Whalen XLDEC54-NV Assembly Instructions Manual

LOT NUMBER:
DATE PURCHASED: / /

TM

3-N-1

TV Console with Drawer

Model # XLDEC54-NV

U.S. Patent 8,561,551

This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your
needs. DO NOT discard any of the hardware or parts that you will not use on your chosen option.

This will allow you to use this TV Console in different configurations at a later date, if desired.

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to
the store where it was purchased. Please call our customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

Or e-mail your request to [e-mail]

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Furniture Mfg., Inc. Page 1 Factory No. 33-10944

1-866-942-5362

www.whalenfurniture.com

MAXIMUM RECOMMENDED WEIGHT LOADS

MANUFACTURER: Whalen Furniture Mfg., Inc.
CATALOG: 3-N-1TM TV Console with Drawer (XLDEC54-NV)
DATE OF MANUFACTURE: November 2013
MADE IN CHINA

FITS UP TO MOST 60” FLAT PANEL TVs
MAXIMUM LOAD 135 lb. (61.2 kg)

FITS UP TO MOST 60” FLAT PANEL TVs
WITHOUT SWIVELING BRACKET
MAXIMUM LOAD 135 lb. (61.2 kg)

MAXIMUM LOAD 50 lb. (22.6 kg)

Model # XLDEC54-NV

MAXIMUM LOAD 20 lb. (9 kg)

FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND
WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT
PANEL TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE
CENTER OF THE UNIT; CRT TVS, IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT
PANEL TVS OR OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT
LIMITS COULD FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY.

THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH

GENERAL INFORMATION, TIPS and TRICKS

1. Please read the Assembly Instructions prior to assembling this product.

2. Remove all hardware from the box and sort by size.

3. Check to see that all hardware and parts are present BEFORE assembling.

4. Ask a friend to assist you with the assembly of this furniture.

5. To avoid damage, assemble the product on a sturdy, level and protective surface.

6. Please wait until all steps are completed before fully tightening Bolts.

7. Make sure all Bolts are tightly fastened before the unit is used.
This product is sold with one set of Tipping Restraint Hardware Kit. You must install the

Tipping Restraint Hardware between the wall and the TV console to prevent any accidents or
damages. When properly installed, this restraint can provide protection against the unexpected
tipping of the unit due to small tremors, bumps or climbing. The restraint is only a deterrent
and is not a substitute for proper adult supervision. Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 2 Factory No. 33-10944

Model # XLDEC54-NV

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware
are present before beginning assembly.

A- Top Shelf Frame (1) B- Middle Shelf Frame (1) C- Bottom Shelf Frame (1)

D- Spine Assembly (1) E- Left Metal Leg (1) F- Right Metal Leg (1)

G- Left Leg Top Rail (1) H- Left Wood Leg (1) I- Right Leg Top Rail (1)

J- Right Wood Leg (1) K- Drawer Box (1) L- Top Glass (1)

M- Glass Shelf (1) N- Swiveling Bracket (1) O- Mounting Frame (1)

P- Monitor Bracket (2) Q- Cable Wheel (2) (1) Suction Cup (16+1 extra)

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 3 Factory No. 33-10944

Model # XLDEC54-NV

Parts and Hardware List

(2) 1/2” Bolt (3) 3/4” Bolt (4) 1-1/8” Bolt (5) 2-1/2” Bolt

(4+1 extra) (20+1 extra) (10+1 extra) (1+1 extra)

(6) 1-1/2” Bolt (7) Lock Washer (8) Flat Washer (9) Flange Nut

(10+1 extra) (21+1 extra) (21+1 extra) (1+1 extra)

(10) Concrete Anchor (11) 2-1/2” Lag Bolt (12) Large Flat Washer (13) Spine End Cap

(4) (4) (4+1 extra) (1)

(14) Handle and Bolts M4 Allen Wrench Touch-up Pen Tipping Restraint Hardware Kit (1)

(2) (2) (1) (Inside Plastic Bag)

TV Mounting Kit

M4 x 12 Bolt (4) M4 x 30 Bolt (4) M5 x 12 Bolt (4) M5 x 30 Bolt (4)

M6 x 12 Bolt (4) M6 x 35 Bolt (4) M8 x 16 Bolt (4) M8 x 40 Bolt (4)

M4 Lock Washer (4) M5 Lock Washer (4) M6 Lock Washer (4) M8 Lock Washer (4)

Large Spacer (4) Small Spacer (4) M4/M5 Flat Washer (8) M6/M8 Flat Washer (4)

Tools required: Allen Wrench (provided) and Phillips screwdriver (not provided).

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 4 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions

6

6

1-1/2” Bolt

(5 used in this step)

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make the assembly easier.

1. Unpack the unit and confirm that you have all the hardware and required parts.

2. Locate the Left Leg Top Rail (G) on a scratch free surface with the threaded inserts facing up,
as shown.

3. Align and attach Left Metal Leg (E) to the Left Leg Top Rail (G) using two 1-1/2” Bolts (6), as
shown. Make sure that the front edges are even with each other.

4. Fasten the Left Wood Leg (H) to the Left Metal Leg (E) with three 1-1/2” Bolts (6). As shown.

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 5 Factory No. 33-10944

H

⑥

6

Model # XLDEC54-NV

Assembly Instructions

6

5. Repeat the same procedure to assemble the Right Legs. As shown above.

6

6

1-1/2” Bolt

(5 used in this step)

⑥

J

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 6 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions

6. Locate the Spine Assembly (D) and set the back face down on a scratch-free surface, as

7. Fasten the Top Shelf Frame (A) to the Spine (D) by inserting two 3/4” Bolts (3) with Lock

8. Fasten the Middle and Bottom Shelf Frames (B and C) to the Spine (D) using two 1-1/8” Bolts

3/4” Bolt

(2 used in this step)

shown above.

Washers (7) and Flat Washers (8) through the “U” shape bracket and screw in place. Make
sure that the end brackets will face the bottom of the unit.

(4) in each. Make sure that the inside corner brackets on the Middle Shelf Frame will face up
when the unit is turned upright.

③

1-1/8” Bolt

(4 used in this step)

④

Lock Washer

(2 used in this step)

⑦

Flat Washer

(2 used in this step)

⑧

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 7 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions

3/4” Bolt

(8 used in this step)

③

9. Align and attach the assembled Metal Legs (E and F) to the Shelf Frames (A, B and C). As
shown above.

C

1-1/8” Bolt

(2 used in this step)

④

Lock Washer

(4 used in this step)

⑦

Flat Washer

(4 used in this step)

⑧

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 8 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions

8

7

1-1/8” Bolt

(4 used in this step)

(4 used in this step)

④

10. Insert the Drawer Box (K) between the Middle Shelf Frame (B) and the Bottom Shelf Frame (C)
with the drawer front facing up. Make sure the threaded inserts on the bottom of Drawer Box
(K) overlap the drilled holes on the Bottom Shelf Frame (C) properly.

11. Insert four 1-1/8” Bolts (4) with the Washers (7 and 8) through the drilled holes on the Bottom
Shelf Frame (C) and securely screw into the threaded inserts underneath the Drawer Box (K).

Lock Washer

⑦

Flat Washer

(4 used in this step)

⑧

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 9 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions

12. Stand the unit upright.

13. With the drawers open, remove the bolts in Handles (14), and then use the bolts to attach the
Handles to the outside of the utility drawers.

NOTE: If you need to remove the utility drawer, please pull the drawer all the way out, then
simultaneously push the plastic release lever of the ball bearing slide up on one side and
down on the other side, and then pull it completely out.

14. Go back and tighten all bolts with the enclosed Allen Wrench.

15. If necessary, adjust the pre-attached Floor Levelers at the bottom of both Metal Legs (E and F)
to level the unit.

If you choose the Table-top configuration,

continue to the next step.

If mounting the TV to the Floating Swivel

Mount, skip ahead to PAGE 16.

14

14

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 10 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions for Table-top Console

16. At the back side of the Spine Assembly (D), unscrew the f our bolts and the washers to remove
the Upper Spine. So that you can use the table top console configuration.

NOTE

floating swivel mount.

: Keep the Upper Spine and the fasteners at a proper place in case you will use the

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 11 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions for Table-top Console

17. Fasten the Top Shelf Frame (A) to the Lower Spine (D) by inserting one 2-1/2” Bolt (5) with

18. Plug the Spine End Cap (13) all the way into the top of the Lower Spine (D).

Flat Washer

(1 used in this step)

⑧

the Washers (7 and 8) through the drilled holes on the lower spine and securely screw into the
Flange Nut (9).

2-1/2” Bolt

(1 used in this step)

Flange Nut

(1 used in this step)

⑨

⑤

(1 used in this step)

Lock Washer

(1 used in this step)

⑦

Spine End Cap

⑬

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 12 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions for Table-top Console

19. Attach 2 Cable Wheels (Q) to the backside of Lower Spine (D) with the 3/4” Bolts (3). Tighten
the bolts with the enclosed Allen Wrench.

NOTE: You can use the Cable Wheels to help keep your entertainment center’s cables and
cords organized.

3/4” Bolt

(4 used in this step)

③

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 13 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions for Table-top Console

K

(16 used in this step)

20. Put the Suction Cups (1) firmly into the top holes and inside metal tabs on the Shelf Frames (A
and B). As shown.

: If a suction cup resists insertion, try pressing down on the middle of the cup with the Allen

TIP

Wrench while twisting it clockwise into the hole.

21. Place Glass Shelves (L and M), with the black side of glass down, onto the Suction Cups (1)
on shelf frames. Push all glass shelves all the way back against the Spine. Also, be sure to
press down evenly and firmly each glass onto the Suction Cups to make sure they securely
rest onto the Suction Cups.

NOTE: If a glass shelf is scratched, you can minimize the damage by using a BLACK marker
and filling in scratched area from underneath.

Suction Cup

①

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 14 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions for Table-top Console

Tools required: Allen Wrench (provided), Phillips screwdriver, Mallet, Power Drill, and 3/8” Drill Bit.

22. Position the assembled console at the desired location against a wall. Now, follow the
instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the
tip-over restraint to the Spine and the wall.

NOTE: YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO
THE WALL, TO PREVENT ACCIDENTS AND/OR INJURIES.

23. The console is now ready for use. Be sure to position your Flat Panel TV in the center of the
console.

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 15 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions for Floating Swivel Mount

3/4” Bolt

(6 used in this step)

③

24. Fast the Swiveling Bracket (N) to the top of the Upper Spine (D) with six 3/4” Bolts (3) and
Washers (7 and 8). Make sure that the pivoting bolt head is up. Tighten the bolts with the
enclosed Allen Wrench.

NOTE: The Spine can provide four height options for your TV set. Refer to your TV size and
adjust the Swiveling Bracket at the desired height for optimum viewing.

Lock Washer

(6 used in this step)

⑦

Flat Washer

(6 used in this step)

⑧

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 16 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions for Floating Swivel Mount

1/2” Bolt

(4 used in this step)

Lock Washer

(4 used in this step)

②

25. Hold and attach the flat side of the Mounting Frame (O) onto the Swiveling Bracket (N) with
four 1/2” Bolts (2) and Washers (7 and 8). Make sure that the recess holes on the Mounting
Frame are at the bottom.

⑦

Flat Washer

(4 used in this step)

⑧

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 17 Factory No. 33-10944

Model # XLDEC54-NV

Mounting the Monitor Brackets to a Television with a Flat Back

NOTE

26. Determine the correct diameter of the bolt the TV requires by hand threading them into the
threaded inserts on the back of the TV. If you encounter any resistance, stop immediately. If
you are unable to find the correct bolt, consult a local hardware store.

27. Follow the appropriate diagram above to attach the Monitor Brackets (P) to the back of the TV
with the selected fasteners. Make sure the Monitor Brackets are centered and level with each
other. Secure the bolts with a Phillips screwdriver. DO NOT over tighten the bolts.

NOTE: Lean the TV up against a wall or other solid surface when attaching the Monitor
Brackets. DO NOT place the TV face down on the glass as this may cause permanent damage.

: For televisions with a curved or recessed back, proceed directly to next page.

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 18 Factory No. 33-10944

Model # XLDEC54-NV

Mounting the Monitor Brackets to a Television with a Curved/Recess Back

28. Determine the correct diameter of the bolt the TV requires by hand threading them into the
threaded insert on the back of the TV. If you encounter any resistance, stop immediately. If
you are unable to find the correct bolt consult a local hardware store.

29. Follow the appropriate diagram above to attach the Monitor Brackets (P) to the back of the TV
with the selected fasteners. Make sure the Monitor Brackets are vertically centered and level
with each other. Secure the bolts with a Phillips Screwdriver. DO NOT over tighten the bolts.

NOTE: Lean the TV up against a wall or other solid surface when attaching the Monitor
Brackets. DO NOT place the TV face down on the glass as this may cause permanent damage.

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 19 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions for Floating Swivel Mount

P

MAKE SURE ALL BOLTS ARE TIGHT AND THE SPINE IS AT A 90 DEGREE ANGLE AND
VERIFY THE MOUNTING FRAME IS LEVEL, USING A QUALITY LEVEL, PRIOR TO
INSTALLATION OF TV.

30. Ask for assistance to lift the television up to hang the Monitor Brackets (P) onto the Mounting
Frame (O). Set the hooks on the Monitor Brackets over the Mounting Frame and then lower
them onto the bars of the Mounting Frame.

NOTE: Loosen the Lock Bolt that is pre-attached on the Monitor Brackets to ensure an easy fit
at the bottom hooks.

31. Center the television and tighten both Lock Bolts with a long Phillips screwdriver until they hit
the underside of the Mounting Frame (O) to secure it in place.

1

O

2

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 20 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions for Floating Swivel Mount

Tools required: Allen Wrench (provided), Phillips screwdriver, Mallet, Power Drill, and 3/8” Drill Bit.

32. Repeat steps 19 through 21 to attach the Cable Wheels (Q) and install the Top Glass (L)
and Glass Shelf (M) in place.

33. Carefully move the console and position it at the desired location against a wall. Now, follow
the instructions printed on the plastic bag containing Tipping Restraint Hardware Kit to attach
the tip-over restraint to the Spine (D) and the wall.

NOTE: You must install the Tipping Restraint Hardware with the unit in use to prevent any
accidents or damage to the unit.

34. The console is now ready for use. Swivel the TV left-or-right for optimum viewing control.

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 21 Factory No. 33-10944

Model # XLDEC54-NV

The following steps are only for those who wish to mount their
TV directly to the wall. If you have already mounted your TV to
the Swinging Floater or plan to display your TV on the top
surface of the Console, disregard the following steps.

Assembly Instructions for Universal Wall Mount

Installing the Mounting Frame onto a WOODEN STUD WALL

NOTE: If you are mounting your TV onto brick, solid concrete or concrete block walls, skip this
section. This assembly requires an electric drill, level and stud finder (not included).

35. Using a stud finder, locate the edges of the wood studs. Find the center line of each stud and
draw a vertical reference line on the wall over each one. Place the Mounting Frame (O) level
against the wall where you intend to mount the TV. Using the Mounting Frame (O) as a
template, mark 4 drill points (2 on top, 2 on bottom) with a pencil on the vertical reference lines
you just drew.

36. With an electric drill (not included), drill 3/16 inch diameter holes to at least 2½ inch deep o n
the 4 drill points. While holding the Bracket Plate in place, loosely screw in the Lag Bolts (11).

37. Secure the Mounting Frame (O) to wall with Lag Bolts (11) and Washers (12) at the drill points.
Tighten the Bolts firmly, but be careful not to over-tighten.

Lag Bolt Washer is pulled firmly against the metal plate of the Mounting Frame. If there is a
layer of drywall or other material, this drywall or other material may not exceed 5/8 inch in
thickness. Failure to heed this caution may result property damage and/or personal injury.

Do not over-tighten the Lag Bolts. Tighten the Lag Bolts only until the

2.50" (63 mm)

0.20" (5 mm)

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 22 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instruction for installing the Mounting Frame onto BRICK,

SOLID CONCRETE OR CONCRETE BLOCK WALLS

NEVER use the wall anchors to mount the unit to drywall.

NOTE: If you are mounting your TV to a wall with wooden studs, skip this section. This

assembly requires an electric drill and level (not included).

38. Begin by placing the Mounting Frame (O) level against the wall where you intend to mount the
TV. Using the Mounting Frame (O) as a template, mark 4 drill points with a pencil.

39. With an electric drill (not included) on its low setting, drill 7/16 in ch diameter holes to at least
2½ inch deep. Insert the Concrete Anchors (10) into the pre-drilled holes so that they are flush
with the wall.

40. Place the Mounting Frame (O) level in the desired position against the wall. Secure the
Mounting Frame (O) to the wall with the Lag Bolts (11) and the Washers (12) at the drill points.
Tighten the Bolts firmly, but be careful not to over-tighten.

2.50" (63 mm)

0.4375" (11 mm)

Maximum weight 135 lb. (61.2 kg)

Concrete Anchors should only be used for masonry mounting.

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 23 Factory No. 33-10944

Model # XLDEC54-NV

Assembly Instructions

P

41. Attach the Monitor Brackets (P) to the back of the television following steps 26 & 27, or 28 &
29, depending on the type of TV that you own.

42. Once the Monitor Brackets (P) are attached onto the back of television, as k for assistance to
lift the television up to attach the Monitor Brackets onto the Mounting Frame (O). Place the
hooks of the Monitor Brackets over the Mounting Frame and then lower them onto the bars of
the Mounting Frame. Loosen the Lock Bolts that are pre-attached on the Monitor Brackets to
ensure an easy fit at the bottom hooks. Proceed to center the television. When the TV is in its
intended position, tighten both lock bolts with a long Phillips screwdriver until they hit
underside of the Mounting Frame (O). This will ensure the TV is safely secured to the wall.

43. Plac e the assembled console under your TV. Finally, connect the A/V and power cables to your
TV. You are now ready to enjoy your wall-mounted Flat Panel TV.

1

O

2

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 24 Factory No. 33-10944

Model # XLDEC54-NV

Care and Maintenance

 Use a soft, clean cloth that will not scratch the surface when dusting.
 Use of furniture polish is not necessary. Should you choose to use polish, test first in an

inconspicuous area.

 Using solv ents of any kind on your furniture may damage the finish.
 Never use water to clean your furniture as it may cause damage to the finish.
 Always use coasters under beverage glasses and flowerpots.
 Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid

rubbing.

 Always use protective pads under hot dishes and plates. Heat can cause chemical changes that

may create spotting within the furniture finish.

 Stains or marks from crayons or ink markers will be difficult to remove.
 In the event that your furniture is stained or otherwise damaged during use, we recommend that

you call a professional to repair your furniture.

 Check bolts/screws periodically and tighten them if necessary.

Further advice about furniture care

It is best to keep your furniture in a climate-controlled environment. Extreme temperature and
humidity changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep
furniture away from direct sunlight as sun may damage the finish.

Proper care and cleaning at home will extend the life of your purchase. Follow these important and
helpful tips that will enhance your furniture as it ages.

A Touch-up Pen has been provided to repair any small nicks or scratches that may occur
during assembly or shipping.

We hope you enjoy your purchase for many years.

Thank you for choosing Whalen Furniture!

We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair

or replace it for up to one (1) year from the date of purchase. Every Whalen Furniture product is
designed to meet your highest expectations. We guarantee that you will immediately see the value of
our fine furniture.

This warranty gives you specific legal rights and you may also have other rights which vary from
State to State (province to province).

Customer Service: 1-866-942-5362

8:30 a.m. - 4:30 p.m., PST, Monday to Friday

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 25 Factory No. 33-10944

QUALITY GUARANTEE

www.whalenfurniture.com

3-N-1

TM

TV Console with Drawer (XLDEC54-NV)

IF YOU NEED TO ORDER ANY REPLACEMENT PARTS, PLEASE USE THE LIST BELOW

*XLDEC54-NV-1-US Upper Spine *XLDEC54-NV-22-FL Floor Leveler

*XLDEC54-NV-2-LS Lower Spine *XLDEC54-NV-23-OPG Oval Plastic Grommet

*XLDEC54-NV-3-TG Top Glass *XLDEC54-NV-24-SEC Spine End Cap (40 x 60 mm)

*XLDEC54-NV-4-GS Glass Shelf *XLDEC54-NV-25-HB Handle and Bolts

*XLDEC54-NV-5-LML Left Metal Leg *XLDEC54-NV-26-SC Suction Cup

*XLDEC54-NV-6-RML Right Metal Leg *XLDEC54-NV-27-1/2B 1/2” Bolt

*XLDEC54-NV-7-LWL Left Wood Leg *XLDEC54-NV-28-3/4B 3/4” Bolt

*XLDEC54-NV-8-RWL Right Wood Leg *XLDEC54-NV-29-1 1/8B 1-1/8” Bolt

*XLDEC54-NV-9-LLTR Left Leg Top Rail *XLDEC54-NV-30-2 1/2B 2-1/2” Bolt

*XLDEC54-NV-10-RLTR Right Leg Top Rail *XLDEC54-NV-31-1 1/2B 1-1/2” Bolt

*XLDEC54-NV-11-CW Cable Wheel *XLDEC54-NV-32-LW Lock Washer

*XLDEC54-NV-12-TSF Top Shelf Frame *XLDEC54-NV-33-FW Flat Washer

*XLDEC54-NV-13-MSF Middle Shelf Frame *XLDEC54-NV-34-FN Flange Nut

*XLDEC54-NV-14-BSF Bottom Shelf Frame *XLDEC54-NV-35-2 1/2LB 2-1/2” Lag Bolt

*XLDEC54-NV-15-DB Drawer Box *XLDEC54-NV-36-LFW Large Flat Washer

*XLDEC54-NV-16-UD Utility Drawer *XLDEC54-NV-37-CA Concrete Anchor

*XLDEC54-NV-17-DS Drawer Slides (36 mm x 12" L) *XLDEC54-NV-38-TRHK Tipping Restraint Hardware Kit

*XLDEC54-NV-18-MF Mounting Frame *XLDEC54-NV-39-M4AW M4 Allen Wrench

*XLDEC

5

4

-

NV

-

19

-

MB

M

on

i

tor

B

rac

k

et

*XLDEC54-NV-40-TUP Touch-up Pen

*XLDEC54-NV-20-LB Lock Bolt *XLDEC54-NV-TVMK TV Mounting Kit