West Penn D4853GY1000 Specsheet

Technical Data Sheet
Data Grade RS-485 Cables

PART NUMBER:

DESCRIPTION: 24/6 Stranded tinned copper conductors, shielded with an overall jacket.

NEC RATING: CM, NEC Article 800

APPROVALS: (UL) Listed

APPLICATION: Indoor data cable for: Computer Application, Low-Capacitance Data.

2833 West Chestnut Street

Washington, PA 15301

Toll Free: [phone]

Fax: [phone]

www.westpenn-wpw.com

D4853

Construction Parameters:

Conductor 24 AWG Tinned Copper
Stranding 7x32
Insulation Material Polyolefin
Insulation Thickness 0.035'' Nom.
Number of Conductors 6
Shield 100% Aluminum Polyester Foil
Drain Stranded Tinned Copper
Jacket Material PVC
Jacket Thickness 0.032'' Nom.
Overall Cable Diameter 0.320'' Nom.
Approximate Cable Weight 73 Lbs/1M' Nom.
Flame Rating UL 1685

Electrical & Environmental Properties:

Temperature Rating -20deg C to 60deg C
Operating Voltage 300 V RMS
Max.Capacitance Between Conductors @ 1 KHz 12.8 pf/ft Nom.
Capacitance Between Conductors to Shield @ 1 KHz 23 pf/ft Nom.
DC Resistance per Conductor @ 20deg C 24 Ohms/1M' Nom.
Velocity of Propagation 66% Nom.
Impedance 120Ω Nom
Insulation Colors 1. Blue- White/Blue, 2. Orange-White/Orange,

3. Green-White/Green
Jacket Color Gray
RoHS Compliant --

Mechanical Properties:

Max. Recommended Pull Tension 105 lbs.
Min. Bend Radius (Install) 3.2”

Specification Issue Date: 7/06

This document is the property of West Penn Wire.

.

The information contained herein is considered
Proprietary and not to be reproduced by any means
Without written consent of West Penn Wire

Standard Lengths are 1000ft.
The Jacket is sequentially footmarked.
The information presented here is, to the best of our
knowledge, is true and accurate. However, since
conditions of use are beyond our control, all
recommendations or suggestions are presented
without guarantee or responsibility on our part. We
disclaim all liability in connection with the use of
information contained herein or otherwise.