 MASTER Section

- POWER LED & Signal Metering
8 - 2TK IN

- 2TK OUT

- MAIN OUT ¼” L/R Outputs

- PHONES
9 - POWER Switch On/Off

- AC Power Cable Connector

- CONNECTION WIRING DETAILS

- MIC Inputs

- LINE Inputs

- MAIN MIX Outputs

- Stereo 2 Track Inputs and Outputs (2TK IN / 2TK OUT)

- Headphone Outputs (PHONES)
10 SPECIFICATIONS
11 BLOCK DIAGRAM
Back Cover - Contact Information

Introduction

Thank you for purchasing a Wharfedale Pro EZ-m mini-mixer. The Wharfedale Pro EZ-m Series
mixers are designed for ease of use and quality audio performance. Please read this manual
completely to ensure proper understanding of the features and operation of your mixer.

FEATURES

EZ-m 10x2

- 1 Mono balanced / unbalanced mic / line input channel with 2 Band equalization

- 1 variable input GAIN control on channel 1

- CLIP LED on channel 1

- 2 Stereo channels with balanced / unbalanced ¼” Tip-Ring Sleeve (TRS) jacks

- “2 Track” stereo inputs and outputs with 1/8” stereo and dual RCA jacks

- “2 Track” assignable switches (2TK TO MAINS, 2TK TO PHONES) with level control

- Separate MAIN MIX, and PHONES outputs with level controls

- 4 segment, stereo bar-graph LED meters

- Convenient 1/8” stereo jacks for 2TK IN, 2TK OUT and PHONES

1

Important Safety & Warranty Information

1. Power Supply

This EZ-m Series mini-mixer is supplied with an external power supply unit. Use only the power
supply provided with your mixer. Use of any other power supply could cause damage to the mixer
and other equipment. Connect the power supply to the mixer BEFORE connecting it to the power
source outlet. Be sure to allow for free airflow around the mixer, as it may become warm during
long periods of operation. The mixer is shipped with the correct power supply for the co untry in
which it is to be used. This can be verified by checking the label on the power supply.

2. Packing

The exterior and interior packaging has been designed protect the mixer during transit.
If any shipping damage has occurred, consult your dealer and the shipping provider.

3. Safety

Avoid exposing your EZ-m Series mixer to excessive heat, humidity and dust. Store and
operate the mixer away from locations where it is likely to be exposed to these conditions.
Also, avoid placing your EZ-m Series mixer in locations which may be subject to excessive
vibration/physical shocks that could cause mechanical damage to the mixer.

WARNING: REFER ALL MAINTENANCE, REPAIRS AND MODIFICATIONS TO QUALIFIED
SERVICE PERSONNEL! THIS PRODUCT CONTAINS NO USER-SERVICEABLE PARTS!

For the protection of the mixer and other audio equipment, always turn off the power on the mixer
and other system components before connecting or disconnecting audio cables. Be aware that
excessive volume levels are possible from the output of this mixer. Protect your hearing
accordingly.

4. WARRANTY

The EZ-m Series mixers are covered by a limited warranty, against any defects in workmanship
for a period of one year from the date of purchase. This warranty is non-transferable and applies
only to the original purchaser. If any warranty related issues occur, contact your dealer. Proof of
purchase may be required.

2

DETAILED FEATURES OF THE EZ-m 10x2
Mono Mic / Line Input Channel

3