West Penn AV-IP-RX776 Specsheet

HDMI/USB IP Receiver

Specifications

Environment

HDMI, VGA and USB connectivity.

Devices

Blu-Ray, projectors, monitors, TV, PC, laptops, servers, and Smart White Boards.

Bandwidth

225MHz

Signals

HDMI 1.3 (1080p/60Hz), USB 2.0 and HDCP 1.4.

Connectors

Note: Cables not included.

One (1) HDMI receptacle.
Four (4) USB Type A connectors.
One (1) RJ45S for Ethernet connectivity.
Two (2) 3.5mm jacks for Audio-Out and Mic-In.
One (1) 2.1mm jack for power.

Maximum Distance

Based on a maximum length of 6.6ft (2m)
of HDMI cable per end.

Cat5e/6: 330ft (100m)

Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross­connection reduces the effective distance depending on the grade of twisted cable used.

Latency

Typical one (1) frame (16ms)

Compression

JPG2000

Bandwidth

Up to 315Mbps

Network Requirement

1 Gig Ethernet with IGMP, Jumbo Frames and PoE

RJ45 Pin Configuration

Reverse Polarity Sensitive. Use EIA/TIA
568A or 586B straight-through wiring.

RJ45 Link

Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)

Power Source

This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a
PoE (PSE) Ethernet Switch. If required, an optional power supply may be purchased separately (see West
Penn Wire website product page for more details).

PoE

IEEE 802.3af

Power Consumption

2.55W

Temperature

Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing

Dimensions

4.40” x 5.08” x 1.00” (112mm x 129mm x 25mm)

Weight

1.5lbs (0.68kg)

Compliance

Regulatory: FCC, CE, RoHS Flammability: 94V0

Warranty

3 years

Order Information

AV-IP-RX776 HDMI/USB IP Receiver (UPC: 612825417668)

Companion Product

May be paired with the HDMI/VGA/USB IP Wall Plate Transmitter (model AV-IP-WP772-WH & AV-IP­WP772-AL).

AV-IP-RX776

Overview:

The HDMI/USB IP Receiver is able to receiver AV signals
transmitted by the HDMI/VGA/USB IP Wall Plate Transmitter
(model: AV-IP-WP772) over an IP network, and allows HDMI
displays and USB devices such as Smart White Boards to be
extended up to 330ft (100m). The unit has one HDMI-Out, two
USB 2.0 Type A ports, two USB 1.1 Type A ports, one Audio-Out
port, one Mic-In port, and one Ethernet Port. It supports HDMI up
to 1920x1080 @ 60Hz. The device supports PoE and may be
powered via a PoE enabled 1Gig Ethernet Switch.

Applications:

 Commercial and residential AV systems
 K6 and K12 classroom AV systems
 Digital signage
 Boardroom systems
 Collaborative PC systems
 Medical information systems

Key Features:

 Extend HDMI and USB 2.0 up to 330ft (100m) over Cat5e/6 cable
 Compatible with AV-IP-WP772 Wall Plate Transmitter
 Supports HDMI video up to 1080p @ 60Hz
 Supports two (2) USB 2.0 & two (2) USB 1.1 Type A ports
 Supports an Audio-Out (for audio extract) and Mic-In port
 Supports point-to-point, point-to-multipoint and multipoint-to-

multipoint applications

 Supports 100’s of devices depending on network bandwidth
 PoE powered
 Controllable via IP Device Controller (AV-IP-NC811)

© West Penn Wire 2018 AV-IP-RX776

HDMI/USB IP Receiver

West Penn Wire | 2833 West Chestnut Street, Washington, PA, USA 15301

Tel: [phone] | E-mail: [e-mail] | www.westpennwire.com

AV-IP-RX776

_____________________________________________________________________________________

Typical Application

© West Penn Wire 2018 AV-IP-RX776