West Penn 48458-C6A Specsheet
Detailed Specification & Technical Data
48458-C6A
48 Port Cat6A Patch Panel
PRODUCT OVERVIEW -
Product Description 48 Port Cat 6A UTP Patch Panel
Product Overview Category 6A Patch Panels are designed to meet 10 Gigabit Ethernet IEEE 802.3an rev. 1.0 transmission requirements and are
Package Qty. 1
guar-anteed to exceed ANSI/TIA-568-C.2 performance specications. ese high-density panels are available in 24- and 48port versions featuring a rolled edge steel construction, which provides maximum strength and durability and eliminates panel
ex during termina-tion. Panels feature port labeling areas and port numbering for easy circuit identication.
Panels are supplied preloaded with 10G connectors supporting both T568A and T568B wiring using an easy-to-read colorcode wiring label and can be terminated using standard single-position 110 termination tool. is new connector design
provides enhanced plug-to-jack connection integrity, protects against damage caused by insertion of 4- or 6-position plugs and
is rated for a minimum of 750 plug insertions providing for the highest level of system reliability.
Jacks feature the ability to mount either color-coded icons for service identication or dust covers to protect unused jacks from
dust and other contaminants. Rear 110 contacts provide improved conductor retention and ease of termination. Jacks are supplied with a metallized plastic cable protection cap, which eliminates alien crosstalk for maximum performance.
Panels are provided with a newly designed cable management bar(s) that easily mounts to the back of the panel without the
need for mounting screws. is cable management bar features improved cable routing and strain relief.
PRODUCT FEATURES -
Features • Connector transmission performance meets or exceeds TIA-568-B.2-10 channel level performance specications.
• Termination is made quick and easy using a tool-less termination.
Rear cable management bar.
• Connector contact design provides enhanced plug to jack connection integrity and protects against damage
caused by insertion of 4 or 6 position plugs.
• Connectors are rated for at least 750 plug insertions providing for the highest level of system reliability.
• Maximum strength and durability construction.
SPECIFICATIONS & DIMENSIONS -
Transmission Performance ANSI/TIA-568-B.2-10: Meets or exceeds category 6A (1-500 MHz) channel specications
Jack Type 8p8c (8-position, 8-contact) “RJ45” style
Wiring Scheme ANSI/TIA/EIA-568-B.2: T568A & T568B
Mounting Dimensions Panel: 19” rack mountable
Physical Characteristics Panel: steel/Ni plated steel
Electrical/Optical Characteristics Insulation resistance: min 500 MOhm @ 100 Vdc
Environmental Characteristics Storage: -40°C - +70°C (-40°F - +158°F)
Warranty 5-year limited component warranty
ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)
1.5 in deep (w/o cable management bar)
6.0 in deep (with cable management bar installed)
1.75 in (1 RMU) high (24458S-C6A)
3.50 in (2 RMU) high (48458S-C6A)
Jacks: W 17.0 mm D 41.8 mm H 19.3 mm
W 0.67 in D 1.65 in H 0.76 in
Cable management bar: steel/Ni plated steel
Jack housing: screened case: copper, 0.25 mm (0.0098 in), 100 μin nickel plated
contact holder: high impact thermoplastic, UL94V-0 re retardant
Jack contacts: phosphor bronze alloy plated with min 50 μin of gold over 70-100 μin of nickel plating
Jack IDC: 110 type, phosphor bronze alloy with 100 μin 100% tin alloy
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min
Spring wire contact resistance: max 20 Mohm
IDC contact resistance: max 2.5 MOhm
Current rating: see gure
Operation: -10°C - +60°C (+14°F - +140°F)
RH (operation): max non-condensing 93%
10-year Signamax Link/Channel Warranty
15-year Signamax Extended Component Warranty
25-year Signamax Cabling System Warranty
2833 West Chestnut Street | Washington, PA 15301 | Toll Free: 800-245-4964 | www.westpenn-wpw.com
Loading...