2.
Instructions for using the unit.
Press and hold the power button for 3-5 Seconds to turn the unit on.
Next, select what source you want to listen to, either Bluetooth or Auxiliary input.
Pairing with Blue Tooth is easy, rst press the source button on the unit until you
see the source indicator light ash blue, next turn on your blue tooth device and
search for WS-Stealth, then select it. That’s it! You are now paired with the unit.
NOTICE: You can only pair one device to the unit at a time. If the unit is not
blinking (indicating that it’s in pairing mode) make sure that it’s not connected
to another device. If you are connected and want to pair another device, rst
you must go to the settings in your Bluetooth device and turn it off allowing the
Stealth Soundbar to automatically search for new devices.
Some unique features on the Stealth Soundbar when playing your Bluetooth
device, you can use the buttons on the sound bar to control your device by
advancing tracks or replaying music on your device as well as volume. Also, by
pressing the power button on the unit it will pause your music on your device and
by pressing it again it will allow the device to continue playing. When the unit is
selected in Auxiliary mode and the power button is pressed, the unit will mute the
audio and un-mute the audio when pressed again.
When you are nished listening to music, simply press the power button and hold
for 3-5 seconds and the unit will turn off. If the unit does not sense a signal from
either the blue tooth or auxiliary input for 10 minutes, it will automatically turn
itself off.
For further questions, please call 1-877-938-7757 or check us out on the web.
www.wetsounds.com
Thank You.