Page 1
LOT NUMBER:
DATE PURCHASE
D: / /
Santa Fe Kitchen Cart with Metal Shelves
Stock # SFKCWMS
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions and
parts list ready to provide the model name, part name or factory number:
1-866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenstyle.com
Or e-mail your request to parts@whalenfurniture.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2016-01-07 Rev. 2 Factory: FOCIDI
Page 2
Stock # SFKCWMS
MAXIMUM RECOMMENDED WEIGHT LOADS
GE N ERAL I N FORM A T ION, T IPS
an d
TRI CKS
CAUSING POS
SIBLE SERIOUS INJURY.
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Santa Fe Kitchen Cart with Metal Shelves (SFKCWMS)
DATE OF MANUFACTURE: January 2016
MADE IN CHINA
FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND
WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL
TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTRE OF
THE UNIT; THE BASE OF THE TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING
SURFACE OF THE UNIT WITHOUT OVER-HANGING THE EDGES. IMPROPERLY POSITIONED
FLAT PANEL TVS, OR FLAT PANEL TVS INCLUDING OTHER EQUIPMENT THAT EXCEED
RECOMMENDED SIZE AND WEIGHT LIMITS COULD FALL OFF OR BREAK THE UNIT,
1. Please read the Assembly Instructions prior to assembling the unit.
2. To avoid damage, assemble the unit on a sturdy, level and non-abrasive surface.
3. Keep all hardware part out of reach of children.
4. Please wait until all steps are completed before fully tightening bolts.
5. Make sure all bolts are tightly fastened before the unit is used.
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing Page 2 Factory: FOCIDI
THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH
1-866-942-5362
FITS UP TO MOST 55" FLAT PANEL TVs
MAXIMUM LOAD 100 lb. (45.3 kg)
PLACE TV BEHIND THE STOPPER
MAXIMUM LOAD 20 lb. (9.07 kg)
MAXIMUM LOAD 50 lb. (22.6 kg)
Page 3
Stock # SFKCWMS
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Top Section (1) B- Metal Shelf (2)
C- Left Front / Right Back Leg (2) D- Right Front / Left Back Leg (2) E- Side Handle (2)
F- Metal Bar (4) G- Locking Caster (2) H- Swivel Caster (2)
I- Stop Rail (1)
(1) Ø1/4" x 5/8" Bolt (2) Ø1/4" x 1-1/4" Bolt (3) Ø1/4" x 1-3/4" Bolt
(16+1 extra) (8+1 extra) (4+1 extra)
(4) Lock Washer (5) Flat Washer (6) Drawer Handle with Bolts
(20+1 extra) (20+1 extra) (2)
4 mm Allen Wrench (1) Open Wrench (1) Touch-up Pen (1)
Tools required: Allen wrench and open wrench (provided), Phillips screwdriver (not provided).
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing Page 3 Factory: FOCIDI
1-866-942-5362
Page 4
Stock # SFKCWMS
⑥
Assembly Instructions
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing Page 4 Factory: FOCIDI
Drawer Handle with Bolts
(2 used in this step)
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Place the Top Section (A) on a level and protective surface.
3. Remove the utility drawers for the following steps. To remove the drawers, please pull the drawers all
the way out, then simultaneously push the plastic release lever of the ball bearing slides up on one side
and down on the other side, and then pull the drawers completely out.
4. Remove the bolts in Drawer Handles (6), and then use the bolts to attach the Handles to the outside of
the utility drawers by a Phillips screwdriver.
A
1-866-942-5362
6
6
Page 5
Stock # SFKCWMS
⑤
②
④
Assembly Instructions
A
C/D
D
C
Flat Washer
(8 used in this step)
5
4
2
A
C
D
Ø1/4" x 1-1/4" Bolt
5. Align and attach four Legs (C and D) to the apron corners of the Top Section (A), using eight 1-1/4"
Bolts (2) with Lock Washers (4) and Flat Washers (5) from inside through the drilled holes on side
panels and screw into place. As shown.
(8 used in this step)
Lock Washer
(8 used in this step)
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing Page 5 Factory: FOCIDI
1-866-942-5362
Page 6
E
⑤
④
③
3
Ø1/4" x 1-3/4" Bolt
(4 used in this step)
Assembly Instructions
A
4
5
Lock Washer
(4 used in this step)
E
A
Stock # SFKCWMS
Flat Washer
(4 used in this step)
E
6. Attach the Side Handles (E) to the side panels of the Top Section (A) with four 1-3/4" Bolts (3) and
four Washers (4 and 5). As shown.
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing Page 6 Factory: FOCIDI
1-866-942-5362
Page 7
Stock # SFKCWMS
①
Assembly Instructions
C/D
C
F
D
Ø1/4" x 5/8" Bolt
(8 used in this step)
7. Fasten the Metal Bars (F) between the Legs (C and D) with eight 5/8" Bolts (1).
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing Page 7 Factory: FOCIDI
1-866-942-5362
F
1
A
D
C
F
Page 8
Stock # SFKCWMS
Assembly Instructions
G
G
C
D
8. Securely screw the Casters (G and H) to the bottom of Legs (C and D) with the enclosed open wrench.
Make sure that two Locking Casters (G) are located at the same short end.
A
H
H
D
C
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing Page 8 Factory: FOCIDI
1-866-942-5362
Page 9
Stock # SFKCWMS
①
⑤
④
Assembly Instructions
B
B
C
D
B
C
B
D
Ø1/4" x 5/8" Bolt
(8 used in this step)
9. Flip the assembled unit at its back edges. Fit the Metal Shelves (B) between the Legs (C and D) making
sure the metal tabs overlap the threaded inserts on Legs (C and D). As shown.
10. Fasten the Metal Shelves (B) to the Legs (C and D) using the 5/8" Bolts (1) with the Washers (4 and 5)
through the metal tabs and screw into the legs.
11. Go back and tighten all bolts with the enclosed Allen wrench.
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing Page 9 Factory: FOCIDI
1-866-942-5362
D
C
D
Lock Washer
(8 used in this step)
C
1
4
C/D
5
B
Flat Washer
(8 used in this step)
Page 10
Stock # SFKCWMS
Assembly Instructions
12. Ask for assistance to stand the assembled unit upright.
13. Now, insert the removed drawers into the Top Section (A) to finish the assembly. To place the drawer
back, simply push the ball bearing cart all the way to the end of the slides (on both sides), and align the
slide runners on the drawer with the slides track on the unit. Push it carefully inside until it stops.
NOTE: If the drawer does not go in smoothly, please take it out and repeat the step.
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 10 Factory: FOCIDI
Page 11
Stock # SFKCWMS
Assembly Instructions
NOTE: You must install the Strip Stopper to prevent the TV from tipping when placing your flat panel
television directly on the console.
14. Remove the paper backing of Stop Rail (I), then properly align the Stop Rail with the top edge of the
stopper template on Top Panel (A). Press down on the Stop Rail to help adhesion.
15. Carefully remove the stopper template from the Top Panel (A).
I
I
A
I
A
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 11 Factory: FOCIDI
Page 12
Stock # SFKCWMS
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage your furniture’s finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
Stains or marks from crayons or ink markers will be difficult to remove.
In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful
tips will enhance your furniture as it ages.
A touch-up pen has been provided to repair any small nicks or scratches that may occur during
assembly or shipping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or
replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet
your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from State to State.
Customer Service: 1-866-942-5362
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenstyle.com
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing Page 12 Factory: FOCIDI
1-866-942-5362
Loading...