West Penn D980RD1000 Specsheet

Technical Data Sheet
Fire Alarm Cables-

PART NUMBER:

DESCRIPTION: 18/2 Solid bare copper conductors, unshielded with an overall jacket.

NEC RATING: FPLR, NEC Article 760

APPROVALS: (UL) Listed

APPLICATION: Indoor data fire alarm cable for (Data Circuits, Initiating Circuits, Notification Circuits, Addressable

Addressable

D980

Systems)

2833 West Chestnut Street

Washington, PA 15301

Toll Free: [phone]

Fax: [phone]

www.westpenn-wpw.com

Construction Parameters:

Conductor 18 AWG Bare Copper
Stranding Solid
Insulation Material Polyolefin
Insulation Thickness 0.015'' Nom.
Number of Conductors 2
Shield None
Drain None
Jacket Material PVC
Jacket Thickness 0.030'' Nom.
Overall Cable Diameter 0.182'' Nom.
Approximate Cable Weight 21 Lbs/1M' Nom.
Flame Rating UL 1666 Riser Flame Test

Electrical & Environmental Properties:

Temperature Rating -20deg C to 60deg C
Operating Voltage 300 V RMS
Max.Capacitance Between Conductors @ 1 KHz 16 pf/ft Nom.
DC Resistance per Conductor @ 20deg C 6.5 Ohms/1M' Nom.
Velocity of Propagation 71% Nom.
Insulation Colors Black, Red
Jacket Color Red
RoHS Compliant --

Mechanical Properties:

Max. Recommended Pull Tension 39.2 lbs.
Min. Bend Radius (Install) 2”

Specification Issue Date: 7/06

This document is the property of West Penn Wire.

.

The information contained herein is considered
Proprietary and not to be reproduced by any means
Without written consent of West Penn Wire

Standard Lengths are 1000ft.
The Jacket is sequentially footmarked.
The information presented here is, to the best of our
knowledge, is true and accurate. However, since
conditions of use are beyond our control, all
recommendations or suggestions are presented
without guarantee or responsibility on our part. We
disclaim all liability in connection with the use of
information contained herein or otherwise.