West Penn 293GY0500, 293GY1000 Specsheet

2833 West Chestnut Street

This document is the property of West Penn Wire.

Standard Lengths a re 1000ft.

Technical Data Sheet
Communication Cables

PART NUMBER:

DESCRIPTION: 18/2 Stranded bare copper conductors, shielded with an overall jacket.

NEC RATING: CMR, NEC Article 800

APPROVALS: (UL) C(UL) Listed or c(ETL)us Listed

APPLICATION: Communications Cable for Riser

Construct ion Parameters:

Conductor 18 AWG Bare Copper
Stranding 7x26
Insulation Material Polypropylene
Insulation Thickness 0.008'' Nom.
Number of Conductors 2
Shield 100% Aluminum Polyester Foil
Drain Stranded Tinned Copper
Jacket Material PVC
Jacket Thickness 0.017'' Nom.
Overall Cable Diameter 0.160'' Nom.
Approximate Cable Weigh t 20.9 Lbs/1M' Nom.
Flame Rating UL 1666 Ri ser Flame Test

Electrical & Environmental Properties:

Temperature Rating -20°C To +60°C
Operating Voltage 300 V RMS
Max.Capacitance Between Conductors @ 1 KHz 40 pf/ft Nom.
Capacitance Between Conductors to Shield @ 1 KHz 79 pf/ft Nom.
DC Resistance per Conductor @ 20deg C 6.6 Ohms/1M' Nom.
Insulation Colors Black, Red
Jacket Color Gray
RoHS Compliant Yes

Mechanical Properties:

Max. Recommended Pu ll Tension 57.5 lbs.
Min. Bend Radius (Install) 1.6”

Specification Issu e Date: 7/14

.

The inform at i o n contained herein is consider ed
Proprietary and not to be reproduced by any means
Without written consent of West Penn Wire

293

Washington, PA 15301

Toll Free: [phone]

Fax: [phone]

www.westpenn-wpw.com

The Jacket is sequential ly footmarked.
The information presented here is, to the best of our
knowledge, is true and accurate. However , since
conditions of use are beyond our control, all
recommendations or sugg estions are presented
without guarantee or resp onsibility on our pa r t. We
disclaim all liability in connection with the use of
information contain ed herein or otherwise.