West Penn FI-4270 Specsheet

FIBER OPTIC CONNECTIONS

FiberExpress- Brilliance

Fiber Optic Kit

BRILLIANCE TOOL KIT: FI-4270

The Tool Kit Contains all accessories in the Basic Kit, and also includes a Field Cleaver,
VFL and microscope. The cleaver is a generic field cleaver commonly called a
“score and snap” Cleaver. The VFL (Visual Fault Laser) is included with adapter
cords that enables on-site installation assurance.

INSTALLATION:

1. Strip and cleave the fiber optic cable to required length

2. Insert cleaved and cleaned fiber into the connector housing

3. Activate the fiber secure tab

4. Push boot onto the connector body

SAVES TIME: • Less than 5 Seconds

• NO tools required for termination

• Set up times are greatly reduced

• Connectors are useable - up to 5 times

SAVES MONEY: • No special/proprietary tools

• Install kits are less expensive

• Low training expense and time

BRILLIANCE FEATURES:

• NO epoxy required • Unlimited shelf life

• NO polishing required • Compact, convenient tool kit

• Pre-radius PC polished tip • Multimode and SingleMode connectors

• Critical steps are performed in factory • Training video included -USB

• Floating Non-optical disconnect SC & LC Connectors

• Will perform ST, SC, and LC Connectors

FI-4270 Field Kit

BRILLIANCE CONNECTORS:

The FiberExpress Brilliance Field-installable Connectors ensure reliable network
performance by virtue of their superior design and manufacture, which includes
use of the best materials available, expert polishing processes,and a 100% con­nector reliability test methodology. Quality of this kind enables WPW to provide
a 100% installation yield guarantee – even when the connectors are used in en­vironments with temperatures ranging from -40oC to +75oC. The patent-pend­ing FiberExpress Brilliance Connector is the only fiber optic connector in the
marketplace to overcome the key challenges of connector installation in the
field, that is, it provides a quick and greatly simplified tool-less fiber termination
process and the ability to quickly and reliably verify the termination once it’s
made.
West Penn Wire’s FiberExpress Brilliance Field-installable Connectors are avail­able as 900 I!m tight buffered single-mode and multimode (OM1,OM2,
OM3/OM4) LC Connectors, as well as 900 I!m tight buffered multimode (OM1,
OM2, OM3/OM4) SC and ST Connectors. The connectors are available individu­ally, or in a bulk recyclable package where the 25 connectors are separated from
the boots within the package.

FiberExpress Tools and Accessories

Catalog No. Description

FI-4270 FiberExpress Field Installable Complete Kit

LC Connectors

FI-4240 LC - 900µm, Multimode Beige Connector, 62.5um
FI-4241 LC - 900µm, Multimode Black Connector, 50um
FI-4242 LC - 900µm, Multimode Aqua Connector, 50um OM3
FI-4243 LC - 900µm, Single-mode Blue Connector, 8um

SC Connectors

FI-4244 SC - 900µm, Multimode Beige Connector, 62.5um

FI-4245 SC - 900µm, Multimode Black Connector, 50um

FI-4246 SC - 900µm, Multimode Aqua Connector, 50um OM3
FI-4247 SC - 900µm, Single-mode Connector, 8um

FI-5214 2.0mm Boots for all Brilliance Connectors

ST Connectors

FI-4248 ST - 900µm, Multimode Beige Connector, 62.5um
FI-4249 ST - 900µm, Multimode Black Connector, 50um
FI-4250 ST - 900µm, Multimode Aqua Connector, 50um OM3
FI-4251 ST - 900µm, Single-mode Connector, 8um

PARAMETERS

Interconnection Compatibility
Field Assembly Time

Insertion Loss (MM and SM)
Durability (MM and SM)
Nominal fiber O.D
Storage Temperature
Operating Temperature
Tensile Strength
Reflectance (MM)
Reflectance (SM)
Ferrule

SPECIFICATIONS

ST Compatible, SC Compatible, and LC Compatible
1 minute 900um, 3 minutes for Jacketed fiber
.3dB (Typical)
MM- less then .2 dB Change, SM- less than .3 dB change (500 cycles)
125um

-40° to 40° C
0°to55°C
12 lbs. (54 N)

-30dB (Typical)

-40dB (Typical)
Ceramic

www.westpenn-wpw.com
800-245-4964

For: M9C006 and
M9C014