Wet Sounds ST-AS 10, ST-AS 8, ST-AS 6 Product Manual

STEALTH AS SERIES

ST-AS 10 / ST-AS 8 / ST-AS 6

ACTIVE SUBWOOFER ENCLOSURE

INSTALLATION / OWNER'S MANUAL

HIGH PERFORMANCE AUDIO

REV DATE JUNE 2017

wetsounds. com

THANK YOU FOR PURCHASING WET SOUNDS!1

Congratulations! Thank You for purchasing the Wet Sounds STEALTH
Series powered subwoofer system.

Wet Sounds professional marine audio products represent the ultimate
in high performance marine audio. Wet Sounds products are specifically
engineered to withstand the rigorous marine environment.

The STEALTH series powered subwoofer enclosures bring Wet Sounds
performance technology to the harsh marine and off-road environment in
a complete, all in one package. Stealth subwoofers will bring on the bass
thumping sound to make a good Boat, ATV, or UTV audio system GREAT!

• Lightweight Rotationally Molded Polyethylene Housing – tough enough to
withstand harsh environments

• 500 Watt Amplifier (AS-10), 350 Watt Amplifier (AS-8), 250 Watt
Amplifier (AS-6)

• High Efficiency Class D Design – sealed against moisture and dirt

• Easy Plug & Play connection with STEALTH Soundbars, or any other system

• High Excursion subwoofer driver – computer matched to the enclosure

• Remote level control included

• Stainless steel mounting hardware included

• Durable aluminum grill

• Auto or manual turn-on function

• Thermal and over/under voltage protection circuitry

Please take a moment to read the instruction manual before starting your
installation. If you have any questions or concerns, please contact your
certified Wet Sounds dealer or Wet Sounds:

877-WET-SPKR (1-877-938-7757)

www.wetsounds.com

Wet Sounds STEALTH ST-AS SERIES SUBWOOFERS Installation / Owner’s Manual

2 INSTALLATION INSTRUCTIONS

IMPORTANT! BEFORE MAKING ANY CONNECTIONS, DISCONNECT THE
BATTERY POWER UNTIL THE INSTALLATION IS COMPLETED TO AVOID
POSSIBLE DAMAGE TO THE ELECTRICAL SYSTEM.

INSTALLATION

Mounting

Find the proper spot in your vehicle to mount the subwoofer enclosure. The
enclosure should be mounted securely to a flat surface using the supplied
hardware. For the ST AS-10, the mounting holes are integrated into the
enclosure. For the ST AS-6 / 8, install the supplied mounting feet to the
enclosure using the supplied hardware. The feet can be rotated to fit the floor
of the vehicle.

WIRING THE HARNESS FOR THE ST SERIES SUBWOOFER

IF INSTALLING ON A GAS OR DIESEL VEHICLE – wire the Negative (Black)
wire (2) on the subwoofer harness to the Negative (-) battery terminal and

the Positive (Red) wire (1) on the subwoofer harness to the Positive (+)
battery terminal.

IF INSTALLING ON AN ELECTRIC VEHICLE – switch it into TOW mode. Wire the
Negative (Black) wire (2) on the subwoofer harness to Ground on the DC-DC

Converter and the Positive (Red) wire (1) on the subwoofer harness to the
Positive (+) post on the DC-DC converter.

Note: DC-DC Converter is required on electric vehicles to avoid damage to

the accessory and the vehicle!

Wet Sounds STEALTH ST-AS SERIES SUBWOOFERS Installation / Owner’s Manual