West Penn 450 Data Sheet

Technical Data Sheet
Communication Cables

PART NUMBER:

DESCRIPTION: 22/2 Solid bare copper conductors, shielded with an overall jacket.

NEC RATING: CMR, NEC Article 800

APPROVALS: (UL) C(UL) Listed or c(ETL)us Listed

APPLICATION: Indoor for: Intercom, Security, Sound, Audio, Background Music, and Power Limited Control

2833 West Chestnut Street

Washington, PA 15301

Toll Free: [phone]

Fax: [phone]

www.westpenn-wpw.com

450

Circuits.

Construction Parameters:

Conductor 22 AWG Bare Copper
Stranding Solid
Insulation Material Polypropylene
Insulation Thickness 0.006'' Nom.
Number of Conductors 2 (1 Pair)
Shield 100% Aluminum Polyester Foil
Drain Solid Tinned Copper
Jacket Material PVC
Jacket Thickness 0.020'' Nom.
Overall Cable Diameter 0.118'' Nom.
Approximate Cable Weight 13 Lbs/1M' Nom.
Flame Rating UL 1685 Vertical Tray

Electrical & Environmental Properties:

Temperature Rating -20°C To +60°C
Operating Voltage 300 V RMS
Max.Capacitance Between Conductors @ 1 KHz 34 pf/ft Nom.
Capacitance Between Conductors to Shield @ 1 KHz 67 pf/ft Nom.
DC Resistance per Conductor @ 20deg C 17.5 Ohms/1M' Nom.
Insulation Colors Black, Red,
Jacket Color Black
RoHS Compliant --

Mechanical Properties:

Max. Recommended Pull Tension 28 Lbs.
Min. Bend Radius (Install) 1.18”

Specification Issue Date: 7/06 Rev.1 5/07

This document is the property of West Penn Wire.

.

The information contained herein is considered
Proprietary and not to be reproduced by any means
Without written consent of West Penn Wire

Standard Lengths are 1000ft.
The Jacket is sequentially footmarked.
The information presented here is, to the best of our
knowledge, is true and accurate. However, since
conditions of use are beyond our control, all
recommendations or suggestions are presented
without guarantee or responsibility on our part. We
disclaim all liability in connection with the use of
information contained herein or otherwise.