Technical Data Sheet
RG11/U Type Quad-Shield
PART NUMBER:
DESCRIPTION: RG11/U – 1 Conductor 14 AWG Solid, 100% Al. Foil + 65% +Al. Braid 100% Al. Foil + 55%
NEC RATING: CATV
APPROVALS: (UL) Listed
APPLICATION: – CATV/MATV
Q821F
CATV Cable
Al. Braid, Flooding Material and an overall PE Jacket.
2833 West Chestnut Street
Washington, PA 15301
Toll Free: (800) 245-4964
Fax: (724) 222-6420
www.westpenn-wpw.com
Construction Parameters:
Conductor 14 AWG Bare Copper
Stranding Solid
Insulation Material Gas Injected Polyethylene
Insulation Thickness .280” Nom.
Number of Conductors 1 Center Conductor
Shield 100% Al Foil + 65% Al. Braid+
100% Al Foil + 55% Al Braid
Flooding Compounds Yes
Jacket Material PE - Polyethylene
Overall Cable Diameter 0.405'' Nom.
Approximate Cable Weight 59 Lbs/1M' Nom.
Flame Rating Article 725
Electrical & Environmental Properties:
Temperature Rating -20deg C to 60deg C
Max.Capacitance Between Conductors @ 1 KHz 16.2 pf/ft Nom.
Velocity of Propagation 82% Nom.
Impedance 75 ohms Nom.
DC Resistance per Conductor @ 20deg C 2.6 Ohms/1M' Nom.
Jacket Color Black
RoHS Compliant Yes
Mechanical Properties:
Max. Recommended Pull Tension 315 lbs.
Min. Bend Radius (Install) 4.10”
Mhz db/100ft
5 .23
55 .92
100 1.20
270 1.92
400 2.4
550 2.85
750 3.40
1000 4.05
1800 5.90
2250 6.42
Connectors and Accessories
F Crimp: CN-F11ALX
F Compression: CN-FSNS11
Specification Issue Date: 7/06
This document is the property of West Penn Wire.
.
The information contained herein is considered
Proprietary and not to be reproduced by any means
Without written consent of West Penn Wire
Standard Lengths are 1000ft.
The Jacket is sequentially footmarked.
The information presented here is, to the best of our
knowledge, is true and accurate. However, since
conditions of use are beyond our control, all
recommendations or suggestions are presented
without guarantee or responsibility on our part. We
disclaim all liability in connection with the use of
information contained herein or otherwise.