West Penn CN-F56TFE Datasheet

Rev. 1. 5/05

CN-F56TFE

CN-F56TFE

RG6/U PLENUM “F” TYPE CONNECTOR

.767”

.372”

.395”

Dia.-.290”

Dia.-.425”

NOT TO SCALE

Step 1:

Strip 1/2" of the jacket to expose the braid shield.

Step 2:

Bend the exposed shield wire back over the outer jacket.
Do not disturb the foil shield beneath the shield.

Step 3:

Strip core back to expose conductor 1/4".

Step 4:

Slide the shank of the "F" connector over the foil shield
and under the braid shield. Push the connector onto the
cable, until the shoulder of the connector is firmly seated
against the braid shield. Crimp connector with proper
tool as recommended by your connector manufacturer.

CRIMP TOOL- TL-111
STRIP TOOL- TL-120

CABLES:
256350, 25841

2833 WEST CHESTNUT STEET

WASHINGTON, PA 15301

800-245-4964

www.westpenn-cdt.com

[e-mail]