West Penn AV-IP-WP772-WH Specsheet

Specifications

Environment

HDMI, VGA and USB connectivity.

Devices

Blu-Ray, projectors, monitors, TV, PC, laptops, servers, and Smart White Boards.

Bandwidth

300MHz

Signals

HDMI 1.4 (4K/30), VGA (1920x1200), USB 2.0 and HDCP 2.2.

Connectors

Note: Cables not included.

One (1) HDMI receptacle.
One (1) Female DB15 connector for VGA.
One (1) USB Type B connector.
One (1) RJ45S for Ethernet connectivity.
One (1) 3.5mm jack for Audio-Iin.
One (1) 2.1mm jack for power.

Maximum Distance

Based on a maximum length of 6.6ft (2m)
of HDMI cable per end.

Cat5e/6: 330ft (100m)

Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross­connection reduces the effective distance depending on the grade of twisted cable used.

Latency

Typical one (1) frame (16ms)

Compression

JPG2000

Bandwidth

Up to 500Mbps

Network Requirement

1 Gig Ethernet with IGMP, Jumbo Frames and PoE

RJ45 Pin Configuration

Reverse Polarity Sensitive. Use EIA/TIA
568A or 586B straight-through wiring.

RJ45 Link

Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)

Power Source

This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a
PoE (PSE) Ethernet Switch. If required, an optional power supply may be purchased separately (see West
Penn Wire website product page for more details).

PoE

IEEE 802.3af

Power Consumption

3W

Temperature

Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing

Dimensions

5.03” x 4.53” x 1.66 (128mm x 115mm x 42mm)

Weight

1.35 lb (0.61 kg)

Compliance

Regulatory: FCC, CE, RoHS Flammability: 94V0

Warranty

3 years

Order Information

AV-IP-WP772-AL HDMI/VGA/USB IP Wall Plate Transmitter (Aluminum) (UPC: 612825417705)
AV-IP-WP772-WH HDMI/VGA/USB IP Wall Plate Transmitter (White) (UPC: 612825417682)

Companion Product

May be paired with the HDMI/USB IP Receiver (model AV-IP-RX-776)

Overview:

The HDMI/VGA/USB IP Wall Plate Transmitter installs in a
double-gang wall box to provide a convenient interface for HDMI /
VGA input sources to be extended to one or more displays, and
USB 2.0 connectivity to manage Smart White Boards and other
USB based devices. The unit has one HDMI-In, one VGA-In with
Audio-In, one USB Type b port, and one Ethernet Port. It supports
video up to 3840x2160 @ 30Hz, and VGA up to 1920x1200 @
60Hz. The HDMI/VGA/USB IP Wall Plate Transmitter allows
HDMI, VGA and USB equipment to be extended up to 330ft
(100m). The unit supports a push button switch and auto
switching to select between the HDMI and VGA inputs. The
device may be powered via a PoE enabled 1Gig Ethernet Switch.

Applications:

 Commercial and residential AV systems
 K6 and K12 classroom AV systems
 Digital signage
 Boardroom systems
 Collaborative PC systems
 Medical information systems

HDMI/VGA/USB IP Wall Plate Transmitter

AV-IP-WP772

Key Features:

 Extend HDMI, VGA with 2CH Audio, and USB 2.0 up to 330ft

(100m) over Cat5e/6 cable

 Supports HDMI video up to 4K (3840x2160) @ 30Hz
 Supports VGA video up to 1920x1200
 Selectable HDMI / VGA with Audio inputs, with auto switching

capability

 Supports point-to-point, point-to-multipoint and multipoint-to-

multipoint applications

 Supports 100’s of devices depending on network bandwidth
 PoE powered
 Controllable via IP Device Controller (AV-IP-NC811)

© West Penn Wire 2018 AV-IP-WP772

HDMI/VGA/USB IP Wall Plate Transmitter

West Penn Wire | 2833 West Chestnut Street, Washington, PA, USA 15301

Tel: [phone] | E-mail: [e-mail] | www.westpennwire.com

AV-IP-WP772

_____________________________________________________________________________________

Typical Application

© West Penn Wire 2018 AV-IP-WP772