B
Bedford Baby
Assembly Instructions
Monterey Dressing Combo
!
§
TO PREVENT DEATH OR SERIOUS INJURY, ALWAYS KEEP CHILD WITHIN ARM’S
REACH.
§
THIS PRODUCT IS NOT INTENDED TO BE USED AS A CHANGING TABLE UNLESS
EQUIPPED WITH AN APPROVED CHANGING PAD THAT MEETS ASTM F2388-06.
USE OF THE PRODUCT WITHOUT THIS MAY RESULT IN DEATH OR SERIOUS
INJURY TO YOUR CHILD FROM FALLING.
THE MAXIMUM WEIGHT OF THE OCCUPANT MAY NOT EXCEED 30 LBS. (13.6 kg).
§
THE CHANGING PAD MAY NOT EXCEED 44 IN. (1115 mm) IN LENGTH OR
§
18 IN. (455 mm) IN WIDTH.
§
THE CHANGING PAD MUST BE SECURED TO THE CHANGING SURFACE FOLLOWING
THE PAD MANUFACTURER’S INSTRUCTIONS.
§
READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE OR THE
CHANGING PAD.
§
DO NOT USE CHANGING TABLE OR CHANGING PAD IF BROKEN
§
KEEP ALL INSTRUCTIONS FOR THE FUTURE
WARNING: FALL HAZARD
.
.
.
Congratulations on your purchase of a Bedford product. We take great pride
in the quality and design of our furniture. The safety of your child is our highest
priority. It is important that you read these instructions carefully and completely
to ensure that this product functions as it was designed.
After opening the package, check to see that all the parts are present. If you
think something is missing, please contact your retailer, and they can arrange
to have the missing parts quickly replaced. You can also contact us
directly, by calling 1-908-719-4707, or emailing support@westwoodbaby.com.
If any aspect of these instructions is unclear, please contact your retailer or
Bedford Baby for assistance.
Parts Included in Package:
Shelf
A
4 x Phillips Head Bolt
D
H
4 x Shelf Tab
B
4 x Wood Screw
E
H
4 x Removable Foot
C
4 x Felt Pads
F
H
Step 1
A. Unpack all the components from the packaging.
The feet are located in one of the drawers.
B. Screw the feet into the base.
Removable Foot (C)
Step 2
A. Stick the felt pads (H) onto the shelf tabs (D) so
the tabs don’t scratch the shelf.
B. Insert the shelf tabs into the holes on the
inside of the door, and carefully lower the shelf (C)
onto the tabs.
C. If desired, you can screw ½” long wood screws
(not included) through the holes in the bottom of the
shelf tabs into the bottom of the shelf to prevent the
shelf from being accidentally removed.
D. If you are using a changing pad, secure it to the
combo as instructed by the pad manufacturer.
Shelf Tab (D)
B
635 N. Billy Mitchell Rd., Ste. B
Salt Lake City, UT 84116 USA
Phone: 1-908-719-4707
support@westwoodbaby.com
Bedford Baby
June 25, 2007
Loading...