Instructions
Instructions Instructions
Instructions for use
for usefor use
for use
Multiport 201 12 ENG – Rev. 1
Posizione logo
Multiport
Safety advice
Safety adviceSafety advice
Safety advice
Product description
Product descriptionProduct description
Product description
Multiport is an optional data logger for laboratory instruments , based on a connected USB mass storage device, and/or commun
(serial ports, USB).
The 10/100-
baseT Ethernet connection is available only for manufacturer’s internal purposes and is not available for the user.
Intended use of the product
Intended use of the productIntended use of the product
Intended use of the product
Digital data saving and/or communication port expansion for laboratory
instruments.
Safety recommendations
Safety recommendationsSafety recommendations
Safety recommendations
•
The product shall be installed, used and serviced in accordance with these instructions for use, otherwise the
may be
impaired. The user is responsible for the proper installation, the correct use and maintenance of the product in accordance w
listed in this manual.
• The product is intended for indoor use only.
• The device is intended for professional use only by trained people.
•
The product must not be used in presence of explosive or flammable gases, vapours,
• Keep away from direct sunlight and other heat or humidity sources.
• Do not remove the name plate or any label from the product.
•
Do not pour water or any other liquids over the product.
All
drawings, images and texts contained in this manual are the property of the manufacturer.
All rights reserved. Even partial duplication of drawings, images or text is prohibited.
The information contained in this document is subject to change without prior notice.
•
Do not pour water or any other liquids over the product.
•
Unplug the mains cable before inspecting, carrying out maintenance or servicing the product.
•
Repairs, maintenance and service must be carried out by service technicians authorized by the manufacturer and using genuine
• Connect only to double insulated, limited energy circuit. Power
supply must be double
• Power supply must provide limited energy
circuit, as this is an essential requirement against overheat, flame and fire.
• In case of transport use original or appropriate packaging.
•
Disconnect power supply before cleaning: Never use disinfectants or abrasive products.
ication port expansion
protection provided by the equipment
ith the instructions
liquids or solids.
2
spare parts only.
insulated.
Safety advice
Safety adviceSafety advice
Safety advice
Warning! Risk of injury.
Attention! To prevent damage occurring.
Symbols used in this manual and displayed on the product
Symbols used in this manual and displayed on the productSymbols used in this manual and displayed on the product
Symbols used in this manual and displayed on the product
Equipment certified for CAN/US markets.
Equipment is compliant to European applicable directives.
USB port.
ON/OFF logo. Yellow color indicates that the equipment is powered but not operating (sleep mode, waiting for data).
Serial port connector. RS-232C compatible.
Ethernet connector. 10/100-baseT. UTP cable compatible.
Data transfer in progress. Blinking green indicates data flow (transmitting / receiving). Blinking red indicates that some da
DC Power supply connector polarity, central positive.
European Union Only:
This equipment is marked with the above recycling symbol. It means that, at the end of the lifespan of the equipment, you mu
it separately at an appropriate collection point and not place it in the normal domestic or in unsorted waste..
Note: Marking is in compliance with EU Directive 2002/96/EC.
3
ta
have been lost.
st dispose of
Contents of the package
Contents of the packageContents of the package
Contents of the package
Serial data cable
Rubber feet
Multiport data logger
USB pen drive
Adhesive
grip stripes
24V supply cable
(connect to W&H LINA sterilizer only)
Documentation CD
4
Quick Start Guide
Loading...